Graco Inc.

Hydra-Cat 고정 비율  기계식 혼합 장치

다양한 펌프 하부 설계를 통해 이액형 도료를 정밀하게 혼합

정보 요청

고정 비율 Hydra-Cat 혼합 장치는 공용 에어 모터로부터 2-3개의 정변위 펌프에 전력을 공급함으로써 이액형 도료를 정밀하게 주입합니다. 이를 통해 모든 펌프 하부의 스트로크 속도와 스트로크 길이가 동일하게 감소하도록 보장함으로써 일정한 혼합 비율을 제공합니다.

2개의 동일한 사이즈의 하부를 장착한 모델은 안정된 주입 압력을 제공하므로 패킹의 마모를 방지할 수 있습니다. 세 가지 펌프 하부와 여러 크기의 실린더를 갖춘 모델 중 선택을 통해 다양한 혼합비를 사용할 수 있습니다.

Hydra-Cat을 업그레이드 하고 싶습니까? Graco의 XP 이액형 도장기 제품 라인을 살펴보십시오.

  • 내마모성과 내구성을 갖춘 고부하 작업용 하부
  • 다양한 펌프 하부 구성을 통해 다양한 혼합 비율 제공
  • 두 개의 펌프 하부로 일정한 1:1 혼합비 제공
  • 세 개의 펌프 하부로 1:1을 초과한 비율의 일정한 혼합 제공
  • Hydra-Cat 하부 표준에 따른 PTFE 패킹

President Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
0.3–0.7 MPa, 3–7 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 210 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Stainless steel, Tungsten Carbide, Chrome plating, Carbon steel, PTFE, Ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 210 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, Tungsten carbide, fluoroelastomer
303 stainless steel, Tungsten carbide, fluoroelastomer
Sound, Tested in accordance with ISO 9614–2.
Sound pressure levels (dBa), (Input air pressures at 15 cycles/min.)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
73.6 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 78.3 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 80.9 dB(A) at 100 psi (0.7 MPa, 7 bar)
Sound power levels (dBa), (Input air pressures at 15 cycles/min.)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
87.4 dB(A) at 40 psi (0.3 MPa, 2.8 bar), 92.1 dB(A) at 70 psi (0.5 MPa, 4.8 bar), 94.6 dB(A) at 100 psi (0.7 MPa, 7 bar)
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps. Xper minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.

Bulldog Hydra-Cat Fixed Ratio Proportioning Pumps
Pumps
Air operating range
40–100 psi
280–700 kPa, 2.8–6.37 bar
Air consumption
See example below
See example below
Fluid inlet size
3/4 npt
3/4 npt
Fluid outlet size
3/8 npt
3/8 npt
Air inlet size
3/4 npt
3/4 npt
Maximum fluid outlet pressure
3000 psi
21 MPa, 207 bar
Maximum fluid inlet pressure
250 psi
1.7 MPa, 17 bar
Wetted parts
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Stainless steel, tungsten carbide, chrome plating, carbon steel, PTFE, ultra-high molecular weight polyethylene
Manifold assemblies
Manifold outlets
3/8 npt
3/8 npt
Hoses
3/8 in. ID, PTFE, cpld 3/8 npt(m) 4000 psi maximum working pressure
3/8 in. ID, PTFE, cpld 3/8 npt(m) 28 MPa, 276 bar maximum working pressure
Hoses
3/8 in. ID, nylon, cpld 3/8 npt(m) 3000 psi maximum working pressure
3/8 in. ID, nylon, cpld 3/8 npt(m) 21 MPa, 207 bar maximum working pressure
Automatic pressure relief valves wetted parts
303 stainless steel, tungsten carbide, fluoroelastomer
303 stainless steel, tungsten carbide, fluoroelastomer
Air consumption example
When the air pressure to the pump is 60 psi (410 kPa, 4.1 bar) and you are dispensing 1 gal. (3.8 liter) of mixed fluid per minute, air volume used, in cfm, will be about the same as the larger pressure ratio figure of your pump. See instruction manual for pressure ratios of pumps.