Graco
Products

Products
Where to Buy
Customer Service
Tech Support
Site Map
Contact Us



 
Senator 4:1 Sanitary Drum Unloader
Sanitary Home > Unloaders > Senator 4:1 Sanitary Drum Unloader

Senator 4:1 Sanitary Drum Unloader

Senator 4:1 Sanitary Drum Unloader

USDA-accepted FT-14 quick knock-down pump

The Senator 4:1 sanitary pump is constructed of 316 stainless steel, with a 2 in (50.8 mm) sanitary tube flange outlet and can be fitted into open-head drums or directly inserted into a 4.5 in (114 mm) closed-head drum bung. It is an on-demand pump; by closing the outlet or dispense valve, the pump will stop until flow is again required.

This USDA-approved pump can be taken apart in less than 5 minutes for those applications that require daily sanitation, and can empty a drum in less than 3 minutes when pumping somewhat flowable to moderately flowable fluids.

 

  • Evacuation rates up to 14 gpm, running at 60 cycles per minute
  • 400 psi (27 bar, 2.8 MPa), outlet pressure
  • Improved plate design with inflatable wiper seals, allows for faster change out of drums
  • Available in double ball and priming piston designs for additional system flexibility
  • Available packages designed to fit 21.5 in (54.6 cm), 22.5 in (57.1 cm), 23.0 in (58.42 cm), and 23.25 in (59.06 cm) 55-gallon container sizes
 

 

  • Jam and jelly
  • Soft peanut butter
  • Heavy chocolate
  • Tomato paste
  • Fudge
 

 

  • Unloading of somewhat flowable to moderately flowable fluids, from the original 55-gallon containers without the need to reduce the viscosity through liquid injection
 

0