Graco Inc.

ProDispense-System  Elektronisches Voreingestelltes Dispensiersystem

Präzises und schnelles Dispensieren von voreingestellten Mengen von Öl, Schmiermittel und Wasser

HändlersucheInformationen anfordern

ProDispense füllt Hohlräume mit Öl, Schmiermittel oder Wasser in Fließbandumgebungen, bei denen ein präzises Dispensieren notwendig ist. ProDispense kann bis zu drei verschiedene Materialien an verschiedene Dispensierpunkte liefern und den Durchfluss mit den Messgeräten genau messen.

  • 250 Rezepturen
  • Berichterstattungsfunktion zur Überwachung von Volumen und Verbrauch
  • Dank seiner Rentabilität macht sich ProDispense schnell bezahlt
  • Einfache Bedienung
  • Manuelles oder automatisches Dispensieren

ProDispense
Power Requirements
Electrical
115/230 VAC, 1.6 amp maximum, 50 or 60 Hz
115/230 VAC, 1.6 amp maximum, 50 or 60 Hz
Pneumatic (Model 244601 only)
85-120 psi at 1/4 cfm maximum (filtered to 10 micron)
0.59-0.9 MPa, 5.9-9 bar at 1/4 cfm maximum
Number of fluids
1-3 valves
Totalizers
Last dispense, Resettable, Grand
No. of Recipes
250 maximum
Cable Lengths
Meter Signal
50 ft.
15.24 m
Solenoid signal
50 ft.
15.24 m
Operator Station
10 ft., 20 ft. available
3.05 m, 6.10 m available
Fluid Panels
244599 Oil /Lubricant
Flow rate
0.25-4 gpm
0.95-15 lpm
Viscosity range
10 wt. oil - #2 grease
10 wt. oil - #2 grease
Accuracy
+ 1/2% on dispenses over one gallon
+ 1/2% on dispenses over one gallon
Resolution
4.73 cc/pulse
4.73 cc/pulse
Maximum Working Pressure
1500 psi
10 MPa, 103 bar
Fluid inlet
1/2 npt(f)
1/2 npt(f)
Fluid outlet
1/2 npt(f)
1/2 npt(f)
244600 Water/Antifreeze (not ETL listed)
Flow rate
0.25-4 gpm
0.95-15 lpm
Viscosity range
1-20 cps
1-20 cps
Accuracy
+ 3% on dispenses over one gallon
+ 3% on dispenses over one gallon
Resolution
25 cc/pulse
25 cc/pulse
Maximum Working Pressure
250 psi
1.7 MPa, 17 bar
Fluid inlet
1/2 npt(f)
1/2 npt(f)
Fluid outlet
1/2 npt(f)
1/2 npt(f)
244601 Grease/Paint
Flow rate
0.2-1 gpm
0.76-3.8 lpm
Viscosity range
20-5000 cps
20-5000 cps
Accuracy
+ 3% on dispenses over 12 cc
+ 3% on dispenses over 12 cc
Resolution
0.119 cc/pulse
0.119 cc/pulse
Maximum Working Pressure
3000 psi
21 MPa, 207 bar
Maximum Air Pressure
120 psi
0.8 MPa, 8 bar
Fluid inlet
1/4 npt(f)
1/4 npt(f)
Fluid outlet
3/8 npt(m)
3/8 npt(m)
Air Inlet
1/4 npt(f)
1/4 npt(f)
246837 Grease/Paint
Flow rate
.01-.5 gpm
.038-1.9 lpm
Viscosity range
20-3000 cps
20-3000 cps
Accuracy
+ 1.5% on dispenses over 12 cc
+ 1.5% on dispenses over 12 cc
Resolution
.061 cc/pulse
.061 cc/pulse
Maximum Working Pressure
3000 psi
21 MPa, 207 bar
Maximum Air Pressure
120 psi
0.8 MPa, 8 bar
Fluid inlet
1/4 npt(f)
1/4 npt(f)
Fluid outlet
3/8 npt(f)
3/8 npt(f)
Air Inlet
1/4 npt(f)
1/4 npt(f)
246838 Meter-less (flow meter supplied by user)
Flow rate
(TBD) User supplied
(TBD) User supplied
Viscosity range
(TBD) User supplied
(TBD) User supplied
Accuracy
(TBD) User supplied
(TBD) User supplied
Resolution
(TBD) User supplied
(TBD) User supplied
Maximum Working Pressure
3000 psi
21 MPa, 207bar
Maximum Air Pressure
120 psi
0.8 MPa, 8 bar
Fluid inlet
(TBD) User supplied
(TBD) User supplied
Fluid outlet
1/4 npt(f)
1/4 npt(f)
Air Inlet
1/4 npt(f)
1/4 npt(f)
246839 Grease/Paint/Sealants
Flow rate
.013-6 gpm
.05-22 lpm
Viscosity range
30-1,000,000 cps
30-1,000,000 cps
Accuracy
+ 5% on dispenses over 12 cc
+ 5% on dispenses over 12 cc
Resolution
0.286 cc/pulse
0.286 cc/pulse
Maximum Working Pressure
3000 psi
21 MPa, 207 bar
Maximum Air Pressure
120 psi
0.8 MPa, 8 bar
Fluid inlet
3/4 npt(f)
3/4 npt(f)
Fluid outlet
3/8 npt(m)
3/8 npt(m)
Air Inlet
1/4 npt(f)
1/4 npt(f)