Graco Inc.

RS 겔 코트 건  차세대 겔 코트 건을 경험해 보십시오.

복합재료 생산을 위한 인체 공학적 겔 코트 건

정보 요청

Graco RS 겔 코트 건 설계에 반영된 혁신이 생산 가동시간을 증가시킬 것입니다. 인체 공학적으로 설계된 이 경량 제품은 공구가 필요 없이 빠르고 쉬운 유지보수가 가능합니다.

또한 Graco RS 겔 코트 건은 AAC(Air Assist Containment) 기술을 통해 뛰어난 스프레이 패턴을 제공합니다. AAC는 스프레이 패턴을 공기 쉴드로 감싸 분무된 액적이 스프레이 패턴을 빠져나가는 것을 방지합니다. 오버스프레이 감소는 도료의 낭비를 줄이고 더 건전한 근무 환경을 창출합니다.

Graco RS Gun

Innovations engineered into the Graco RS Gel Coat Gun are sure to make a difference in your production uptime. It's lighweight, ergonomic, designed for tool-less operation and fast, easy maintenance as well. It’s available in internal and external mixing gelcoat spray guns.

Air Assist Containment

The Graco RS Gelcoat spray gun delivers an excellent spray pattern with its Air Assist Containment (AAC) technology. AAC wraps the spray pattern in a containment shield of air - preventing atomized droplets from escaping the spray pattern.

AAC creates a spray pattern where the droplets travel to the mold at very low pressure. The low speed or “particle velocity” creates very little turbulence or disturbance in the liquid when the droplet makes contact with the mold, increasing the transfer efficiency. AAC spraying dramatically reduces the chances of air entrapment and porosity.

 

frp-catalyst-yes-no

1. Resin
2. Catalyst
3. Graco Air Assist Containment AFTER introduction of catalyst
4. Atomized droplets are kept or 'contained' in the spray pattern
5. Traditional Air Assist Containment: BEFORE introduction of catalyst
6. Some atomized droplets escape the spray pattern

 

Fast switch tip design - MACT compliant technology

Todays gelcoat market uses 2 different technologies. Mechanical Air Atomized (Air Assisted Airless) and Mechanical Non-Air Atomized (Impingement). Using the RS guns allows you to switch from one technology to the other by simply changing the spray tip. This can be done quickly and cost effectively

 

impingementtip_FRP_ENEU

See Our Equipment
in Action

Graco RS Gun
  • 경량 - 더 나은 분사 제어를 위해 경쟁 제품보다 최대 44% 더 가벼움
  • 빠른 분리가 가능한 프런트 엔드로 인한 유지보수 시간 감소 및 가동 시간 증가
  • 독특한 니들 클램프 설계로 일상 작업 후 매번 니들을 설정해주어야 하는 필요성 제거
  • 뛰어난 스프레이 패턴 제공
  • 오버스프레이 감소로 더욱 건전한 근무 환경 창출
  • 내부 또는 외부 혼합 모델 중 선택 가능

RS Gun and Cutter
Maximum Fluid Working Pressure
Internal Mix
258853
2000 psi
138 bar,14 MPa
258854
2000 psi
138 bar, 14 MPa
258971
2000 psi
138 bar, 13.8 MPa
External Mix
258840
3000 psi
207 bar, 21 MPa
258852
3000 psi
207 bar, 21 MPa
258970
3000 psi
207 bar, 21 MPa,
Maximum Catalyst Working Pressure
258853
2000 psi
138 bar, 14 MPa
258854
2000 psi
138 bar, 14 MPa
258971
2000 psi
138 bar, 13.8 MPa
258840
200 psi
14 bar, 1.4 MPa
258852
200 psi
14 bar, 1.4 MPa
258970
200 psi
14 bar, 1.4 MPa
Air Inlet Working Pressure
258853
0–125 psi
0–8.6 bar, 0–0.86 MPa
258854
0–125 psi
0–8.6 bar, 0–0.86 MPa
258971
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
258840
0–125 psi
0–8.6 bar, 0–0.86 MPa
258852
0–125 psi
0–8.6 bar, 0–0.86 MPa
258970
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
24E512
80–125 psi
5.5–8.6 bar, 0.55–0.86 MPa
Maximum Fluid Temperature
258853
100°F
38°C
258854
100°F
38°C
258971
100°F
38°C
258840
100°F
38°C
258852
100°F
38°C
258970
100°F
38°C
Minimum Air Flow (at 100 psi, 7 bar, 0.7 Mpa)
258853
12.5 scfm
0.345 m³ per min.
258854
2.25 scfm
0.064 m0.345 m³ per min.
258840
2.0 scfm
0.6 m0.345 m³ per min.
24E512
16.5 scfm
16.5 m0.345 m³ per min.
Cutter Minimum Air Pressure
80 psi
550 kPa, 5.5 bar
Maximum Aiur Pressure
125 psi
9 bar, 0.9 MPa
Maximum Fluid Temperature
100°F
38°C
Cuter Maximum Glass Output *At 80 psi (550 kPa, 5.5 bar) air pressure
One Strand
3.8 lb/min
1.7 kg/min
Two Strands
6.7 lb/min
3.0 kg/min
Three Strands
8.0 lb/min
3.6 kg/min
Cuter Maximum Glass Output *At 100 psi (7 bar, 0.7 Mpa) air pressure
One Strand
4.3 lb/min
2.0 kg/min
Two Strands
7.6 lb/min
3.4 kg/min
Three Strands
9.8 lb/min
9.8 kg/min
Wetted Parts
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Materials of Construction
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Aluminum, stainless steel, carbon steel, carbide, chemically resistant op-rings
Weight
258853
2.32 lb
1.05 kg
258854
2.46 lb
1.12 kg
258840
2.08 lb
0.94 kg
258852
2.33 lb
1.04 kg
24E512
2.00 lb
0.91 kg
Sound Power *Measured per ISO-3746.
258853
98.1 dB (A) at 60 psig
98.1 dB (A) at 60 psig
258854
90.6 dB(A) at 50 psig
90.6 dB(A) at 50 psig
258840
90.8 dB(A) at 50 psig
90.8 dB(A) at 50 psig
24E512
111.5 dB(A) at 100 psig and maximum speed
111.5 dB(A) at 100 psig and maximum speed
Sound Power *Measured at 3 ft (1 m) from equipment..
258853
80.3 dB (A) at 60 psig
80.3 dB (A) at 60 psig
258854
72.8 dB(A) at 50 psig
72.8 dB(A) at 50 psig
258840
73.0 dB(A) at 50 psig
73.0 dB(A) at 50 psig
24E512
93.7 dB(A) at 100 psig and maximum speed
93.7 dB(A) at 100 psig and maximum speed