Graco Inc.

GX-8  Plural-Component Spray Guns

For very low-output fast-set polyurea, polyurethane and hybrid coatings

Σημεία πώλησηςΑίτημα πληροφοριών

The GX-8 Gun is designed for very low output, fast-set polyurea, polyurethane and hybrid coatings. It is designed to save on material consumption by significantly reducing overspray associated with low-output spraying.

  • Solvent-free, mechanically self-cleaning
  • Direct impingement mixing assures high yield per unit of material and superior surface finish
  • More air volume to air cap helps keep the gun's tip cleaner longer

GX-8P Spray Gun
Air Supply
100-125 psi
7-9 bar
Maximum Operating Pressure
3500 psi
24 MPa, 240 bar
Maximum Output ❄
0.4 gallons/min.
1.52 liters/min.
Minimum Output ❄
0.1 gallons/min.
0.38 liters/min.
Maximum Sound Pressure*†
78.7 db(A) 100 psi (0.7 MPa, 7 bar)
78.7 db(A) 100 psi (0.7 MPa, 7 bar)
Maximum Sound Power**†
85.7 db(A) 100 psi (0.7 MPa, 7 bar
85.7 db(A) 100 psi (0.7 MPa, 7 bar
Height
7 in.
17.8 cm
Length
7.5 in.
19 cm
Width
2.5 in.
6.25 cm
Weight
3.5 lbs.
1.59 kg
Mixing
Internal impingement, airless atomization, solvent-free, mechanically self cleaning
Internal impingement, airless atomization, solvent-free, mechanically self cleaning
Wetted Parts
Stainless Steel, Carbon Steel, HDPE, Acetal
Stainless Steel, Carbon Steel, HDPE, Acetal
❄ Theoretical: actual results will vary with operating conditions.† Measured at typical operating conditions (clean-off valve on gun is a half turn open). * Sound pressure measured 3 feet (1 meter) from equipment. ** Sound power measured per ISO-9416-2.