 |
|
|
Products
Graco set the industry standard for 1K, 2K and hot melt systems!
Whether you need a consistent bond, accurate proportioning equipment, or a reliable way to transfer, meter and dispense materials, Graco's sealant and adhesive equipment offers performance you can trust.
View our website for Liquid Control automation equipment.
View our website for Profill material repackaging services.
Equipment
 Stand-alone rotary pump metering system. Fully-programmable flow rate and mix ratio reduces operator training time and waste.  Meter, mix, dispense valve. For two-component epoxies, urethanes, silicones and most reactive resin systems.
 Fixed and variable ratio meter, mix, dispense system. For applications such as potting, gasketing, sealing, encapsulation and syringe filling.  Designed to accurately dispense and mix plural-compoent sealants and adhesives.
 Meter, mix and dispense system offers exact preset ratio setting and ease of operation.  Built to dispense large amounts of adhesive and tooling paste materials, this system is ideal for applications in the wind-energy market.
 Variable-Ratio Meter, Mix & Dispense Machine for Solventless Laminating Adhesives.
Automation
 Benchtop unit for small parts production.  Contour dispensing motion platform for bonding, sealing, gasketing, potting, and automated molding applications.
 Contour dispensing motion platform for bonding, sealing, gasketing,
automated molding and scripting (doming) applications.  Point-to-point automation platform for the electronics and general assembly markets.
Electronic Proportioners
 Works in connection with a variety of flow meters to monitor flow in mechanical proportioners, thus assuring on-ratio performance.  The most complete system for dispensing sealants that use booster paste to speed cure of structural sealants.
Mechanical Proportioners
 Fully-contained proportioning and dispense system. For two- component materials used in concrete joint sealing, dowel bar anchoring and general product assembly.  Plural-component fixed and variable ratio proportioner. Provides precise positive displacement metering using double-acting cyclinders.
 Plural-component proportioner. For high viscosity materials with ratios from 4:1 to 16:1.
Hot Melt
 Pressure compensating valves are designed to operate in conjunction with the displacement pump to eliminate material flow variances.  Maintains fluid pressure for consistent bead control of sealants and viscous materials.
 Hot melt supply system. For handling abrasive, high-viscosity hot melt sealants and adhesives for 55 gal (200 l) drums.  Hot melt supply system. For abrasive, high-viscosity hot melt sealants and adhesives for 5 gal (20 l) drums.
 Designed for use with Therm-O-Flow Systems. Provides precise proportional control and variable dispense volume with its unique tapered needle valve design.
RAM Packages with NXT Technology
 New technology improves process control. Proven Graco NXT, Check-Mate and DuraFlo technologies plus new advanced features help to minimize maintenance and streamline operations.
Modules
 Ideal for use in automotive paint shops where increased fluid pressure is necessary.  High-volume material feed system. For applications where underbody material is sprayed and sealing beads are applied to a car body.
 Precision dispense valve. For small-scale assembly operations.
 Ensures a precisely controlled, continuous flow of single-component materials, resulting in smooth, consistent beads, dots and spray patterns.  Electronically controlled fluid metering system that provides precise and reliable closed-loop metering and dispensing of sealants and adhesives for automotive and industrial applications.
 Provides accurate dispensing, bonding and sealing of sealants and adhesives for automotive applications.  Continuous bead flow means faster production cycle times since you eliminate the need to reload material typically required by shot meter systems.
Applicators
 Sealant guns replace caulk guns in high-volume operations.  Offer precise control of low viscosity sealant and adhesive materials.
 The Optimiser 2K is made of a lightweight composite material that reduces operator fatigue yet is tough enough for the rigors of industrial use.  Graco manufactures a number of pistol grip flow guns to meet the needs of a variety of end-users.
 Rugged in design, prevents premature introduction of base and catalyst materials within the control manifold.  Sealant guns are ideal for use with silicones, acrylics and urethanes in single component applications.
 Entry-level ease-of-use combined with high performance. This metering system provides real-time closed-loop metering & dispensing of ambient & hot melt sealants & adhesvies.  Severe-duty pistol grip dispense guns. Dispenses high viscosity industrial and automotive sealants and adhesives.
 Pistol grip dispense gun. Dispenses low-to-medium viscosity industrial and automotive sealants and adhesives.
Valves
 These valves are top-of-the-line, lightweight, compact valves designed for long service.  Two-component valve. Dispenses 2K metered fluids into a low-cost disposable mixer selected for your
operation.
 Graco offers a variety of sizes and pressure ranges to fit your application requirements.  Airless sealant and adhesive valve. For streaming, spray, and extrusion.
 Positive displacement metering rod valve. For shot-to-shot (1052) or bead (1053) dispensing for a variety of materials. 1052 shot range: 0.002 to 1.8 cc's. 1053 shot range: 0.002 to 3.6 cc's.  Rod positive displacement valve with luer lock needle. Precision repeatable shot-to-shot (1092) or bead (1093) dispensing. 1092 shot range is 0.024 - 9.6 cc's, 1093 is 0.193 - 14.479 cc's.
 Positive displacement metering rod valve. Larger volume dispensing solution from 0.4 - 52.0 cc's. Provides higher flow rates and viscosity in continuous or controlled shot dispensing.  Positive displacement metering rod valve. Compact and cost- effective dispensing solution for lower volumes in dot or metered shot dispense. Shot range: 0.001 to 0.254 cc's.
 Positive displacement metering rod valve. For corrosive fluxes, lubricants, anaerobics, acrylics, epoxies, filled materials, and more. Shot range: 0.10 to .0503 cc's.  On/off pinch tube valve dispenses continuous bead or potting in low-pressure feed applications. Shot Size is continuous.
 On/Off needle dispense valve. For sealing, bonding and gasketing applications of silicones and epoxies. Shot size is continuous.  Valve ideal for applications requiring rapid on/off control and material snuff back. It is equally capable of dispensing dots for bonding and beads for sealing or gasketing appllications.
 On/off pinch tube valve is higher flow rate design with needle block outlet to dispense continuous bead or potting applications.  Positive displacement pinch tube dispense valve. Accepts several sizes of pinch tubes to attain the desired volumetric output. Shot range: 0.0013 to 0.0141cc's.
 Positive displacement pinch tube dispense valve. Accurately dispenses repeatable shots of dispensable materials. Shot range: 0.0002 to 0.0113 cc's.  Disposable pinch tube. Dispensing epoxies, solder creams, brazing compounds, greases, acrylics and other materials. Shot range: 0.0188 to 0.4854 cc's.
Designed to accurately dispense and mix plural-compoent sealants and adhesives.
Metering Valves
 Automatic Metering Valve. Provides accurate dispensing on a repetive basis. Shot range: 0.2 to 4.0 cc's.  Micro Metering Valve. For accurate shot metering during small parts assembly and encapsulation.
 fluid mixers merge resin and catalyst materials together accurately.  Protects precision dispensing systems from contaminants introduced from the main supply line.
 Bulk Supply and Manual Brush
|
| |
|
