SoloTech 10 Peristaltic Hose Pump Peristaltic Hose Pumps for Industrial Metering and Transfer
10 mm hose size. Maximum flow rate of 0.685 gpm (2.6 lpm) at 92 rpm.
Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.
- More flow per revolution than conventional designs
- Inexpensive to maintain - no valves, seals or glands
- Pumps are reversible and can be used to empty lines or clear blockages
- Extended hose life - only one hose compression per revolution
Priručnici
Literatura
Drugi resursi
- CAD Drawing (2D) - SoloTech 10 A/C (Samo engleski)
- CAD Drawing (3D) - SoloTech 10 A/C (Samo engleski)
- CAD Drawing (2D) - SoloTech 10 D/C (Samo engleski)
- CAD Drawing (3D) - SoloTech 10 D/C (Samo engleski)
- CAD SoloTech 10 IEC Flange Gearbox Only (Samo engleski)
- CAD SoloTech 10 NEMA Flange Gearbox Only (Samo engleski)
SoloTech Peristaltic Pumps | |
Maximum Fluid Working Pressure | 125 psi 0.9 MPa, 9 bar |
Motor Horsepower/Gear Ratio | See the identification tag on your gear motor. See the identification tag on your gear motor. |
Maximum Pump Speed | 90 RPM 90 RPM |
Environmental Temperature Range (Do not allow material to freeze in the pump.) | 14°F to 104°F –10°C to 40°C |
Maximum Flow | |
ST10 | 0.67 gpm 2.5 lpm |
ST23 | 4.5 gpm 17.0 lpm |
ST26 | 9.8 gpm 37.1 lpm |
ST30 | 15.8 gpm 59.8 lpm |
Fluid Capacity per Revolution | |
ST10 | 0.007 gal. 0.03 l |
ST23 | 0.054 gal. 0.20 l |
ST26 | 0.11 gal. 0.42 l |
ST30 | 0.18 gal. 0.68 l |
Flange Dimensions | |
ST10 | |
Outer Diameter | 3.54 in. 90 mm |
Bolt Circle | 2.30–2.56 in. 58–65 mm |
Bolt Size | 1/2 in. 1/2 in. |
ST23 and ST26 | |
Outer Diameter | 4.25 in. 108 mm |
Bolt Circle | 2.95–3.13 in. 75–80 mm |
Bolt Size | 1/2 in. 1/2 in. |
ST30 | |
Outer Diameter | 4.92 in. 125 mm |
Bolt Circle | 3.35–3.54 in. 85–90 mm |
Bolt Size | 1/2 in. 1/2 in. |
Hose Inner Diameter | |
ST10 | 0.39 in. 10 mm |
ST23 | 0.91 in. 23 mm |
ST26 | 1.02 in. 26 mm |
ST30 | 1.18 in. 30 mm |
Weight | |
ST10 | 55–65 lbs 25–29 kg |
ST23 | 100–120 lbs. 45–54 kg |
ST26 | 190–215 lbs. 86–98 kg |
ST30 | 235–285 lbs 107–129 kg |
Noise | |
Sound Pressure | Less than 70 dB(A) Less than 70 dB(A) |
Wetted Parts | |
Hose options | Natural Rubber, CSM, EPDM, NBR Natural Rubber, CSM, EPDM, NBR |
Barbed fitting options | Stainless steel, PVDF, Hastelloy Stainless steel, PVDF, Hastelloy |
Technical Specifications for the Graco Motor Control (All installations and wiring must comply with NEC and local electrical codes.) | |
DC Power Supply | Class 2 Power Supply only Class 2 Power Supply only |
Approvals | UL508C UL508C |
Conformity | CE-Low Voltage (2006/95/EC), EMC (2004/108/EC), and RoHS (2011/65/EU) Directives CE-Low Voltage (2006/95/EC), EMC (2004/108/EC), and RoHS (2011/65/EU) Directives |
Ambient Temperature | -40°F – 104°F –40°C – 40°C |
Environment Rating | Type 4X, IP 66 Type 4X, IP 66 |
Overtemperature Sensing Specifications (The drive is provided with a means to accept and act upon a signal from a thermal sensor in the motor. Motor overtemperature sensing is required to provide the motor overload protection.) | 0–3.3 VDC, 1mA maximum 0–3.3 VDC, 1mA maximum |
Weight | 10.5 lb. 4.8 kg |
Input Specifications | |
Input Line Voltage | 120/240 VAC, line-to-line 120/240 VAC, line-to-line |
Input Line Phasing | Single Phase Single Phase |
Input Line Frequency | 50/60 Hz 50/60 Hz |
Input Current per Phase | 16A 16A |
Maximum Branch Circuit Protection Rating | 20A, Inverse Time Circuit Breaker 20A, Inverse Time Circuit Breaker |
Short Circuit Current Rating | 5 kA 5 kA |
Output Specifications | |
Output Line Voltage | 0–264 VAC 0–264 VAC |
Output Line Phasing | Three Phase Three Phase |
Output Current (Current limit, set via the software, is provided as a secondary protection from motor overload.) | 0–12A 0–12A |
Output Power | 1.92 KW / 2.6 hp 1.92 KW / 2.6 hp |
Output Overload | 200% for 0.2 seconds 200% for 0.2 seconds |
-
Prijenos kemikalija
Prijenosne pumpe i oprema za raspršivanje za kemikalije
-
Prijenos materijala srednjeg viskoziteta
Različite pumpe za relativno tekući materijal za sanitarne i industrijske pri...
-
Prijenos materijala niskog viskoziteta
Jednostavno prebacujte tekućine pomoću Graco industrijskih i sanitarnih pumpi
Povezani proizvodi
-
Husky 1050e Electric Diaphragm Pump
Up to 5x more efficient than air operated diaphragm pumps
-
SoloTech 23 Peristaltic Hose Pump
23 mm hose size. Maximum flow rate of 4.75 gpm (17.98 lpm) at 94 rpm.
-
SoloTech 26 Peristaltic Hose Pump
26 mm hose size. Maximum flow rate of 10.18 gpm (38.54 lpm) at 93 rpm.
-
SoloTech 30 Peristaltic Hose Pump
30 mm hose size. Maximum flow rate of 16.0 gpm (60.57 lpm) at 91 rpm.