Graco Inc.

Pro Xp Auto Waterborne Electrostatic Spray Guns  Automatic Electrostatic Guns for Waterborne Applications

Ideal for high quality spraying of low or high pressure applications

ForhandlereBed om oplysninger
Del |

Ideal for spraying waterborne materials with isolation systems, the Pro Xp waterborne gun is available in air spray and air-assist models.

Pro Xp Air Spray: For low pressure spraying with an isolation system including the WB100.

Pro Xp Air-Assist: For high pressure spraying with an isolation system including the WB3000. Delivers a fine finish with an AEF or AEM tip.

Pro Xp Auto Control Module

Pro Xp Control Module

The Pro Xp Auto smart gun models connect right to the control module so you can see exactly how your gun is performing 24/7. With our control module, you can easily change the kV setting to optimize spray parameters for less touch up and a better finish quality on your parts.

Electrostic gun do not include a control module or fiber optic cable. Order items separately.

Pro Xp Auto Waterborne
  • Versatile product line gives you more models to choose from and greater spraying flexibility
  • Manifold style fits almost any systems requirement - back manifold is ideal for a variety of systems 
  • 60 kV power supply and internal power so there’s no electrical cord to worry about damaging or replacing
  • Higher transfer efficiency equals less waste, saving you money on material
  • Made in the USA
  • Durable components reduce cost of ownership, supported by a three year warranty

Pro Xp Auto Waterborne Air Spray Gun
Maximum fluid working pressure
100 psi
0.7 MPa, 7 bar
Maximum working air pressure
100 psi
0.7 MPa, 7 bar
Maximum air pressure at gun inlet
40 psi
0.28 MPa, 2.8 bar
Maximum fluid operating temperature
120°F
48°C
Paint resistivity range
3 megohm/cm to infinity
3 megohm/cm to infinity
Short circuit current output
125 microamperes
125 microamperes
Gun Weight (Approximate)
2.6 lb
1.2 kg
Voltage Output
Standard Models
60 kV
60 kV
Smart Models
30-60 kV
30-60 kV
Noise (dBa)
Sound Power (measured per ISO Standard 9216)
at 40 psi: 90.4 dB(A)at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A)at 0.7 MPa, 7 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87 dB(A)at 100 psi: 99 dB(A)
at 0.28 MPa, 2.8 bar: 87 dB(A)at 0.7 MPa, 7 bar: 99 dB(A)
Inlet/Outlet Sizes
Turbine air inlet fitting, left-hand thread
1/4 npsm(m)
1/4 npsm(m)
Atomizing air inlet fitting
5/16 in. OD nylon tube (8 mm)
5/16 in. OD nylon tube (8 mm)
Fan air inlet fitting
5/16 in. OD nylon tube (8 mm)
5/16 in. OD nylon tube (8 mm)
Cylinder air inlet fitting
5/32 in. OD nylon tube (4 mm)
5/32 in. OD nylon tube (4 mm)
Fluid inlet fitting
1/4-18 npsm(m)
1/4-18 npsm(m)
Materials of Construction
Wetted Parts
Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene
Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene