Graco Inc.

Piston Pumps with Sealed Wet Cup  Long-Lasting Piston Pumps with Sealed Wet Cup

Piston pumps with enclosed, dual seal wet cup design with an extended seal life - ideal for the most difficult inks

OstopaikatTietopyyntö
Jaa |

These Graco piston pumps have an enclosed, dual seal wet cup design with an extended seal life - ideal for the most difficult inks. Available with hydraulic or pneumatic motors and an optional runaway control.

  • Prolong seal life with enclosed, dual seal wet cup
  • Runaway control with optional DataTrak
  • MaxLife seal for longer life
  • Handles the most difficult inks
  • Available with hydraulic or pneumatic motors
Näytä arvot SI-järjestelmän yksiköissä. Näytä arvot Yhdysvaltain yksiköissä.

Check-Mate 2100 Pump
Quiet Bulldog Pumps
Ratio
55:1
55:1
Maximum fluid working pressure
4950 psi
34 MPa, 341bar
Maximum air input pressure
90 psi
0.6 MPa, 6.2bar
Pump cycles per 3.8 liters (1 gal.)
40
40
Fluid Flow at 60 cycles/min
1.5 gpm
5.7 liters/min
Air motor piston effective diameter
5.75 in.
146 cm
Stroke length
4.7 in
120 mm
Displacement pump effective area
0.697in.²
4.5 cm²
Maximum pump operating temperature
180°F
82°C
Weight
approx. 100 lb
approx. 45kg
Wetted parts
Carbon Steel; E52100, 41L40, and 4140 Alloy Steel; 304, 316 and 17-4 PH Grades of Stainless Steel; Ductile Iron; Zinc and Nickel Plating; PTFE; Acetal; Ultra-High Molecular Weight Polyethylene (not used on Displacement Pump 235540)
Carbon Steel; E52100, 41L40, and 4140 Alloy Steel; 304, 316 and 17-4 PH Grades of Stainless Steel; Ductile Iron; Zinc and Nickel Plating; PTFE; Acetal; Ultra-High Molecular Weight Polyethylene (not used on Displacement Pump 235540)