Graco Inc.

리액터 E-XP1 및 E-XP2  전기 코팅 혼합장치

폴리우레아 코팅용 - 분당 최대 2 갤런 (7.6 리터) 도포

정보 요청

Graco 리액터 E-XP1과 E-XP2 혼합장치는 고압을 요하는 폴리우레아 및 기타 코팅의 처리 및 분사를 위해 설계되었습니다. 하이브리드 히터와 가열 호스는 혼합을 하기 전에 도료를 알맞은 점도로 처리해 줍니다. 손쉬운 유지보수를 위해 빠르게 조립할 수 있는 하부 펌프와 간편한 제어, 견고한 이동형 설계로 인해 리액터는 코팅 작업을 위한 최선의 선택입니다.

Graco 리액터 E-Series 혼합장치는 신속하게 건조되는 폴리우레아 코팅을 위한 신뢰할 수 있는 파워, 성능 및 생산성을 제공합니다. 그 어느 때보다 더 빠르고 안정적으로 작업을 완성하십시오.

모든 Graco 리액터 E-Series 혼합장치는 다음을 제공합니다:

Graco Reactor E-XP1 Electric Plural-Component Sprayer
  • 강력한 하이브리드 히터는 도료의 신속한 예열을 위해 최대 15,300 와트의 가열 온도를 제공합니다.
  • 디지털 방식 열/압력 제어
  • 손쉬운 사용
  • 유지보수가 간편한 퀵 녹다운 하부 펌프
  • 견고한 이동형
  • 장기 수명의 씰이 부착된 순환 밸브
  • 탭 설정이 필요 없는 호스 열 변환기



Reactor E-20, E-30, E-XP1, E-XP2 Series
Maximum Fluid Working Pressure
Models E-20 and E-30: 2000 psi, Model E-XP1: 2500 psi, Model E-XP2: 3500 psi
Models E-20 and E-30: 14 MPa, 140 bar, Model E-XP1: 17.2 MPa, 172 bar, Model E-XP2: 24.1 MPa, 241 bar
Maximum Fluid Temperature
190°F
88°C
Maximum Output
Model E-20: 20 lb/min, Model E-30: 30 lb/min, Model E-XP1: 1 gpm, Model E-XP2: 2 gpm
Model E-20: 9 kg/min, Model E-30: 13.5 kg/min, Model E-XP1: 3.8 liter/min, Model E-XP2: 7.6 liter/min
Output per Cycle (A and B)
Model E-20 and E-XP1: 0.0104 gal., Model E-30: 0.0272 gal., Model E-XP2: 0.0203 gal.
Model E-20 and E-XP1: 0.0395 liter, Model E-30: 0.1034 liter, Model E-XP2: 0.0771 liter
Amperage Requirement
See Table 1, page 20 in manual 312065
See Table 1, page 20 in manual 312065
Heater Power
Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts
Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts
Sound Power, per ISO 9614–2
Model E-20: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 93.5 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 83.5 dB(A) at 3000 psi, 1.0 gpm
Model E-20: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 93.5 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 83.5 dB(A) at 21 MPa, 210 bar, 3.8 lpm
Sound Pressure 1 m from equipment
Model E-20: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 83.6 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 73.6 dB(A) at 3000 psi, 1.0 gpm
Model E-20: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 83.6 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 73.6 dB(A) at 21 MPa, 210 bar, 3.8 lpm
Fluid Inlets
3/4 npt(f), with 3/4 npsm(f) union
3/4 npt(f), with 3/4 npsm(f) union
Fluid Outlets
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum
1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum
Weight
Model E-20 and E-XP1: 342 lb, Model E-30: 400 lb, Models E-XP2 and E-30 with 15.3kW of heat: 438 lb
Model E-20 and E-XP1: 155 kg, Model E-30: 181kg, Models E-XP2 and E-30 with 15.3kW of heat: 198 kg
Wetted parts
Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Voltage Tolerance Range (50/60 Hz)
200–240 V ac Nominal, 1 Phase
195–264 V ac, 50/60 Hz
195–264 V ac, 50/60 Hz
200–240 V ac Nominal, 3 Phase Delta
195–264 V ac, 50/60 Hz
195–264 V ac, 50/60 Hz
350–415 V ac Nominal, 3 Phase Wye (200–240 V ac Line-to-Neutral)
338–457 V ac, 50/60 Hz
338–457 V ac, 50/60 Hz
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.