Graco Fluid Automation Model 201 Series
10:1 meter-mix machines for injection molding of liquid silicone rubber (LSR)
Models 201, 201H & 201B
Common Features
- 8 in air cylinder
- Low level and low pressure indicators
- Adjustable catalyst
- Gravity fed catalyst tanks
- Direct from drum resin feed
Model 201 Added Features
- 1 in O.D. static mixer
- *Solvent flush system
- ¾ in ball valve outlet
Model 201B Added Features
- 1 in O.D. static mixer
- Base purge system
- ½ in ball valve outlet
Model 201H Added Feature
- SG225 Gun with disposable static mixers
ACCESSORIES
- SK530 – Catalyst feed tank agitator
- Additional third stream metering for oils and pigments
- Catalyst agitator
- SG225 – Hand gun assembly with disposable static mixers
- B240 – Industrial metering pump (Standard on 201GH-LR model)
SPECIFICATIONS
- Viscosity range: 20,000 to 200,000 centipoise (cps)
- Flow rate (Model 201): Up to 8 lb/min of 100,000 cps mix; up to 15 lb/min of 20,000 cps mix
- Flow rate (Model 201H with SG225 handgun): 2 to 4 lb/min
- Maximum output pressure: 3,000 PSI
- Ratio range: 7:1 to 15:1 by volume
- Air requirement: 10 cfm @ 100 psi
- Power requirement: 120 vac / 50-60 cycle / single phase
- Electrical current requirement: 3 amps
- Weight: 700 lbs
- Height requirement (extended): 107 in (272 cm)
- Height requirement (retracted): 70 in (178 cm)
HELPFUL RESOURCES
Fluid Automation Overview page
To request a manual, please send an email to fluidautomation@graco.com
Models 201G-LR, 201GH-LR, 201GB-LR & 201G3-LR
Common Features:
- 8 in air cylinder
- Low level and low pressure indicators
- Adjustable catalyst
Model 201G-LR Added Features
- Gravity fed resin and catalyst tanks
- 6 ft outlet hose
- 1 in O.D. static mixer
- Solvent flush system*
- ¾ in ball valve outlet
*Model 201GB-LR
This model has the same features as 201G-LR, except it offers a base purge system in place of the solvent flush.
Model 201G3-LR
This model has the same features as Model 201G-LR, plus it offer a 3rd stream slave pump
Model 201GH-LR Added Features
- Gravity fed base and catalyst tanks
- 10 ft A and B hoses with portable gun
- SG225 Dispensing gun
- Disposable static mixers
- No solvent flushing required
Accessories
- SK530 – Catalyst feed tank agitator
- SG225 – Hand gun assembly with disposable static mixers
- B240 – Industrial metering pump (Standard on 201GH-LR model)
Specifications
- Viscosity range: 20,000 to 200,000 centipoise (cps)
- Flow rate: Up to 8 lb/min of 100,000 cps mix; up to 15 lb/min of 20,000 cps mix
- Maximum output pressure: 3,000 PSI
- Ratio range: 7:1 to 15:1 by volume
- Air requirement: 10 cfm @ 100 psi
- Power requirement: 120 vac / 50-60 cycle / single phase
- Electrical current requirement: 3 amps
- Weight: 1,000 lbs
- Height requirement: 75 in (190 cm)