Graco Inc.

PGM Metering System

Precision gear metering and dispense system for superior bead control

Where to BuyRequest Info
Share |

Boost productivity with PGM's superior bead control and high flow rates

The Graco PGM Metering System delivers a smooth, consistent bead dispense – even with high-viscosity materials. And because it also provides higher flow rates, manufacturing facilities can dramatically improve production capacity and ROI.


Ideally suited for:
• Solar panel manufacturing
• Automotive windshield manufacturing

Handles a range of materials:
• Ambient, warm melt and hot melt materials to 400°F (204°C)
• Low to high-viscosity materials
• Unlimited volume

PGM Metering System-1

Improve your production capacity with PGM's high flow rates

  • Provides high flow rates:
    • Up to 600 cc/min for ambient materials
    • Up to 300 cc/min for high viscosity hot melt materials
  • Smooth, consistent bead dispense - even at high flow rates
  • Offers clean starts and stops for less material waste
  • Bead control saves material costs
  • Wrist-mountable design assures precise dosing control
  • Touch-screen controls are easy to use, easy to integrate

View values in metric units. View values in U.S. units.
PGM
Volume Repeatability
+/- 1%
+/- 1%
Minimum Flow Rate
20 cc/rev model: 40 cc/min
20 cc/rev model: 40 cc/min
Maximum Flow Rate
20 cc/rev model: 10 cc
20 cc/rev model: 10 cc
Maximum Fluid Working Inlet Pressure
1500 psi
10.3 MPa/103 bar
Maximum Fluid Working Outlet Pressure
2500 psi
17.2 MPa/172 bar
Air Supply Pressure Range
60-100 psi (filtration required)
60-100 psi (filtration required)
Fluid Filtration Required
200 mesh minimum
200 mesh minimum
Viscosity Range of Fluids
1,000-1,000,000 Poise
1,000-1,000,000 Poise
Wetted Parts
Stainless Steel, Tool Steel, Chrome, Carbide, Acetal Plastic, PTFE, Chemical Resistant O-Rings
Stainless Steel, Tool Steel, Chrome, Carbide, Acetal Plastic, PTFE, Chemical Resistant O-Rings
Power Requirements
Fuse Rating: 21A
Fuse Rating: 21A
Power Supply Voltage Range
240VAC, 50-60 Hz, single phase
240VAC, 50-60 Hz, single phase
Sound Pressure Level at Maximum Flow Rate
20 cc/rev model: 72 dB(A)
20 cc/rev model: 72 dB(A)
Sound Power Level at Maximum Flow Rate
20 cc/rev model: 79 dB(A)
20 cc/rev model: 79 dB(A)
Operating Humidity Range
10-90% non-condensing
10-90% non-condensing
Overall Dimensions
6 cc/rev Model
19.75 H x 9.38 W x 6.6 D in
50.17 H x 23.83 W x 16.76 D mm
20 cc/rev Model
21.75 H x 9.5 W x 8.9 D in
55.25 H x 24.13 W x 22.6 D mm
Controls
30 H x 24 W x 12 D in
76.2 H x 60.96 W x 30.48 D mm
Weight
6 cc/revModel
30 lb
13.61 kg
20 cc/rev Model
60 lb
27.22 kg
Controls
100 lb
45.36 kg
Operating Temperature Range
Control
40 to104°F
4 to 40°C
Heated Pump
40 to 400°F
4 to 204°C
Ambient Pump
40 to 120°F
4 to 49°C