Graco Inc.

SaniForce 3150 BES  Sanitary Bin Evacuation System

Equipped with two pumps and flow rates up to 300 gpm (1,135 lpm), Graco's 3150 BES pump can move materials up to 100,000 cps

Σημεία πώλησηςΑίτημα πληροφοριών

The SaniForce 3150 Bin Evacuation System (BES) evacuates viscous products from their original 300-gallon containers without dilutioning the material.  Standard with an inflatable ram plate seal, the BES allows a quick replacement of the empty container. A pneumatic version is available for applications that do not require metering or batch control and an electronic version is available for those applications that do.

SaniForce 3150 BES

  • Equipped with two pumps and flow rates up to 300 gpm (1,135 lpm)
  • Maximum fluid pressure of 120 psi (8.4 bar, 0.84 MPa)
  • Eliminates the need for booster pumps
  • Evacuation times of 5 minutes or less for most materials
  • Available with pneumatic or electronic controls
  • Evacuate viscous products, up to 100,000 cps, from 300 gallon (1,135 l) “bag-in-bin” containers without dilution
  • Suitable to pump products such as: tomato paste, light peanut butter, icing, frosting, jams and jellies, toothpaste and heavier ointments

SaniForce BES 300

Inflatable Wiper Seal:

  • Inflatable wiper creates a tight seal preventing contaminants from entering the container
  • Increased efficiency and faster change-out of bins with the inflatable wiper seal
  • Unique floating ram plate eliminates the need for exact positioning of bin under the ram plate

Άλλοι πόροι

SaniForce Bin Evacuation Systems, BES3xx and BES4xx
Maximum Working Fluid Pressure
120 psi
8.4 bar, 0.84 MPa
Compressed air requirement
80–120 psi
5.5–8.4 bar, 0.55–0.84 MPa
Fluid displacement (each pump)
1.03 gal/cycle
3.9 l/cycle
Flow rate @ 60 cpm
120 gpm
454 lpm
Pressure ratio
1:1
1:1
Air consumption (each pump)
0.8 scfm per gpm @ 70 psi
0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pump outlet
3 in tri-clamp
3 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Pneumatic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1/2 in npt(f)
1/2 in npt(f)
Electronic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required
SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx
Compressed air requirement
80–100 psi
5.5–7 bar, 0.55–0.7 MPa
Pump outlet
2 in tri-clamp
2 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Maximum Working Fluid Pressure
BESAxx and BESBxx
410 psi
28.3 bar, 2.8 MPa
BESExx and BESFxx
1450 psi
100.4 bar, 10.1 MPa
Fluid displacement (each pump)
BESAxx and BESBxx
0.23 gal/cycle
0.87 l/cycle
BESExx and BESFxx
0.14 gal/cycle
0.53 l/cycle
Flow rate @ 60 cpm
BESAxx
27.6 gpm
104.5 lpm
BESBxx
54 gpm
204.4 lpm
BESExx
17 gpm
64.3 lpm
BESFxx
34 gpm
128.7 lpm
Pressure ratio
BESAxx and BESBxx
4.3:1
4.3:1
BESExx and BESFxx
10:1
10:1
Air consumption (each pump)
BESAxx and BESBxx
1.8 scfm per gpm @ 70 psi
0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa
BESExx and BESFxx
3.5 scfm per gpm @ 70 psi
0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pneumatic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1 in npt(f)
1 in npt(f)
Electronic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required