Graco Inc.

Husky 2150 Air-Operated Double Diaphragm Pumps  2 inch Positive Displacement Double Diaphragm Pump

AODD pumps with a 2 inch (50.8 mm) connection available in polypropylene, aluminum, SST and iron

مكان الشراءطلب معلومات

Our Husky 2-inch pneumatic double diaphragm pumps offer larger ports for increased flow, along with a patented, high-reliability closed center air valve that is online serviceable.

  • 2 in (51 mm) ANSI end-porting
  • Fluid flow up to 150 gpm (568 lpm)
  • Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
  • Lube-free operation
  • Epoxy-coated air section for tough environmental conditions
  • Available in aluminum, 316 stainless steel, ductile iron and polypropylene

Husky 2150 Air-Operated Diaphragm Pump
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20-120 psi
1.4-8 bar, 0.14-0.8 MPa
Maximum air consumption
175 scfm (see instruction manual chart)
175 scfm (see instruction manual chart)
Air consumption at 70 psi (0.48 MPa, 4.8 bar)/60 gpm
60 scfm (see instruction manual chart)
60 scfm (see instruction manual chart)
Maximum free-flow delivery
150 gpm
568 lpm
Maximum pump speed
145 cpm
145 cpm
Gallons (liters) per cycle
1.03 gal
3.90 l
Maximum suction lift
18 ft wet or dry
5.48 m wet or dry
Maximum size pumpable solids
1/4 in
6.3 mm
Maximum noise level* at 100 psi (7.0 bar, 0.7 MPa) and 50 cpm
90 dBa
90 dBa
Sound power level, sound power measured per ISO Standard 9216.
103 dBa
103 dBa
Noise level at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm, noise levels measured with the pump mounted on the floor using Rubber Foot Kit 236452.
85 dBa
85 dBa
Maximum Operating Temperature
Models with PTFE diaphragms
200°F
93.3°C
Models with other diaphragms
150°F
65.5°C
Air inlet size
1/2 npt(f)
1/2 npt(f)
Fluid inlet size
2 in npt(f)
2 in npt(f)
Fluid outlet size
2 in npt(f)
2 in npt(f)
Wetted parts vary by model. See manual.
Non-wetted external parts
Aluminum, 302 and 316 stainless steel, polyester (labels)
Aluminum, 302 and 316 stainless steel, polyester (labels)
Weight
Aluminum pumps
58 lb
26.3 kg
Stainless steel pumps with aluminum center section
111 lb
50.3 kg
Ductile iron pumps with stainless steel center section
130 lb
59.0 kg
Stainless steel pumps with stainless steel center section
134 lb
61.0 kg

Husky 2150 Air-Operated Diaphragm Pump
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20-120 psi
1.4-8 bar, 0.14-0.8 MPa,
Maximum air consumption
175 scfm
5 m³/min
Air consumption
60 scfm at 70 psi, 60 gpm
1.7 m³/min at 4.8 bar, 0.48 MPa, 227 lpm
Maximum free-flow delivery
150 gpm
568 lpm
Maximum pump speed
145 cpm
145 cpm
Gallons (liters) per cycle
1.03 gal
3.90 l
Maximum suction lift
18 ft wet or dry
5.48 m wet or dry
Maximum size pumpable solids
1/4 in
6.3 mm
Maximum noise level* at 100 psi (7.0 bar, 0.7 MPa) and 50 cpm
90 dBa
90 dBa
Sound power level*
103 dBa
103 dBa
Noise level* at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm
85 dBa
85 dBa
Maximum Operating Temperature
150°F
65.5°C
Air inlet size
1/2 npt(f)
1/2 npt(f)
Fluid inlet size
2 in Raised Face Flange
2 in Raised Face Flange
Fluid outlet size
2 in Raised Face Flange
2 in Raised Face Flange
Wetted parts vary by model. See manual.
Non-wetted external parts
Aluminum, 302 and 316 stainless steel, polyester (labels)
Aluminum, 302 and 316 stainless steel, polyester (labels)
Weight
Polypropylene pumps with aluminum center section
49 lb
22 kg
PVDF pumps with aluminum center section
68 lb
31 kg
Polypropylene pumps with stainless steel center section
71 lb
32 kg
PVDF pumps with stainless steel center section
90 lb
41 kg
® and Santoprene ® are registered trademarks of the Monsanto Co. Loctite ® is a registered trademark of the Loctite corporation. * Noise levels measured with the pump mounted on the floor using Rubber Foot Kit 236452. Sound power measured per ISO Standard 9216.