Graco Inc.

EcoQuip EQ100m  Mobile Vapor Abrasive Blast Equipment

Compact, portable blast equipment fits in bed of pickup truck.

OstopaikatTietopyyntö
Jaa |
Blasting_graffiti.tif

Compact, fully portable entry-level unit

With its built-in hand truck, slide rails and convenient lifting eye, the patented EQ100m design facilitates easy portability. It fits in the bed of most standard pickup trucks. The EQ100m can accommodate any abrasive heavier than water and, when coupled with an air compressor that can produce 165-375 cfm @ 100+ psi, the EQ100m blasts from 30-120 psi (2-8.3 bar). It’s a tough worker, capable of handling any type of project, from cleaning to surface preparation.

 

About Vapor Abrasive Blasting

  • Generates less dust - 92% less airborne dust than dry blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less water than traditional water-based wet blasting
  • Designed for years of solid service

 

 

 

 

 

 

 

EQ100M
Maximum Working Pressure
125 psi
8.6 bar, 0.86 MPa
Operating Temperature
35° – 110° F
1.6° – 43.3° C
Recommended Compressor
185 – 375 cfm
5.23 – 10.62 m^3/min
Blast Hose Size
1 in. ID
25.4 mm ID
Abrasive Capacity
100 – 250 lb
45 – 114 kg
Dry Weight
360 lb
164 kg
Wet Weight
900 lb
400 kg
Pressure Pot Volume
2.0 cubic feet
57 liters
Water Tank Volume
10 gallon
38 liters
Air Supply Hose Minimum ID
185–600 cfm compressor and less than 100 ft hose length
1.5 in. ID
38 mm ID
Over 600 cfm compressor or greater than 100 ft. hose length
2 in. ID
51 mm ID
Sound Data*
Sound Pressure Level
133 dB(A)
133 dB(A)
Sound Power Level
139 dB(A)
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
131 dB(C)
*All readings were taken at the maximum system blast pressure 125 psi (8.6 bar, 0.86 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614–2.