Graco Inc.

M2K-doseringsenhed  Mekanisk standarddoseringsenhed

"Ideel til to-komponent epoxy med lav volumen samt polyuretan- og polyestermaterialer"

ForhandlereBed om oplysninger
Del |

Med Gracos nye M2K-doseringssystem,som har et  brugervenligt og kompakt design, slipper du for manuel blanding. Denne maskine med fast blandingsforhold sørger for,at dit blandingsforhold forbliver det samme, og minimerer gennemskylningstid, materialespild og den rengøring, der ofte er forbundet med manuel blanding. Derudover er der en version, som er specialdesignet til håndtering af split batch-polyestermaterialer.

  • Øger materialets blandingsnøjagtighed for at forbedre overfladekvalitet og reducere materialespild i forhold til manuel blanding
  • Den kompakte størrelse gør det hurtigere og nemmere at gennemskylle, så du sparer tid og penge
  • Ideel til to-komponent epoxy med lav volumen samt polyuretan- og polyestermaterialer
  • Dokumenteret driftssikkerhed for de primære komponenter, inklusive vores Merkur-luftmotor
  • Vælg mellem luftsprøjte-, air-assist- og airless-påføringsteknologier

M2K Spray Packages
U.S.
Metric
Maximum fluid working pressure
Refer to Technical Data Matrix, instruction manual
Refer to Technical Data Matrix, instruction manual
Maximum flow rate
Refer to Technical Data Matrix, instruction manual
Refer to Technical Data Matrix, instruction manual
Maximum pump air pressure
Refer to Technical Data Matrix, instruction manual
Refer to Technical Data Matrix, instruction manual
Maximum spray gun pressure
See your gun manual for spray gun pressures.
See your gun manual for spray gun pressures.
Pump air consumption (See gun manual for additional air consumption)
Refer to Performance Charts, instruction manual
Refer to Performance Charts, instruction manual
Maximum free-flow delivery <b >*NOTE: M2K proportioners are rated to 20 cycles per minute related flowrate to prevent cavitation and ensure complete pump loading, necessary to maintain ratio accuracy.
Recommended cycle rate for continuous duty
20 cycles per minute
20 cycles per minute
Maximum viscosity
10,000 cps
10,000 cps
Ambient air temperature range
35°–120°F
2°–49°C
Maximum fluid temperature
160°F
71°C
Fluid flow per cycle
Refer to Technical Data Matrix, in instruction manual
Refer to Technical Data Matrix, in instruction manual
Noise (dBa)
Maximum sound pressure
See Technical Data in air motor manual 312796.
See Technical Data in air motor manual 312796.
Inlet/Outlet Sizes
Air inlet size
1/4 in. npt(f)
1/4 in. npt(f)
Materials of Construction**
Wetted materials on all models
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE, PEEK Spray gun: See Manual 312414 (Air Spray guns). 3A0149 (AA guns), or Manual 312145 (XTR guns). Fluid hoses: nylon 303/304 SST Suction assembly: stainless steel, nylon Relief valve, 304 SST, graphite-filled PTFE, tungsten carbide with nickel binder Fluid filter: See manual 307273. Drain valve: stainless steel, nylon
Displacement pump: Stainless steel, tungsten carbide with 6% nickel, UHMWPE, PTFE, PEEK Spray gun: See Manual 312414 (Air Spray guns). 3A0149 (AA guns), or Manual 312145 (XTR guns). Fluid hoses: nylon 303/304 SST Suction assembly: stainless steel, nylon Relief valve, 304 SST, graphite-filled PTFE, tungsten carbide with nickel binder Fluid filter: See manual 307273. Drain valve: stainless steel, nylon
Weight:
All models
Refer to Technical Data Matrix, in instruction manual
Refer to Technical Data Matrix, in instruction manual