Reactor 2 E-XP2i Integrated Proportioning System
Turnkey system for polyurea waterproof coating and lining - applies up to 2 gal (7.6 liters) per minute
The integrated series of Reactor 2 systems combines an electric proportioner and diesel generator into one package - an innovative, cost-saving design. In addition, the system offers the many advantages of the revolutionary Reactor 2 design.
Integrated design repurposes wasted heat and saves energy
- System pulls the heat from the diesel engine to heat the A and B materials, reducing electrical demand on the generator (See illustration for details)
- The system's smaller 20 kw generator uses less fuel than a standard 30 or 40 kw generator
- You benefit from an annual fuel savings on average of $7,000 (actual savings may vary)
Reactor 2 advanced features can revolutionize the way you run your business
Each feature in the Reactor 2 was strategically designed to help your business, with innovations that help your operation run smoothly. Software and hardware enhancements for better spray performance. And new technologies that add to your bottom line.
- Better control - with Graco InSite remote reporting, you can manage your spray foam or polyurea business wherever you are
- Better documentation - collect job log data automatically and confirm you sprayed to specifications
- Compact footprint - more room in your spray rig
- Advanced controls with more visible information and tracking capabilitiy
- Ergonomic design - easier maintenance and service
- Better spraying performance compared to traditional electric Reactor systems
- Advanced circuit boards - minimize pressure fluctuations
- Better management of fleet, crew, cost containment and forecasting
- Troubleshooting made quick and easy with QR codes
- 3-year warranty on major electronic components
- Energy-saving integrated design
- Graco InSite Remote Reporting Technology
- Inlet pressure and temperature sensors
- Advanced control module
- Stores up to 24 chemical recipes
- Easy-to-see drum level indicators
- More compact design
- New multi-zone heater control module
- Brushless DC motor
- On-screen QR codes for faster troubleshooting information
- Extreme-Wrap scuff guard
- Hydrovane tankless air compressor (optional)
- Refrigerated air dryer (optional)
Manuals
- 332636H, Reactor 2 Elite Integrated Proportioning System Operation (English) [other languages]
- 332637J, Reactor 2 Elite Integrated Proportioning System Repair and Parts (English) [other languages]
- 199496C, Integrated Reactor 2 Elite, 318-162 EC-Declaration of Conformity (European Community), English
332636H, Reactor 2 Elite Integrated Proportioning System Operation (English)
Literature
- 348986ENEU Reactor 2 [other languages]
- 300615ENEU Reactor™ Spray Foam and Polyurea Equipment [other languages]
- 349104ENEU Hoses, Guns and Accessories [other languages]
- 300738ENEU Ship & Rig Building Equipment [other languages]
- 349435EN-A, Reactor Maintenance Schedule
- 349890EN, Spray Foam Equipment Brochure
348986ENEU Reactor 2
300615ENEU Reactor™ Spray Foam and Polyurea Equipment
349104ENEU Hoses, Guns and Accessories
Other Resources
Reactor 2 Elite Integrated Proportioning Systems | |
U.S. |
Metric
Metric
|
Maximum Fluid Working Pressure | |
E-30i |
2000 psi
14 MPa, 140 bar
|
E-XP2i |
3500 psi
24.1 MPa, 241 bar
|
Maximum Fluid Temperature | |
E-30i |
150°F
65°C
|
E-30i with booster heater |
180°F
82°C
|
E-XP2i |
180°F
82°C
|
Maximum Output | |
E-30i |
30 lb/min
13.5 kg/min
|
E-XP2i |
2 gpm
7.6 lpm
|
Maximum Heated Hose Length | |
Length |
310 ft
94 m
|
Output per Cycle, A and B | |
E-30i |
0.0272 gal.
0.1034 liter
|
E-XP2i |
0.0203 gal.
0.0771 liter
|
Operating Ambient Temperature Range | |
Temperature |
20° to 120°F
-7° to 49°C
|
Auxiliary Power Available | |
Voltage |
120 Vac or 240 Vac, 60 Hz
120 Vac or 240 Vac, 60 Hz
|
Engine | |
Model |
Perkins 404–22G, 2.2 L, 29 HP
Perkins 404–22G, 2.2 L, 29 HP
|
Alternator | |
Model |
Mecc Alte 22 kW, 240 V, 1 PH, 60 Hz, pancake style
Mecc Alte 22 kW, 240 V, 1 PH, 60 Hz, pancake style
|
Battery Requirements | |
Voltage |
12 Vdc
12 Vdc
|
Minimum Cold Cranking Amps |
800 CCA
800 CCA
|
Connection Type |
Post Style
Post Style
|
Recommended Battery Size | |
BC Group Number |
34
34
|
Length |
10.25 in.
260 mm
|
Width |
6.81 in.
173 mm
|
Height |
7.88 in.
200 mm
|
Booster Heater Power | |
E-30i |
None
None
|
E-30i with booster heat |
4000 Watts
4000 Watts
|
E-XP2i |
4000 Watts
4000 Watts
|
Rotary Vane Air Compressor | |
Hydrovane Model V04 (PURS type), continuous run | |
Part No. |
025CK10
025CK10
|
Pressure |
140 psi
0.9 MPa, 9.6 bar
|
Specifications |
16 cfm
16 cfm
|
Required Features |
Thermal overload switch, Safety Relief Valve
Thermal overload switch, Safety Relief Valve
|
Motor: Baldor | |
Part No. |
EL1410–CUS
EL1410–CUS
|
Specifications |
5 HP, 1735 RPM, 240 V, 1 Phase, OPSB
5 HP, 1735 RPM, 240 V, 1 Phase, OPSB
|
Required Features |
C face, lift rings
C face, lift rings
|
Refrigerated Air Dryer | |
Hankison Model H1T20 | |
Specifications |
115VAC, 1 Phase, 60 Hz, 22 scfm at 150 psi (1 MPa, 10.3 bar)
115VAC, 1 Phase, 60 Hz, 22 scfm at 150 psi (1 MPa, 10.3 bar)
|
Required Features |
Pilot valve unloader
Pilot valve unloader
|
Noise, Sound Pressure measured per ISO-9614–2. | |
Sound Pressure measured from 3.1 ft (1 m), at 1500 psi (10 MPa, 103 bar), 2 gpm (7.6 lpm) |
91.0 dBA
91.0 dBA
|
Fluid Inlets | |
Component A (ISO) and Component B (RES) |
3/4 NPT(f) with 3/4 NPSM(f) union
3/4 NPT(f) with 3/4 NPSM(f) union
|
Fluid Outlets | |
Component A (ISO) |
#8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter
#8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter
|
Component B (RES) |
#10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
#10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
|
Fluid Circulation Ports | |
Size |
1/4 NPSM(m), with sst braided tubing
1/4 NPSM(m), with sst braided tubing
|
Maximum Pressure |
250 psi
1.75 MPa, 17.5 bar
|
Weight | |
E-30i |
1750 lb
794 kg
|
E–30i with compressor and dryer |
2200 lb
998 kg
|
E-30i with booster heat |
1800 lb
816 kg
|
E–30i with booster heat, compressor, and dryer |
2250 lb
1021 kg
|
E-XP2i |
1800 lb
816 kg
|
E–XP2i with compressor and dryer |
2200 lb
998 kg
|
Wetted Parts | |
Material |
Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, zinc plated carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
|
Accessories
-
Fusion Air Purge
For high output spray polyurethane foam and polyurea applications
-
Fusion CS
For high output spray polyurethane foam and polyurea applications
-
Probler P2
For high output spray polyurethane foam and polyurea applications
-
Reactor Heated Hose
For Reactor proportioners
-
T1 and T2 Transfer Pumps
Ideal for moving A and B materials to Reactor spray machines
-
Twistork Agitators
For mixing fluids in closed drums
Related Products
-
Reactor 2 E-30
Next generation technology for spray foam insulation and polyurea
-
Reactor 2 E-30i
Turnkey system for spray foam insulation and coating - applies up to 30 lb (13.6 kg) per minute
-
Reactor A-25
For spraying foam insulation - applies up to 25 lb (11.4 kg) per minute
-
Reactor E-10
For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute
-
Reactor E-10hp
Entry-level system for pure and hybrid polyurea coatings
-
Reactor E-20
For low- to medium-output foam insulation applications - applies up to 20 lb (9 kg) per minute
-
Reactor E-XP1
For polyurea coatings - applies up to 2 gal (7.6 liters) per minute
-
Reactor H-25, H-40 and H-50
For medium to high-output foam applications and roofing projects - applies up to 52 lb (23...
-
Reactor H-XP2 and H-XP3
For coatings that require high-pressures - applies up to 2.8 gal (10.6 liters) per minute