Graco Inc.

Flow Meters  For Proportioning Equipment

A wide variety of gear and mass flow meters for finishing applications

ForhandlereBed om oplysninger
Del |

Graco's gear and mass flow meters are highly accurate, even with low flow rates. Our meters are ideal for finishing applications using most solventborne and waterborne paints and resins.

G250/G250 HR, G3000/G3000 HR and S3000

  • Positive displacement, spur gear flow meter
  • Designed for non-abrasive and unfilled materials
  • Highly accurate, even with low flow rates
  • Stainless steel compatible to handle low to medium viscosity materials
  • ETL us, ATEX- and CE-marked

HG6000/HG6000 HR 

  • Positive displacement, helical gear flow meter
  • Designed for higher flow rates and higher viscosity materials
  • Highly accurate, even with low flow rates
  • Stainless steel, water-base compatible for medium to high viscosity materials
  • ATEX- and CE-marked

Coriolis Mass Flow 

  • Non-intrusive mass flow meter
  • Designed for all abrasive and filled materials
  • Stainless steel, waterborne and acid compatible for a wide range of materials
  • Uses less material to flush
  • Wide range of flow rates and material
  • FM-, CSA- and ATEX- and CE-marked
  • 1/4 in and 3/8 in ID options


Precision Pulse Volumetric Fluid Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
Models PPM 3050, 3100, 3550
2000 psi
140 bar
Models PPM 3050H, 3100H, 3550H
3000 psi
210 bar
Flow Range
Models PPM 3050/3050H
0.01–0.5 gal/min
38–1900 cc/min
Models PPM 3100/3100H
0.02–1.0 gal/min
75–3800 cc/min
Models PPM 3550/3550H
0.1–5.5 gal/min
380–21,000 cc/min
Flow Meter Connector Size
Models PPM 3050, 3100, 3550
1/4 bsp(m) x 1/4 npt(f)
1/4 bsp(m) x 1/4 npt(f)
Models PPM 3050H, 3100H, 3550H
M12 x 1.5(m) x 1/4 npt(f)
M12 x 1.5(m) x 1/4 npt(f)
Flow Meter Inlet/Outlet Size without Connector
Models PPM 3050, 3100, 3550
1/4 bsp(m)
1/4 bsp(m)
Models PPM 3050H, 3100H, 3550H
M12 x 1.5(m)
M12 x 1.5(m)
Maximum Fluid Temperature
Models PPM 3050, 3100, 3550
180°F
80° C
Models PPM 3050H, 3100H, 3550H
250°F
120° C
Maximum Ambient Temperature
113°F
45° C
Fluid Viscosity Range
15,000 cps
15,000 cps
Maximum Cable Length
200 ft
61 m
Wetted Parts
303 & 321 Stainless Steel, Tungsten Carbide, PTFE
303 & 321 Stainless Steel, Tungsten Carbide, PTFE

PRO Pulse Electronic Volumetric Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
2800 psi
19.6 MPa, 196 bar
Maximum Working Air Pressure
50 psi
350 kPa, 3.5 bar
Fluid Pressure Operating Range
0–2800 psi
0–19.6 MPa, 0–196 bar
Air Pressure Operating Range
20–50 psi
140–350 kPa, 1.4–3.5 bar
Air Inlet
1/4 inch OD tube
1/4 inch OD tube
Maximum Fiber Optic Cable Length
100 ft with two splices
30.5 m with two splices
Wetted Parts
Stainless Steel, PTFE
Stainless Steel, PTFE

Piston Fluid Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
3000 psi
21 MPa,
Flow Range
0.01–2.6 gal/min
40–10,000 cc/min
Fluid Temperature Range
40–180 F
4–80 C
Maximum Ambient Temperature
180 F
80 C
Fluid Viscosity Range
0.3–20 cps
0.3–20 cps
Maximum Cable Length
200 ft
61 m
Flow Meter Inlet/Outlet
3/8 npt(f)
3/8 npt(f)
Resolution
≈ 0.105 χχ/πυλσε
≈ 0.105 χχ/πυλσε
Accuracy
+ 0.5 %*
+ 0.5 %*
Supply Voltage
4.5–15 Vdc
4.5–15 Vdc
Intrinsic Safety
Class 1; Div. 1; Group D
Class 1; Div. 1; Group D
V max.= 15 V
I max. = 15 mA
Ci = 0.2 ⃞f
Li = 0mH
Approvals
See instruction manual front cover
See instruction manual front cover
Wetted Parts
303 and 440C Stainless Steel, PTFE
303 and 440C Stainless Steel, PTFE
Viton is a registered trademark of the DuPont Company. * For most commonly used coatings, the flow meter reading will be accurate to within + 0.5%. Accuracy will diminish at low viscosities and low flow rates

Coriolis Fluid Flow Meter
U.S.
Metric
Maximum Working Fluid Pressure
Model 116158: 5000 psi (34 MPa, 345 bar) Model 15D135: 2300 psi (16 MPa, 160 bar)
Model 116158: 5000 psi (34 MPa, 345 bar) Model 15D135: 2300 psi (16 MPa, 160 bar)
Flow Range
0.01–0.5 gpm (40–2,000 cc/min)
0.01–0.5 gpm (40–2,000 cc/min)
Fluid Temperature
40–180 F
4–80 C
Maximum Ambient Temperature
180 F
80 C
Fluid Viscosity Range
0.8–2000 cps
0.8–2000 cps
Maximum Cable
200 ft
61 m
Flow Meter Inlet/Outlet
1/4 npt(f)
1/4 npt(f)
Resolution
≈ 0.119 χχ/πυλσε
≈ 0.119 χχ/πυλσε
Accuracy
+ 0.5 %*
+ 0.5 %*
Supply Voltage
24 Vdc
24 Vdc
Wetted Parts
303 and 440C Stainless Steel, PTFE
303 and 440C Stainless Steel, PTFE
* For most commonly used coatings, the flow meter reading will be accurate to within + 0.5%. Accuracy will diminish at low viscosities and low flow rates.



Helical Gear Fluid Flow Meters
U.S.
Metric
Maximum Working Fluid Pressure
6000 psi
41 MPa, 410 bar
Flow Range
Models 246190, 246340, 280560, 15V820, and 24R174: 0.05 to 6.0 gpm (190 to 22,712 cc/min): Models 246652 and 24P688: 0.05 to 2.0 gpm (190 to 7571 cc/min.)
Models 246190, 246340, 280560, 15V820, and 24R174: 0.05 to 6.0 gpm (190 to 22,712 cc/min): Models 246652 and 24P688: 0.05 to 2.0 gpm (190 to 7571 cc/min.)
Maximum Operating Temperature
Models 246190, 246652, and 24P688: 180° F (82° C) Models 280560 and 15V820: 140° F (60° C) Models 246340 and 24R174: 400° F (204° C)
Models 246190, 246652, and 24P688: 180° F (82° C) Models 280560 and 15V820: 140° F (60° C) Models 246340 and 24R174: 400° F (204° C)
Maximum Ambient Temperature
Models 246190, 246652, 246340, 24P688, and 24R174: 180° F (80° C) Models 280560 and 15V820: 140° F (60° C)
Models 246190, 246652, 246340, 24P688, and 24R174: 180° F (80° C) Models 280560 and 15V820: 140° F (60° C)
Fluid Viscosity Range
30 - 1,000,000 cps
30 - 1,000,000 cps
Maximum Cable Length
200 ft
61 m
Flow Meter Inlet/Outlet
3/4 npt(f)
3/4 npt(f)
Resolution (K-Factor)
Models 246190, 246340, 280560, 15V820, and 24R174 - (0.286 cc/pulse) (3500 pulses/liter) Models 246652 and 24P688 - (0.143 cc/pulse) (7000 pulses/liter)
Models 246190, 246340, 280560, 15V820, and 24R174 - (0.286 cc/pulse) (3500 pulses/liter) Models 246652 and 24P688 - (0.143 cc/pulse) (7000 pulses/liter)
Accuracy
+/- 0.25%*
+/- 0.25%*
Repeatability
+/- 0.1%
+/- 0.1%
Supply Voltage
10 - 30 Vdc
10 - 30 Vdc
Typical Current
15 mA
15 mA
Approvals
CE: Models 246190, 246652, 246340, 280560, 24P688, and 24R174 EX: Model 15V820 only
CE: Models 246190, 246652, 246340, 280560, 24P688, and 24R174 EX: Model 15V820 only
Wetted Parts
303 Stainless Steel, 440 SST, Carpenter Technology 7-mo Plus® Duplex SST, Tungsten Carbide, PTFE
303 Stainless Steel, 440 SST, Carpenter Technology 7-mo Plus® Duplex SST, Tungsten Carbide, PTFE
* For most commonly used coatings, the flow meter reading will be accurate to within +/- 0.25%. Accuracy will diminish at low viscosities and low flow rates.