Graco Inc.

Husky Twistork Agitator  Fluid transfer package mixes most paints, resins, urethanes, epoxies and latex materials up to 1000 cps

Gentle whipfree mixing action reduces degradation and splashing

Αίτημα πληροφοριών

This closed system prevents evaporation, reducing VOC emissions. This helps maintain the purity of the material in the drum - simplifying drum agitation, plus improving efficiency and quality.

  • Reduce volatile fluid evaporation while maintaining the purity of sealed drum contents
  • Available with acetal or polypropylene Husky 515 diaphragm pump
  • Quiet, versatile pump connected to agitator lifts solids from bottom of tank and mixes while maintaining suspension
  • Mix paint, resins, urethanesm epoxies and latex materials up to 1000 cps


Husky Twistork Agitator
Maximum air input pressure
100 psi
7 bar, 0.7 MPa
Maximum fluid output pressure
100 psi
7 bar, 0.7 MPa
Air inlet
Quick-coupler, nipple (pin)
Quick-coupler, nipple (pin)
Fluid outlet size
3/4 npt(f)
3/4 npt(f)
Maximum recommended agitator speed
800 rpm
800 rpm
Pump air consumption at 12 gpm (45.4 lpm)
approximately 12 scfm
approximately 0.34 m³ /min
Maximum operating temperature
150°F
66°C
Weight
32 lb
(14.5 kg)
Maximum noise level (tested to CAGI-PNEUROP--1969)
85 dB(A)
Maximum siphon flow rate
with 100 cps material
12 gpm
45.4 lpm
with 1000 cps material
1.2 gpm
4.54 lpm
Agitator air consumption
at 400 rpm
2.5 scfm
0.07 m³ /min
at 800 rpm
5.7 scfm
0.16 m³ /min
Weight
Aluminum pumps
58 lb
26.3 kg
Stainless steel pumps with aluminum center section
111 lb
50.3 kg
Ductile iron pumps with stainless steel center section
130 lb
59.0 kg
Stainless steel pumps with stainless steel center section
134 lb
61.0 kg