Graco Inc.

TrueCoat Pro-X Fine Finish  Cordless Airless Sprayer

咨询信息

The TrueCoat Pro Fine Finish cordless sprayer is designed specifically for small fine finish projects. This sprayer features a ProControl Pressure Control System that allows you to optimize the pressure setting for spraying a full range of fine finish materials – from stains to lacquers to enamels. Innovative design features make this a unique sprayer that is fully compatible with solvent-based materials including “hot” solvents.

Benefits

  • Small, compact design is ideal for fine finish applications
  • ProControl System - Allows for independent adjustment of pressure and flow rate
  • Patented ProSpray Technology. Comparable performance to Graco's professional airless sprayers
  • Sprays material as designed by the paint manufacturer - no thinning required
  • Consistent, even spray pattern for one-pass coverage
  • Patented ProSpray Piston Pump Technology
    • Ready to spray in seconds!
    • Ultimate portability to move around on the job.
    • Professional quality finish.
  • ProSpray™ 可逆喷嘴
    RAC®(反向自清洗喷嘴); 如果喷嘴中有塞子,只需转动喷嘴、将塞子喷出,便可继续正常喷涂。 集成了 ProSpray 喷嘴和护罩,避免吐出并实现完美精细表面。 绿色精细表面涂饰喷嘴实现更为精细的霧化效果。
  • Lithium-Ion Battery Charger + 2 Batteries
    Charge time for 80% performance is 25 min.
  • Pressure Control Knob
    Allows to optimize pressure resulting in very fine regulation of material flow adjusted to application.
  • High/Low Switch
    Change motor and pump speed: I = for lower flow, ideal for detailed work, II = for higher flow, ideal for high production spraying
  • 喷嘴尖过滤器
    直接穿过防护装置和过滤器涂料,减少了喷嘴塞的数量。 具备 60 目和 100 目两种型号。
  • Transparent 0.75 L Paint Cup
    With adjustable suction tube, enables spraying in any direction. Floors, ceiling and walls. Disposable cup liners for fast and easy clean-up. Includes a cover for paint storage or quick-shake cleaning.
  • 修理配件包
    简单的维修工作就可使喷涂机的使用寿命延长一倍,由 200 l 达到 400 l
  • Sprayer storage case
    •     Extra room for tips, filters and paint supplies
    •     Convenient carrying from job-to-job
    •     Protects all components inside
  • 独立设计
    平衡设计,便于存放和置于工地上。

Fine Finish Hand-Held Paint Sprayer, Operation
Sprayer
Adjustable Pressure Range
500 to 1500 psi
34 to 103 bar, 0.34 to 10.3 MPa
Maximum Working Pressure
1700 psi
117 bar, 11.7 MPa
Weight
5.0 lb
2.25 kg
Dimensions
Length
13.75 in
34.9 cm
Width
5.5 in
14.0 cm
Height
9.7 in
24.6 cm
Storage Temperature Range. Pump damage will occur if fluid freezes in pump. Damage to plastic parts may result if impact occurs in low temperature conditions.
32° to 113°F
0° to 45°C
Operating Temperature Range, changes in paint viscosity at very low or very high temperatures can affect sprayer performance.
40° to 90°F
4° to 32°C
Storage Humidity Range
0% to 95% relative humidity, non-condensing
0% to 95% relative humidity, non-condensing
Sound Pressure Level per ISO 3744 measured at 3.1 feet (1m)
79.5 dBa (for sound power level, add 11 dBa)
79.5 dBa (for sound power level, add 11 dBa)
Vibration Level Acceleration per ISO 5349, no load condition
Less than 8.2 ft/s²
Less than 2.5 m/s²
Charger
Charging Time
25 minutes to 80%, 40 minutes to 100%
25 minutes to 80%, 40 minutes to 100%
Power Source
120 VAC
120 VAC
Battery
Voltage
18 VDC, Lithium Ion
18 VDC, Lithium Ion
Capacity
1.2 Ah, 21.6 Wh
1.2 Ah, 21.6 Wh