With features that make a great sprayer even better, the FinishPro™ II 395 PC is Graco’s premier solution to fine finishing. It delivers a high quality finish at a high production rate, and can handle the most challenging materials.
FinishPro II 395 PC Air-Assisted Airless Sprayer
The features and output to quickly deliver high-quality finishes


ProConnect™
- Fast and easy on-the-job Pump Replacement System
- 1-minute jobsite replacement in 3 simple steps
- Pinless design eliminates the chance of losing parts during the change-out process
- Endurance™ Now program available

SmartComp™
- Compressor is activated by the gun trigger—if you’re not spraying, it’s not running!
- Reduces jobsite noise, resulting in less fatigue
- Automatic shut-off reduces moisture entering the system and extends compressor life
- Pulling trigger delivers instant air to the gun with zero lag
- Release the trigger and SmartComp shuts off the compressor after 5 seconds
- Extends compressor life

High-Output On-Board Air Compressor
- Ideal for on-site finish jobs
- Delivers 3.2 cfm at 35 psi—enough air to break up the heaviest of materials
- Exclusive Pressure Unloader results in quieter operation
- Cooling coil reduces air temperature, extending the life of the critical compontents and providing safer operator handling

Endurance™ Pump
- The most reliable pump on the market—lasts 2 times longer than the next leading brand
- Long-life V-Max Blue™ packings, Chromex™ rod and hardened stainless steel cylinder
- QuikAccess™ intake valve for fast cleaning or debris clearing

Super-Flex™ Hose Set—By increasing flexibility and maneuverability, Graco’s Super-Flex Hose Set enables you to work in tight confines and helps you increase the quality of finish you’re laying down.
- The flexibility to get into tight spaces—focus on the task, not the tool!
- Extremely lightweight in hand, which reduces fatigue
- Connects directly to the gun for maximum flexibility
- Flex Wrap hose skin protects from paint build up and increases hose durability

Improved G40 Spray Gun
- An industrial quality air-assisted spray gun that delivers superior finishing results
- Integrated air valve improves gun handling
- RAC X™ air cap included
- Flat tip conversion kit included

SmartControl™ 1.0
- Delivers a consistent spray fan without pressure fluctuation at all spraying pressures
- Ideal for smaller tips commonly used for fine finish work
- Digital display accurately shows spraying pressure
Two Sprayers in One!
- Select air-assisted or airless modes, depending on what’s best for the application
Self-Contained & Portable
- One plug runs the entire unit, simplifying jobsite operation
Single Selector Switch
- Simple, color-coded labels easily identify airless and air-assisted modes
Includes:
- G40 Gun Air-Assisted Airless Gun
- 25 ft Super Flex Hose Set
- 1/4 in x 25 ft (6,4 mm x 7,5 m) Fluid Hose
- 1/8 in x 6 ft (3,2 mm x 1,8 m) Fluid Whip Hose
- 3/8 in x 25 ft (9,5 mm x 7,5 m) Air Hose
- 1/4 in x 6 ft (6,4 mm x 1,8 m) Air Whip Hose
- RAC X FFT210 SwitchTip
- RAC X LTX517 SwitchTip
- Precision Cut Fine Finish Flat Tip Kit
- AAM309 Flat Tip
- 100 Mesh Gun Filter
Manuals
- 334730E, FinishPro II 395 PC Airless/Air-Assisted Sprayers, English, Operation/Parts [other languages]
- 333182B, G40 Air Assisted Spray Gun, Instructions, English [other languages]
- 334599F, ProConnect Endurance Displacement Pump, Repair, English
- 199173M, G15/G40 Air-Assisted Spray Guns, 318-162 EC-Declaration of Conformity (European Community), English
- 199233M, Finish Pro II 395, 595, 318-162 EC-Declaration of Conformity (European Community)
334730E, FinishPro II 395 PC Airless/Air-Assisted Sprayers, English, Operation/Parts
Literature
- 320599ENEU , FinishPro II PC Pro [other languages]
- 300711ENEU Graco's solutions for Professional Contractors [other languages]
320599ENEU , FinishPro II PC Pro
FinishPro II 395 PC Airless/Air-Assisted Sprayers, Models: 17C417, 17C418, 17C421, 17C320, 17C321 | |
Sprayer | |
Power requirements |
★100/120V AC, 50/60 Hz, 15A, 1Ø
◆ 230V AC, 50/60 Hz, 10A, 1Ø
|
Generator Minimum |
4000 W
4000 W
|
Maximum Tip Size | |
US★ / UK★ |
0.021
0.021
|
Europe◆ / Asia/Australia◆ |
0.023
0.023
|
Maximum material output gpm (lpm) | |
US★ / UK★ |
0.47 gpm
1.8 lpm
|
Europe◆ / Asia/Australia◆ |
0.54 gpm
2.0 lpm
|
Maximum material pressure – Airless | |
US★ |
3300 psi
228 bar, 22.8 MPa
|
UK★ |
2800 psi
193 bar, 19.3 MPa
|
Europe◆ / Asia/Australia◆ |
3300 psi
228 bar, 22.8 MPa
|
Maximum material pressure – AA | |
US★ / UK★ |
2800 psi
193 bar, 19.3 MPa
|
Europe / Asia/Australia |
3300 psi
228 bar, 22.8 MPa
|
Atomizing air output | |
US★ / UK★ |
3.2 cfm
3.2 cfm
|
Europe / Asia/Australia |
2.9 cfm
2.9 cfm
|
Air pressure |
35 psi
2.4 bar
|
Dimensions | |
Length |
32.5 in.
82.5 cm
|
Width |
21 in.
53.3 cm
|
Height |
40.5 in.
102.8 cm
|
Weight (bare) |
110 lb.
49.9 kg
|
Noise** (dBa) level at 70 psi (4.8 bar, 0.48 MPa) | |
Sound pressure |
79 dBa
79 dBa
|
Sound power |
96 dBa
96 dBa
|
Materials of Construction. | |
Pump motor |
TEFC 7/8 HP DC
TEFC 7/8 HP DC
|
Compressor motor |
1.0 HP AC Induction
1.0 HP AC Induction
|
Material hose |
1/4 in. x 50-ft (blue)
1/4 in. x 15.2 m (blue)
|
Air hose |
3/8 in. x 50-ft (clear)
3/8 in. x 15.2 m (clear)
|
Gun |
G40 w RAC X tip
G40 w RAC X tip
|
Wetted materials on all models |
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, polyethylene, fluoroelastomer, urethane
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, polyethylene, fluoroelastomer, urethane
|
Notes | |
* Startup pressures and displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Sound pressure measured 3 feet (1 meter) from equipment. Sound power measured per ISO-3744. |