Graco Inc.

SaniForce 3150 3A Double Diaphragm Pump  High Sanitation Double Diaphragm Drum

Up to a 4.0 inch tri-clamp connection, this easy to clean, quick knockdown air-operated double diaphragm sanitary pump has flow rates up to 150 gpm (568 lpm) and is 3A certified

Hol kapható?Információkérés

The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry.

Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess sanitation chemicals.

3150 3A Diaphragm Pump

SaniForce 3150 3A Double Diaphragm Pump:

  • Pumps up to 150 gpm (568 lpm)
  • Pump rotates 360° for easy draining
  • The only 3 inch pump certified by 3A for dairy applications
  • Featuring our lube free, non-sticking air valve
  • Transfer product from a variety of containers to smaller receptacles - up to 20,000 cps
  • Suitable to pump products such as: flowable sour cream, yogurt and flowable cheese spreads
SaniForce HS 3A Leak Detector

Designed to detect leaks!

  • Electronic leak detector is standard on the 3150 3A models
  • Designed to detect leaks caused when a diaphragm fails
  • Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
  • Uses an optical and conductivity sensor to ensure the utmost reliability
  • Powered by either 24v or 110/220v

 

3150 3A Diaphragm

EPDM Overmolded Diaphragms:

  • Approved for 3A applications
  • Easy cleaning with smooth, flat surfaces and no recessed areas
  • No exposed diaphragm plates to reduce contaminant collection

SaniForce 3150 HS and 3150 3A Diaphragm Pumps
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
175 scfm
5.0 m³/minute
Air consumption at 70 psi, 60 gpm
50 scfm
1.4 m³/minute
Maximum free-flow delivery
150 gpm
570 lpm
Maximum pump speed
145 cpm
145 cpm
Gallons/liters per cycle*
1.0 g
3.9 l
Air inlet size
0.5 in npt(f)
0.5 in npt(f)
Maximum suction lift
Flapper
10 ft wet, 5 ft dry
3.5 m wet, 1.7 m dry
Ball
18 ft wet, 9 ft dry
5.5 m wet, 2.7 m dry
Maximum size pumpable solids
Flapper
2.5 in
63.5 mm
Ball
1.0 in
25.4 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
90 dB(A)
90 dB(A)
Sound power level
103 dB(A)
103 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
85 dB(A)
85 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
PTFE
220°F
104°C
Santoprene®
180°F
82°C
Buna-N
180°F
82°C
Fluoroelastomer
250°F
121°C
3A Approved EPDM
275°F
135°C
Fluid inlet size
2.0 in sanitary flange
2.0 in sanitary flange
Fluid outlet size
2.0 in sanitary flange
2.0 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel, 3A Approved EPDM
316 stainless steel, 3A Approved EPDM
Wetted materials depending on model
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, polyester (labels), LDPE foam (gasket)
300 series stainless steel, polyester (labels), LDPE foam (gasket)
Weight
All Models
145 lb
66 kg
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements.