Graco Inc.

UniXact Automated Dispensing Solutions 

Precision fluid dispense for the toughest applications

Kust osta

Graco UniXact: THE single-source, turnkey solution - from the global leader in fluid handling

Thermal Paste Dispense

One Solution. UniXact is the ONLY end-to-end automated fluid dispense system - utilizing all Graco products, XYZ motion and Graco proprietary software.

Built to Dispense. UniXact delivers precise automated dispense of many fluid types – specializing in tough-to-handle materials such as thermal interface and 2K.

One Global Partner. UniXact is the ONLY solution with all components developed and supported by ONE worldwide source. With facilities around the globe, Graco provides a personalized partnership experience - including solution planning, implementation guidance and 24/7 in-person support.

Watch UniXact in action and learn about the many dispense configurations.

Graco Automation bead

Graco UniXact solutions are configurable for one and two-component chemistries, with a flexible design to adapt easily as materials and parts change.

Want to learn more about UniXact automation solutions?

V›tke Ÿhendust meie ekspertidega

Graco Valves

  • Precise one and two-component dispensing
  • Reliable, repeatable fluid flow control
  • Simple valve design means easy maintenance
  • Compatible with a variety of materials and viscosities


Motion Platform

  • Four-axis Cartesian robot
  • Overall dimensions -
                    C300 Model                                  C500 Model
                Width:  37 in (939 mm)                  Width:  47 in (1200 mm)
                Height:  75 in (1905 mm)               Height:  79 in (2000 mm)
                Depth:  41 in (1041 mm)                Depth:  47 in (1200 mm)
  •  Work piece area -
                X:  10 in (254 mm)                         X:  20 in (500 mm)
                Y:  10.88 in (277 mm)                    Y:  20 in (500 mm)
                Z:  2.75 in (70 mm)                        Z:  6 in (150 mm)
  • Custom configurations, scalable designs
  • Real-time process monitoring with data download
  • Easy and intuitive on-board operator controls
  • 100 mm/sec dispensing full load, 200 mm/sec point-to-point
  • Repeatability +/- 0.01 mm (.0004 in.)
  • Load carrying capability 15 Kg
  • Proprietary Graco software with easy to use interface
  • Store hundreds of programs onboard
  • DXF download for fast programming
  • Communication port for process data
  • Custom tooling for part location
  • Optional Y slides to increase cycle time

 

 



C-300 and C-500 UniXact Automated Dispense
Air pressure operating range*
80–100 psi
0.6–0.7 MPa, 5.5–7 bar
Maximum air consumption**
0–2 scfm
0.3 m³/minute
Power requirements
100–240 VAC, 50/60 Hz, 4 AMP
100–240 VAC, 50/60 Hz, 4 AMP
Load carrying capacity
33 lb
15 kg
Wetted materials on all models
Refer to the manual for the dispenser.
Refer to the manual for the dispenser.
Inlet/Outlet Sizes
Air inlet size
1/4 in. npt(f)
1/4 in. npt(f)
Air exhaust port size
n/a
n/a
Weight
C-300
570 lb
258.5 kg
C-500
850 lb
385.6 kg
Notes
Sound pressure and displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type.** Depending on options.