Graco Inc.

TexSpray Mark V  Electric Airless Texture Sprayer

Graco’s original electric airless texture sprayer, with 20 percent more productivity than the Mark IV

정보 요청
Texture Spray Ceiling

The Graco TexSpray Mark V is built to deliver a higher flow rate that lets you get the job done faster. It features 20 percent more productivity than the Mark IV and comes with an upgraded Heavy-Duty Texture Gun. It can accommodate a larger tip size, and has the power to spray skim coat in a Level 5 finish, drywall mud in an orange peel, splatter or knockdown finish or even the wide range of primers and paint.

TexSpray Mark V Standard

The Standard Series sprayer comes with these "Only On A Graco" features:

  • MaxPower Brushless DC Motor – Never change brushes with this maintenance-free, totally enclosed motor.
  • Advantage Drive System – Runs quiet and has a lifetime guarantee.
  • SmartControl 3.0 Pressure Control – Delivers consistent spray fan without pressure fluctuations at all spraying pressures, and includes ProGuard technology.
  • Endurance Pump with Max Flo+ – Amazingly durable and easy-to-service design means less downtime on the job.
  • Rugged Cart Design – Chrome over steel makes this durable cart last for years.
  • Ceramic and Stainless Steel Ball Sets – Provides maximum versatility no matter what you’re spraying.
  • Easy Out Pump Filter – Spill less material when removing the filter element.
  • Heavy-Duty Prime Valve – Maintenance-free design withstands high pressure dumping.

TexSpray Mark V ProContractor

The ProContractor Series sprayer has all the features of the Standard Series, plus:

  • QuikReel – Deploy and rewind up to 300 ft of hose in seconds without twists or coils.
  • LED Display – Bright easy-to-read LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.
  • WatchDog Pump Protection System – Saves the pump from damage when paint or texture material runs out or a hose breaks.
  • ProConnect 2 Pump Removal System – Change out the pump using no tools in seconds resulting in quickly getting back to work.
  • FastFlush Cleaning System – Cleans the unit four times faster using only half the water.
  • On-Board Toolbox – End frustration and save time by never again searching for tips, filters, and tools.
  • Ready to Spray – Save setup time, thanks to the 100 ft of hose and gun that’s already attached and ready to use.

TexSpray Mark V IronMan

The IronMan Series sprayer has all the features of the Standard Series, plus:

  • MaxLife Extreme Duty Pump – Keeps you working longer between repacks.
  • ProConnect 2 – Change out the pump using no tools in seconds resulting in quickly getting back to work.
  • Roll Cage Frame – Innovative steel design withstands rugged environments and protects critical sprayer components.
  • LED Display Bright easy-to-ead – LED display shows pressure readout, job/lifetime/gallon counter and self diagnostics.
  • Flat-Proof Tires – Roll through even the worst jobsite debris without ever going flat.
  • FastFlush Cleaning System – Cleans the unit up to 4X faster using only half the water!
  • WatchDog – Save the pump from damage when material runs out or if a hose breaks.
  • Additional 50 ft of Hose – Gives you the versatility to work farther away from the sprayer.

TexSpray Mark V Sprayers Include:

  • Heavy-Duty Texture Gun
  • LTX425 SwitchTip and Guard
  • 3/8 in x 50 ft (9.5 mm x 15 m) BlueMax II Airless Hose
  • 1/4 in x 3 ft (6.4 mm x 0.9 m) Whip Hose

Mark V Sprayers
Sprayer
Maximum Delivery
North American and UK Models
1.35 gpm
5.1 lpm
International Models
1.2 gpm
4.5 lpm
Maximum Tip Size
North American and UK Models
0.039
0.039
International Models
0.035
0.035
Fluid Outlet npsm
3/8 in
3/8 in
Cycles
110 per gallon
29 per liter
Generator Minimum
5000 W
5000 W
120V, A, Hz
20/15, 50/60
20/15, 50/60
Dimensions
Weight:
Standard Series Hi-Boy
130 lb
59 kg
ProContractor
151 lb
68 kg
IronMan
137 lb
62 kg
Height:
Standard Series Hi-Boy
38.5 in. (Handle up)
97.8 cm (Handle up)
ProContractor
39 in
99 cm
IronMan
40.2 in
102 cm
Length:
Standard Series Hi-Boy
26 in
66 cm
ProContractor
28 in
71 cm
IronMan
29.9 in
76 cm
Width:
Standard Series Hi-Boy
24 in
61 cm
ProContractor
24 in
61 cm
IronMan
24.4 in
62 cm
Wetted parts
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, PEEK, brass
zinc- and nickel-plated carbon steel, nylon, stainless steel, PTFE, Acetal, leather, UHMWPE, aluminum, tungsten carbide, PEEK, brass
Noise Level:
Sound Power, dBa per ISO 3744; measured at 3.1 ft (1 m)
91 dBa
91 dBa
Sound Pressure, dBa per ISO 3744; measured at 3.1 ft (1 m)
82 dBa
82 dBa