Graco Inc.

EcoQuip 2 EQ400t  Self-contained blasting trailer with 375 CFM @ 125 PSI compressor

Graco's largest self-contained, towable abrasive blasting trailer complete with integrated blaster and diesel compressor.

정보 요청

The Graco EcoQuip 2 EQ400t vapor blast machine is designed for the toughest high production projects and comes with two compressor options. First option is a Tier 3 compressor with 375 CFM @ 125 PSI.  Second option is a Tier 4i compressor with 375 CMF @175 PSI.


  • Industrial surface preparation
  • Restoration
  • Marine maintenance
  • Graffiti removal
  • Blast cleaning


Vapor Abrasive Blasting: A cleaner, easier path to profitable results

  • Generates less dust – 92 percent less airborne dust than dry blasting
  • Uses less water than traditional water-based wet blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • Uses less media than wet blasting, so clean up is minimal* and you save on media costs











EcoQuip 2 EQ400T Elite
Operating Temperature
35˚ - 110˚ F
1.6˚ - 43.3˚ C
Blast Hose Size
1.25 in. ID
31.75 mm ID
Abrasive Capacity*
880 lb.
400 kg
Pressure Pot Volume
6.5 cubic feet
184 liters
Water Tank Volume
130 gallon
492 liters
Tier 3
Maximum Working Pressure
125 psi
8.61 bar, 0.86 MPa
Dry Weight
6000 lb.
2721 kg
Wet Weight*
8000 lb.
3628 kg
Air Capacity
375 CFM
10.6 m^3/min
Tier 4
Maximum Working Pressure
175 psi
12.1 bar, 1.21 MPa
Dry Weight
7400 lb.
3356 kg
Wet Weight*
9400 lb.
4263 kg
Air Capacity
425 CFM
12 m^3/min
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense media will decrease weight.
Trailer Connections
Hitch Size
3 in. Lunette Ring (Pintel Eye)
3 in. Lunette Ring (Pintel Eye)
Electrical Connector
7–way Flat Pin
7–way Flat Pin
Sound Data**
Sound Pressure Level
133 dB(A)
133 dB(A)
Sound Power Level
139 dB(A)
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
131 dB(C)
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614-2.