Graco Inc.

리액터 H-25, H-40 및 H-50  유압식 폼 혼합장치

고출력 폼 도포 및 지붕 프로젝트용 - 분당 최대 52 lb (23.6 kg) 도포

정보 요청

주택용 폼 단열 프로젝트에서 대규모 상업용 지붕 공사에 이르기까지 Graco의 리액터 유압식 폼 혼합장치 제품군은 성공적인 작업을 위한 신뢰성과 파워를 제공합니다.

리액터 H-25 기본 모델이지만 강력한 성능 제공.
최대 출력: 분당 22 lb (10 kg).


리액터 H-40 대량 도포를 위한 고출력. 
최대 출력: 분당 45 lb (20 kg).


리액터 H-50 Graco의 가장 강력한 폼 혼합장치. 
최대 출력: 분당 52 lb (23.6 kg).

모든 Graco 리액터 H-Series 혼합장치는 다음을 제공합니다:

Graco Reactor H-25 Hydraulic Plural-Component Sprayer
  • 디지털 방식 열/압력 제어 - 온도 및 압력 프로그래밍과 장치 성능 모니터링 가능
  • 수평 정변위 펌프 - 손쉬운 수리 및 최적의 스프레이 패턴 유지를 위한 간편한 전환 제공
  • 강력한 하이브리드 히터 - 도료의 신속한 가열 및 최대 유량 도장 시에도 온도 설정 값 유지

Hydraulic, Heated, Plural Component Proportioner
U.S.
Metric
Maximum Fluid Working Pressure
Models H-25 and H-40: 2000 psi. Model H-50 1 phase: 1700 psi. Model H-50 3 phase: 2000 psi. Models H-XP2 and H-XP3: 3500 psi
Models H-25 and H-40: (13.8 MPa, 138 bar) Model H-50 1 phase:(11.7 MPa, 11.7 bar) Model H-50 3 phase:(13.8 MPa, 138 bar) Models H-XP2 and H-XP3: (24.1 MPa, 241 bar)
Fluid: Oil Pressure Ratio
Models H-25 and H-40: 1.91:1. Model H-50: 1.64:1. Models H-XP2 and H-XP3: 2.79:1
Models H-25 and H-40: 1.91:1. Model H-50: 1.64:1. Models H-XP2 and H-XP3: 2.79:1
Fluid Inlets
Component A (ISO): 1/2 npt(f), 250 psi maximum. Component B (RES): 3/4 npt(f), 250 psi maximum
Component A (ISO): 1/2 npt(f), (1.75 MPa, 17.5 bar) maximum. Component B (RES): 3/4 npt(f), (1.75 MPa, 17.5 bar) maximum
Fluid Outlets
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter. Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter. Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing, 250 psi maximum
1/4 npsm(m), with plastic tubing,(1.75 MPa, 17.5 bar) maximum
Maximum Fluid Temperature
190°F
(88°C)
Maximum Output (10 weight oil at ambient temperature)
Model H-25: 22 lb/min (10 kg/min) (60 Hz). Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz). Model H-50: 52 lb/min (24 kg/min) (60 Hz). Model H-40: 45 lb/min (20 kg/min) (60 Hz). Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Model H-25: 22 lb/min (10 kg/min) (60 Hz). Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz). Model H-50: 52 lb/min (24 kg/min) (60 Hz). Model H-40: 45 lb/min (20 kg/min) (60 Hz). Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Output per Cycle (A and B)
Models H-25 and H-40: 0.063 gal. Model H-50: 0.073 gal. Models H-XP2 and H-XP3: 0.042 gal.
Models H-25 and H-40: (0.23 liter). Model H-50: (0.28 liter). Models H-XP2 and H-XP3: (0.16 liter)
Line Voltage Requirement
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz. 400V 3 phase units: 338-457 Vac, 50/60 Hz
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz. 400V 3 phase units: 338-457 Vac, 50/60 Hz
Amperage Requirement
See Systems page in instruction manual.
See Systems page in instruction manual.
Heater Power (A and B heaters total, no hose)
See Systems page in instruction manual.
See Systems page in instruction manual.
Hydraulic reservoir capacity
3.5 gal.
(13.6 liters)
Recommended hydraulic fluid
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
Sound power, per ISO 9614-2
90.2 dB(A)
90.2 dB(A)
Sound pressure, 1 m from equipment
82.6 dB(A)
82.6 dB(A)
Weight
Units with 8.0 kW Heaters: 535 lb. Units with 12.0 kW Heaters: 597 lb. Units with 15.3 kW Heaters (H-25/H-XP2 models):562 lb. Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): 597 lb. Units with 20.4 kW Heaters: 597 lb.
Units with 8.0 kW Heaters: (243 kg). Units with 12.0 kW Heaters: (271 kg). Units with 15.3 kW Heaters (H-25/H-XP2 models): (255 kg). Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): (271 kg). Units with 20.4 kW Heaters: (271 kg)
Wetted Parts
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.