Graco Inc.

Volumenzähler  Für Dosiergeräte

Eine Vielzahl von Getriebe- und Massenvolumenzählern für Anwendungen der Oberflächenbehandlung

HändlersucheInformationen anfordern

Gracos Getriebe- und Massen-Volumenzähler sind selbst bei niedrigen Durchflussraten sehr präzise. Unsere Meter sind ideal für Lackieranwendungen mit den meisten Farben und Harzen auf Lösungsmittel- und Wasserbasis.

G250/G250 HR, G3000/G3000 HR und S3000

  • Verdrängungsvolumenzähler mit Stirnradgetriebe
  • Für nicht abrasive und ungefüllte Materialien entwickelt
  • Hochpräzise selbst bei niedrigen Durchflussraten
  • Kompatibel mit Edelstahl um nieder- und mittelviskose Materialien zu bewältigen
  • ETL US-, ATEX- und CE-Zeichen

HG6000/HG6000 HR 

  • Verdrängungsvolumenzähler mit Schraubenradgetriebe
  • Für höhere Durchflussraten und hochviskose Materialien entwickelt
  • Hochpräzise selbst bei niedrigen Durchflussraten
  • Kompatibel mit Edelstahl und mittel- bis hochviskosen Materialien auf Wasserbasis
  • ATEX- und CE-Zeichen

Coriolis-Volumenzähler 

  • Berührungsfreier Massendurchflusszähler
  • Für alle abrasiven und gefüllten Materialien entwickelt
  • Kompatibel mit Edelstahl, Materialien auf Wasserbasis und Säuren für eine Vielzahl von Materialien
  • Verbraucht weniger Material beim Spülen
  • Große Bandbreite an Durchflussraten und Viskositäten
  • FM-, CSA- und ATEX- und CE-Zeichen
  • ID-Optionen von 1/4'' und 3/8''


Precision Pulse Volumetric Fluid Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
Models PPM 3050, 3100, 3550
2000 psi
140 bar
Models PPM 3050H, 3100H, 3550H
3000 psi
210 bar
Flow Range
Models PPM 3050/3050H
0.01–0.5 gal/min
38–1900 cc/min
Models PPM 3100/3100H
0.02–1.0 gal/min
75–3800 cc/min
Models PPM 3550/3550H
0.1–5.5 gal/min
380–21,000 cc/min
Flow Meter Connector Size
Models PPM 3050, 3100, 3550
1/4 bsp(m) x 1/4 npt(f)
1/4 bsp(m) x 1/4 npt(f)
Models PPM 3050H, 3100H, 3550H
M12 x 1.5(m) x 1/4 npt(f)
M12 x 1.5(m) x 1/4 npt(f)
Flow Meter Inlet/Outlet Size without Connector
Models PPM 3050, 3100, 3550
1/4 bsp(m)
1/4 bsp(m)
Models PPM 3050H, 3100H, 3550H
M12 x 1.5(m)
M12 x 1.5(m)
Maximum Fluid Temperature
Models PPM 3050, 3100, 3550
180°F
80° C
Models PPM 3050H, 3100H, 3550H
250°F
120° C
Maximum Ambient Temperature
113°F
45° C
Fluid Viscosity Range
15,000 cps
15,000 cps
Maximum Cable Length
200 ft
61 m
Wetted Parts
303 & 321 Stainless Steel, Tungsten Carbide, PTFE
303 & 321 Stainless Steel, Tungsten Carbide, PTFE

PRO Pulse Electronic Volumetric Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
2800 psi
19.6 MPa, 196 bar
Maximum Working Air Pressure
50 psi
350 kPa, 3.5 bar
Fluid Pressure Operating Range
0–2800 psi
0–19.6 MPa, 0–196 bar
Air Pressure Operating Range
20–50 psi
140–350 kPa, 1.4–3.5 bar
Air Inlet
1/4 inch OD tube
1/4 inch OD tube
Maximum Fiber Optic Cable Length
100 ft with two splices
30.5 m with two splices
Wetted Parts
Stainless Steel, PTFE
Stainless Steel, PTFE

Volumetric Fluid Flow Meter
U.S.
Metric
Maximum Fluid Working Pressure
G3000 and G3000HR
4000 psi
28 MPa, 276 bar
S3000 Solvent Meter
3000 psi
21 MPa, 210 bar
G250 and G250HR
300 psi
2.1 MPa, 21 bar
Flow Range
G3000 and G250
0.02-1.0 gal/min
75-3800 cc/min
G3000HR and G250HR
0.01-0.5 gal/min
38-1900 cc/min
S3000 Solvent Meter
0.01-0.5 gal/min
38-1900 cc/min
Maximum Cable Length
200 ft
61 m
Flow Meter Inlet/Outlet
1/4 npt(f)
1/4 npt(f)
Resolution
G3000 and G250
0.119 cc/pulse
0.119 cc/pulse
G3000HR and G250HR
0.061 cc/pulse
0.061 cc/pulse
S3000 Solvent Meter
0.021 cc/pulse
0.021 cc/pulse
Accuracy
G3000, G3000HR, G250, and G250HR
+/- 0.5% through communicated flow range for most commonly used coatings. Accuracy will diminish at low viscosities and low flow rates.
+/- 0.5% through communicated flow range for most commonly used coatings. Accuracy will diminish at low viscosities and low flow rates.
S3000 Solvent Meter
+/- 2.5% through communicated flow range.
+/- 2.5% through communicated flow range.
Supply Voltage
10-30 Vdc
10-30 Vdc
Entity Parameters
V max = 30 V; I max = 15 mA; Ci = 0.4 microfarads; Li = .01 mH
V max = 30 V; I max = 15 mA; Ci = 0.4 microfarads; Li = .01 mH
Approvals
SeXe front cover
SeXe front cover
Wetted Parts
G3000 and G3000HR
303 Stainless Steel, Tungsten Carbide, PTFE
303 Stainless Steel, Tungsten Carbide, PTFE
S3000 Solvent Meter
303 Stainless Steel, PTFE
303 Stainless Steel, PTFE
G250 and G250HR
303 Stainless Steel, Tungsten Carbide, PTFE
303 Stainless Steel, Tungsten Carbide, PTFE
15V804, 15V827, and 280555 Meter Kits
303, 304, 17-4, and 17-7 Stainless Steel, PTFE
303, 304, 17-4, and 17-7 Stainless Steel, PTFE
Weight
G3000 and G3000HR
6 lb
2.7 kg
S3000 Solvent Meter
6 lb
2.7 kg
G250 and G250HR
2.6 lb
1.8 kg

Piston Fluid Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
3000 psi
21 MPa,
Flow Range
0.01–2.6 gal/min
40–10,000 cc/min
Fluid Temperature Range
40–180 F
4–80 C
Maximum Ambient Temperature
180 F
80 C
Fluid Viscosity Range
0.3–20 cps
0.3–20 cps
Maximum Cable Length
200 ft
61 m
Flow Meter Inlet/Outlet
3/8 npt(f)
3/8 npt(f)
Resolution
≈ 0.105 χχ/πυλσε
≈ 0.105 χχ/πυλσε
Accuracy
+ 0.5 %*
+ 0.5 %*
Supply Voltage
4.5–15 Vdc
4.5–15 Vdc
Intrinsic Safety
Class 1; Div. 1; Group D
Class 1; Div. 1; Group D
V max.= 15 V
I max. = 15 mA
Ci = 0.2 ⃞f
Li = 0mH
Approvals
See instruction manual front cover
See instruction manual front cover
Wetted Parts
303 and 440C Stainless Steel, PTFE
303 and 440C Stainless Steel, PTFE
Viton is a registered trademark of the DuPont Company. * For most commonly used coatings, the flow meter reading will be accurate to within + 0.5%. Accuracy will diminish at low viscosities and low flow rates

Coriolis Fluid Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
Model 116158: 5000 psi (34 MPa, 345 bar) Model 15D135: 2300 psi (16 MPa, 160 bar)
Model 116158: 5000 psi (34 MPa, 345 bar) Model 15D135: 2300 psi (16 MPa, 160 bar)
Flow Range
0.01–0.5 gpm (40–2,000 cc/min)
0.01–0.5 gpm (40–2,000 cc/min)
Fluid Temperature
40–180 F
4–80 C
Maximum Ambient Temperature
180 F
80 C
Fluid Viscosity Range
0.8–2000 cps
0.8–2000 cps
Maximum Cable
200 ft
61 m
Flow Meter Inlet/Outlet
1/4 npt(f)
1/4 npt(f)
Resolution
≈ 0.119 χχ/πυλσε
≈ 0.119 χχ/πυλσε
Accuracy
+ 0.5 %*
+ 0.5 %*
Supply Voltage
24 Vdc
24 Vdc
Wetted Parts
303 and 440C Stainless Steel, PTFE
303 and 440C Stainless Steel, PTFE
* For most commonly used coatings, the flow meter reading will be accurate to within + 0.5%. Accuracy will diminish at low viscosities and low flow rates.



Helical Gear Fluid Flow Meters
U.S.
Metric
Maximum Working Fluid Pressure
6000 psi
41 MPa, 410 bar
Flow Range
Models 246190, 246340, 280560, 15V820, and 24R174: 0.05 to 6.0 gpm (190 to 22,712 cc/min): Models 246652 and 24P688: 0.05 to 2.0 gpm (190 to 7571 cc/min.)
Models 246190, 246340, 280560, 15V820, and 24R174: 0.05 to 6.0 gpm (190 to 22,712 cc/min): Models 246652 and 24P688: 0.05 to 2.0 gpm (190 to 7571 cc/min.)
Maximum Operating Temperature
Models 246190, 246652, and 24P688: 180° F (82° C) Models 280560 and 15V820: 140° F (60° C) Models 246340 and 24R174: 400° F (204° C)
Models 246190, 246652, and 24P688: 180° F (82° C) Models 280560 and 15V820: 140° F (60° C) Models 246340 and 24R174: 400° F (204° C)
Maximum Ambient Temperature
Models 246190, 246652, 246340, 24P688, and 24R174: 180° F (80° C) Models 280560 and 15V820: 140° F (60° C)
Models 246190, 246652, 246340, 24P688, and 24R174: 180° F (80° C) Models 280560 and 15V820: 140° F (60° C)
Fluid Viscosity Range
30 - 1,000,000 cps
30 - 1,000,000 cps
Maximum Cable Length
200 ft
61 m
Flow Meter Inlet/Outlet
3/4 npt(f)
3/4 npt(f)
Resolution (K-Factor)
Models 246190, 246340, 280560, 15V820, and 24R174 - (0.286 cc/pulse) (3500 pulses/liter) Models 246652 and 24P688 - (0.143 cc/pulse) (7000 pulses/liter)
Models 246190, 246340, 280560, 15V820, and 24R174 - (0.286 cc/pulse) (3500 pulses/liter) Models 246652 and 24P688 - (0.143 cc/pulse) (7000 pulses/liter)
Accuracy
+/- 0.25%*
+/- 0.25%*
Repeatability
+/- 0.1%
+/- 0.1%
Supply Voltage
10 - 30 Vdc
10 - 30 Vdc
Typical Current
15 mA
15 mA
Approvals
CE: Models 246190, 246652, 246340, 280560, 24P688, and 24R174 EX: Model 15V820 only
CE: Models 246190, 246652, 246340, 280560, 24P688, and 24R174 EX: Model 15V820 only
Wetted Parts
303 Stainless Steel, 440 SST, Carpenter Technology 7-mo Plus® Duplex SST, Tungsten Carbide, PTFE
303 Stainless Steel, 440 SST, Carpenter Technology 7-mo Plus® Duplex SST, Tungsten Carbide, PTFE
* For most commonly used coatings, the flow meter reading will be accurate to within +/- 0.25%. Accuracy will diminish at low viscosities and low flow rates.