Graco Inc.

Pro Xp Auto Air Spray Electrostatic Spray Guns  Automatic Electrostatic Air Spray Guns

Ideal for low pressure, high quality spraying. Easy modular installation without the need for electrical connections.

OstopaikatTietopyyntö
Jaa |

Get the spray performance and transfer efficiency of our manual Pro Xp guns in an automatic version. They’re smaller, lighter and designed to maximize your profits. Every automatic Pro Xp gun is tested and delivered with a certificate indicating it meets all of Graco’s requirements for spray pattern, mechanical performance and electrical performance so you know you’re getting a quality product.

Pro Xp Auto Control Module

Pro Xp Control Module

The Pro Xp Auto smart gun models connect right to the control module so you can see exactly how your gun is performing 24/7. With our control module, you can easily change the kV setting to optimize spray parameters for less touch up and a better finish quality on your parts.

Electrostic gun do not include a control module or fiber optic cable. Order items separately.

  • Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
  • Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
  • 85 kV power supply and internal power so there’s no electrical cord to worry about damaging or replacing
  • Higher transfer efficiency equals less waste, saving you money on material
  • Made in the USA
  • Durable components reduce cost of ownership, supported by a three year warranty

Pro Xp Auto Air Electrostatic Spray Gun
Maximum fluid working pressure
100 psi
0.7 MPa, 7 bar
Maximum working air pressure
100 psi
0.7 MPa, 7 bar
Maximum fluid operating temperature
120°F
48°C
Short circuit current output
125 microamperes
125 microamperes
Paint resistivity range
3 megohm/cm to infinity. *For a table of electrostatic results at different resistance levels see, Check Fluid Resistivity, see instruction manual.
3 megohm/cm to infinity. *For a table of electrostatic results at different resistance levels see, Check Fluid Resistivity, see instruction manual.
Gun Weight
2.6 lb
1.2 kg
Voltage Output
Standard Models
85 kV
85 kV
Smart Models
40-85 kV
40-85 kV
Noise (dBa)
Sound Power (measured per ISO 9216 Standard
at 40 psi: 90.4 dB(A) at 100 psi: 105.4 dB(A)
at 0.28 MPa, 2.8 bar: 90.4 dB(A) at 0.7 MPa, 7 bar: 105.4 dB(A)
Sound Pressure (measured 1 m from gun)
at 40 psi: 87 dB(A) at 100 psi: 99 dB(A)
at 0.28 MPa, 2.8 bar: 87 dB(A) at 0.7 MPa, 7 bar: 99 dB(A)
Inlet/Outlet Sizes
Turbine air inlet fitting, left-hand thread
1/4 npsm(m)
1/4 npsm(m)
Atomizing air inlet fitting
5/16 in. OD nylon tube (8 mm)
5/16 in. OD nylon tube (8 mm)
Fan air inlet fitting
5/16 in. OD nylon tube (8 mm)
5/16 in. OD nylon tube (8 mm)
Cylinder air inlet fitting
5/32 in. OD nylon tube (4 mm)
5/32 in. OD nylon tube (4 mm)
Fluid inlet fitting
1/4-18 npsm(m)
1/4-18 npsm(m)
Materials of Construction
Wetted Parts
Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene
Stainless Steel; Nylon, Acetal, Ultra-High Molecular Weight Polyethylene, Fluoroelastomer, PEEK, Tungsten Carbide, Polyethylene