Graco Inc.

Módulos Dyna-Star 10:1 y Dyna-Star 5:1  Bombas de lubricación hidráulicas

Funcionamiento de alta presión y larga duración mediante una conexión a circuitos hidráulicos de baja o alta presión

Dónde comprarSolicitar información

La construcción de servicio pesado y el equipo de minería están respaldados por lubricantes frescos para limpiar los contaminantes de los puntos de giro críticos. El sistema automático de lubricación de Graco ofrece un reabastecimiento continuo de lubricante para evitar costosas fallas en los componentes.

Dyna-Star 10 1 & 5 1 features
  • Gran variedad de longitudes de bomba, de 60 libras (27kg), 120 libras (54 kg) y 400 libras (181 kg) y opciones de depósitos de 60 libras (27 kg) y 90 libras (41 kg) para ajustarse a todos sus equipos todo terreno
  • Los kits de bombas preconfiguradas para sistemas basados en válvulas inyectoras o divisoras le brindan una flexibilidad máxima
  • El controlador, indicador de nivel, interruptor de presión, placas y cubiertas del tambor opcionales de Graco le permiten controlar su sistema, sin necesidad de hacer conjeturas
  • Conveniente control de presión y fluido incorporado
  • Módulo de control hidráulico: todos sus controles en un paquete para configurar y mantener el sistema fácilmente

 

5:1 Dynastar Pump Module
Maximum hydraulic input pressure
3500 psi
241 bar, 24 MPa
Pump wetted parts
See manual 308156
See manual 308156
Vent valve wetted parts
See manual 309099
See manual 309099
Reservoir wetted parts
steel, buna–n rubber
steel, buna–n rubber
Maximum delivery
66 oz/min at 3 gpm hydraulic flow rate
119 in³/min, 1952 cm³/min at 3 gpm hydraulic flow rate
Hydraulic pressure operating range
800 to 1200 psi
55 to 83 bar, 5.5 to 8 MPa
Hydraulic flow rate operating range
0.5 to 3.0 gpm
1.9 to 11.4 lpm
Lubricant outlet pressure range
2500 to 3500 psi
172 to 241 bar, 17 to 24 MPa
Reservoir overflow port size
1/2 npt
1/2 npt
Reservoir fill port size
1/2 npt
1/2 npt
Hydraulic inlet port size
3/8 in nps swivel
3/8 in nps swivel
Hydraulic tank line size
3/4 in nps swivel
3/4 in nps swivel
Lubricant outlet port size
1/2 nps swivel
1/2 nps swivel
Grease capacity
90 lb
90 lb
Mounting holes for pump module
Six 7/16 in holes on 13 7/8 in bolt circle
Six 7/16 in holes on 13 7/8 in bolt circle
Reservoir diameter
12 3/4 in
324 mm
Pump module height
37 3/4 in
959 mm
Electrical requirements
Timed 24 VDC signal
Timed 24 VDC signal
Electrical power requirements
14.7 Watts
14.7 Watts
Filtration (hydraulic fluid)
10μ (microns) or better
10μ (microns) or better
Sound pressure (Reading taken with pump operating at 66 cycles per minute. Measured per CAGI–PNEUROP, 1971)
77 dB (A)
77 dB (A)

10:1 Dyna-Star Pump Module
Maximum hydraulic input pressure
3500 psi
240 bar, 24.0 MPa
Pump wetted parts
See manual 312350
See manual 312350
Vent valve wetted parts
See manual 309099
See manual 309099
Reservoir wetted parts
Steel, buna-n rubber
Steel, buna-n rubber
Maximum delivery @ 60 cpm
1.1 lb/min, 34.8 in³/min
570 cm³/min
Regulated hydraulic pressure operating range
Models: 247444, 247574, 247456, 247457, 247970: 250 to 350 psi, Models: 247706, 247707: 250 to 450 psi
Models: 247444, 247574, 247456, 247457, 247970: 1.7 to 2.4 MPa, 17.0 to 24.1 bar, Models: 247706, 247707: 1.7 to 3.1 MPa, 17.0 to 31.0 bar
Hydraulic flow rate operating range
0.5 to 3.0 gpm
1.9 to 11.4 lpm
Maximum hydraulic fluid temperature
200°F
93.33°C
Lubricant outlet pressure range
Models: 247444, 247574, 247456, 247457, 247970: 2500 to 3500 psi, Models: 247706, 247707: 2500 to 4500 psi
Models: 247444, 247574, 247456, 247457, 247970: 17.0 to 24.0 MPa, 170 to 240 bar, Models: 247706, 247707: 17.0 to 31.0 MPa, 170 to 310 bar
Reservoir overflow port size
1/2 in npt
1/2 in npt
Reservoir fill port size
1/2 in npt
1/2 in npt
Hydraulic inlet port size
3/8 in nps swivel
3/8 in nps swivel
Hydraulic tank line size
3/4 in nps swivel
3/4 in nps swivel
Lubricant outlet port size
1/2 in nps swivel
1/2 in nps swivel
Grease capacity
Model 247444, 247707: 90 lb, Model 247574, 247706: 60 lb
Model 247444, 247707: 41 kg, Model 247574, 247706: 27 kg
Mounting holes for pump module
six, 7/16 in holes on 13 7/8 in bolt circle
six, 7/16 in holes on 13 7/8 in bolt circle
Reservoir diameter
12 3/4 in
324 mm
Pump module height
Model 247444, 247707: 42.75 in, Model 247574, 247706: 35.15 in
Model 247444, 247707: 1086 mm, Model 247574, 247706: 893 mm
Electrical requirements
Timed 24 VDC signal
Timed 24 VDC signal
Electrical power requirements
14.7 Watts
14.7 Watts
Filtration (hydraulic fluid)
10μ (microns) or better
10μ (microns) or better
Sound Pressure (reading taken with pump operating at 66 cycles per minute. Sound pressure measured per CAGI-PNEUROP, 1971)
77 dB(A)
77 dB(A)