Graco Inc.

Xtreme Z45 and Z25  Electric Waterproofing Sprayers

A better way to apply waterproofing material

Request Info



Z45 Waterproofing Application

Improve surface quality, get better job efficiency

The Graco Xtreme Z45 and Z25 Electric Waterproofing Sprayers are a smart alternative to manually applying waterproofing materials with rollers. They produce a smooth, consistent, evenly distributed spray pattern – which results in less cracking, bubbling and rework.

Reduce labor costs by up to 40%

Working with a manual paint roller, one worker can complete 200 square meters of an external wall each day. The labor cost is $0.25 USD per square meter per person. With an Xtreme Z45, which requires three people, a crew can complete more than 1000 square meters of an external wall per day. The labor cost is reduced to $0.15 USD per square meter per person.

Portable, lightweight and easy to move

Take it anywhere. The Xtreme Z45 and Z25 weighs just 104 kg, so you can transport them through narrow doorways and up flights of stairs, as well. They operate on 230 volt 1-phase power, which is convenient and required on all jobsites.

• Sprays waterproofing materials evenly with a smooth, consistent spray pattern
• Improves surface quality – less cracking, bubbling and reduced rework compared to manual rolling
• Reduces labor costs by up to 40% compared to manual rollers
• Portable and lightweight – just 106 kg
• Uses 230 volt single phase power



Electric High Pressure Airless Sprayer
US
Metric
Metric
Maximum fluid working pressure (Models: 24X450, 24X451, 24Y452)
4500 psi
31 MPa, 310 bar
Maximum fluid working pressure (Models: 24W315, 24W316, 24Y317, 25A829)
2600 psi
17.9 MPa, 179 bar
Stroke length
4.75 in.
120 mm
Maximum continuous cycle rate (To prevent premature pump wear, do NOT exceed maximum recommended speed of fluid pump)
33 cycles per minute
33 cycles per minute
Weight
230 lbs
104 kg
Wetted Parts
Models 24X450, 24X451, 24Y452, 24W315, 24W316, 24Y317: Carbon Steel, Alloy Steel, 304, 440 and 17-PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum
Models 24X450, 24X451, 24Y452, 24W315, 24W316, 24Y317: Carbon Steel, Alloy Steel, 304, 440 and 17-PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Leather, Aluminum
Models 25A829: Carbon Steel, Alloy Steel, 304, 440 and 17-PH Grades of Stainless Steel, Zinc and Nickel Plating, Ductile Iron, Tungsten Carbide, PTFE; Aluminum
Operating temperature range *
23° to 120° F
-5° to 50° C
Input voltage
200-240 VAC, single phase, 50/60 Hz
200-240 VAC, single phase, 50/60 Hz
Input current
20A maximum
20A maximum
Sound pressure
74 dB at maximum cycle rate
74 dB at maximum cycle rate
Oil capacity
1.5 quarts
1.4 liters
Oil specification
Graco part number 16W645 ISO 220 silicone-free synthetic gear oil
Graco part number 16W645 ISO 220 silicone-free synthetic gear oil
Inlet/Outlet Sizes
Fluid inlet size
1-1/4 npt(m)
1-1/4 npt(m)
Fluid outlet size
3/8 npt(m)
3/8 npt(m)
Hose Requirements
Minimum pressure
4500 psi
31 MPa, 310 bar
Minimum length
50 ft
15 m
Minimum ID
3/8 in.
10 mm
Maximum resistance per ISO 8028
9100 Ω/ft
30,000 Ω/M
* Maximum fluid temperature of 25A829: 200° C (390° F)