Graco Inc.

EcoQuip EQ600s  Vapor Abrasive Blast Equipment

Portable, high production unit

정보 요청

Portable, high production unit 

Built to withstand the toughest working conditions, the EQ600s is a high-production standalone unit to tackle your largest, most demanding projects. It requires an air compressor at 375-600 cfm and features the same user-friendly features as its smaller version, the EQ300s. It fits inside a six-foot truck bed for easy transport to the jobsite and also stacks easily to conserve warehouse space.




Vapor Abrasive Blasting: A cleaner, easier path to profitable results

  • Generates less dust - 92 percent less airborne dust than dry blasting
  • Uses less water than traditional water-based wet blasting
  • Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust
  • ATEX approved units available for explosive atmospheres











Maximum Working Pressure
125 psi
8.6 bar, 0.86 MPa
Operating Temperature
35° – 110° F
1.6° – 43.3° C
Air Consumption
375 – 600 cfm
10.62–17.0 m³/min
Blast Hose Size
1.25 in. ID
31.75 mm ID
Abrasive Capacity
400 – 500 lb
181 – 227 kg
Dry Weight
1100 lb
499 kg
Wet Weight
2900 lb
1315 kg
Pressure Pot Volume
6.5 cubic feet
184 liters
Water Tank Volume
115 gallon
435 liters
Compressor Size and Hose Length (Minimum ID)
185–600 cfm compressor and less than 100 ft hose length
1.5 in.
38 mm
Over 600 cfm or greater then 100 ft. hose length
2 in.
51 mm
Sound Data: All readings were taken at the maximum system blast pressure 125 psi (8.6 bar, 0.86 MPa) from the operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with ISO 9614–2.
Sound Pressure Level
133 dB(A)
133 dB(A)
Sound Power Level
139 dB(A)
139 dB(A)
Instantaneous Sound Pressure Level
131 dB(C)
131 dB(C)