Graco Inc.

Gun Splitter  Quick-flush feature saves time and material

Lets you use two spray guns with one XP Sprayer

Σημεία πώλησης

The Graco Gun Splitter lets you use two spray guns with one XP Plural-Component Sprayer. In addition, you can independently clean and flush one gun, while the other gun remains in use. If you’re using a higher production XP machine such as the XP50 or XP70, the Gun Splitter helps you become even more productive.

  • Independently sprays or flushes two guns for faster-setting materials
  • Saves time, improves uptime
  • Less solvent waste
  • Designed with minimal dead space, greatly reducing material build-up inside the splitter

Εγχειρίδια

Gun Splitter Valve
Maximum fluid working pressure
Mixed paint
7250 psi
50 MPa, 500 bar
Flush solvent
5000 psi
35 MPa, 345 bar
Paint wetted materials
Manifold and valve housings
Nickel plated steel
Nickel plated steel
Seats
Carbide
Carbide
Valve stems
17-4 and 440c stainless
17-4 and 440c stainless
Seals
PTFE, UHMWPE
PTFE, UHMWPE
Solvent flush wetted materials
Check valve and fittings
Zinc plated steel
Zinc plated steel
Ball
Chrome alloy
Chrome alloy
Gasket
Aluminum
Aluminum
Connections
Mixed paint inlet
1/2 in. npt(f) port with 3/8 npt(m) inlet
1/2 in. npt(f) port with 3/8 npt(m) inlet
Flush solvent inlet
1/4 in. npt(m) nipple
1/4 in. npt(m) nipple
Gun 1 and Gun 2 outlets
3/8 npt nipples in 3/8 npt(f) ports
3/8 npt nipples in 3/8 npt(f) ports
Optional Gun 3 straight through outlet
3/8 npt(f) plugged port
3/8 npt(f) plugged port
Weight
Gun splitter valve with carriage
10.2 lbs
4.6 kg
Carriage Dimensions
Height
8 in.
20.3 cm
Width
6.25 in.
15.87 cm
Length
9.26 in.
23.52 cm