Graco Inc.

RS 촙 건  블레이드를 단 몇 초 안에 교체

복합재료 생산을 위한 혁신적인 절단 건

정보 요청

FRP 가동 시간을 증가시키고 성공적인 생산을 유지

신제품 Graco RS 촙 건을 통해 작업자는 "사고로부터 안전한" 독특한 디자인의 블레이드 카트리지를 몇 초 안에 교체할 수 있습니다. 전통적인 커터의 교체 시간은 15분입니다. 또한 블레이드와 앤빌을 생산 라인에서 교체함으로써 유리섬유 강화 플라스틱 제품의 생산을 위한 가동 시간을 늘릴 수 있습니다.

더 나은 분사 제어를 위한 경량 설계로 경쟁 제품보다 최대 44% 더 가볍습니다. Graco RS 촙 건은 뛰어난 스프레이 패턴을 제공하며 VOC 배출을 줄여줍니다.

Graco has designed a gun specifically to spray fiberglass reinforced plastics (FRP) that is reliable, lightweight and is easy to maintain.

The RS chop gun or “chopper gun” uses a mounted fiberglass cutter, that makes sure you add cut pieces of fiberglass into the catalyzed resin stream for added strength and stability.

 

Graco has designed a gun specifically to spray fiberglass reinforced plastics (FRP) that is reliable, lightweight and is easy to maintain.

The RS chop gun or “chopper gun” uses a mounted fiberglass cutter, that makes sure you add cut pieces of fiberglass into the catalyzed resin stream for added strength and stability.

 

frp-tool

Quick blade changes

The fiberglass chopper gun standardly uses a magnetic cutter drum, which uses a magnet in the cutter head which holds the blades in place. This makes blade changes quick and easy

But Graco now also offers the option to use blade cartridges in stead of he magnetic drum.

Cartridges add convenience and speed to the production line. Blades can be switched in under a minute, right on the production line. No more stopping production to switch guns. No more taking the gun to the workbench. Instead, blades can be quickly switched on the production line.

Blade cartridges are available in 4,6 and 8 blades

 

RS Chopper Gun

Lightweight design

Its lightweight design allows for a better spraying control. The Graco RS Chop Gun delivers a superior spray pattern, with reduced VOC- emissions (Volatile Organic Compounds) as well.

See Our Equipment
in Action

Graco RS Chop Gun
  • 교환이 쉬운 블레이드 카트리지로 생산성 향상
  • 고성능 커터는 더 적은 조방사로 더 많은 결과를 산출
  • 더 적은 조방사는 엉킴 감소와 가동 시간 증가를 의미
  • 앤빌 인장 강도 외부 조절식 - 분해나 공구가 필요 없음
  • 속도 제어로 유리 산출량을 즉석에서 조정
  • AAC(Air Assist Containment) 표준
  • 내부 또는 외부 혼합 모델 중 선택 가능
RS Chop Gun more

공구가 필요 없는 블레이드 설계

  • 공구가 필요 없음 – 몇 초 안에 블레이드를 교체
  • 생산 라인에서 블레이드를 교체함으로써 가동 시간이 증가
  • 작업자는 블레이드에 손을 댈 필요도 없음
  • 블레이드에 베이는 사고가 사실상 사라짐

RS Gun and Cutter
Maximum Fluid Working Pressure
Internal Mix
258853
2000 psi
138 bar,14 MPa
258854
2000 psi
138 bar, 14 MPa
258971
2000 psi
138 bar, 13.8 MPa
External Mix
258840
3000 psi
207 bar, 21 MPa
258852
3000 psi
207 bar, 21 MPa
258970
3000 psi
207 bar, 21 MPa,
Maximum Catalyst Working Pressure
258853
2000 psi
138 bar, 14 MPa
258854
2000 psi
138 bar, 14 MPa
258971
2000 psi
138 bar, 13.8 MPa
258840
200 psi
14 bar, 1.4 MPa
258852
200 psi
14 bar, 1.4 MPa
258970
200 psi
14 bar, 1.4 MPa
Air Inlet Working Pressure
258853
0–125 psi
0–8.6 bar, 0–0.86 MPa
258854
0–125 psi
0–8.6 bar, 0–0.86 MPa
258971
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
258840
0–125 psi
0–8.6 bar, 0–0.86 MPa
258852
0–125 psi
0–8.6 bar, 0–0.86 MPa
258970
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
24E512
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
Maximum Fluid Temperature
258853
100°F
38°C
258854
100°F
38°C
258971
100°F
38°C
258840
100°F
38°C
258852
100°F
38°C
258970
100°F
38°C
Minimum Air Flow (at 100 psi, 7 bar, 0.7 Mpa)
258853
12.5 scfm
0.345 m³ per min.
258854
2.25 scfm
0.064 m0.345 m³ per min.
258840
2.0 scfm
0.6 m0.345 m³ per min.
24E512
16.5 scfm
16.5 m0.345 m³ per min.
Cutter Minimum Air Pressure
80 psi
550 kPa, 5.5 bar
Maximum Aiur Pressure
125 psi
9 bar, 0.9 MPa
Maximum Fluid Temperature
100°F
38°C
Cuter Maximum Glass Output *At 80 psi (550 kPa, 5.5 bar) air pressure
One Strand
3.8 lb/min
1.7 kg/min
Two Strands
6.7 lb/min
3.0 kg/min
Three Strands
8.0 lb/min
3.6 kg/min
Cuter Maximum Glass Output *At 100 psi (7 bar, 0.7 Mpa) air pressure
One Strand
4.3 lb/min
2.0 kg/min
Two Strands
7.6 lb/min
3.4 kg/min
Three Strands
9.8 lb/min
9.8 kg/min
Wetted Parts
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Materials of Construction
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Weight
258853
2.32 lb
1.05 kg
258854
2.46 lb
1.12 kg
258840
2.08 lb
0.94 kg
258852
2.33 lb
1.04 kg
24E512
2.00 lb
0.91 kg
Sound Power *Measured per ISO-3746.
258853
98.1 dB (A) at 60 psig
98.1 dB (A) at 60 psig
258854
90.6 dB(A) at 50 psig
90.6 dB(A) at 50 psig
258840
90.8 dB(A) at 50 psig
90.8 dB(A) at 50 psig
24E512
111.5 dB(A) at 100 psig and maximum speed
111.5 dB(A) at 100 psig and maximum speed
Sound Power *Measured at 3 ft (1 m) from equipment..
258853
80.3 dB (A) at 60 psig
80.3 dB (A) at 60 psig
258854
72.8 dB(A) at 50 psig
72.8 dB(A) at 50 psig
258840
73.0 dB(A) at 50 psig
73.0 dB(A) at 50 psig
24E512
93.7 dB(A) at 100 psig and maximum speed
93.7 dB(A) at 100 psig and maximum speed