Graco Inc.

NVH 폼용 HFR 미터링 시스템  유압식 고정 비율 폴리우레탄 처리 시스템

자동차 제조 부문의 음향 폼 애플리케이션용

정보 요청

Graco HFR 미터링 시스템의 다목적성은 분명 자동차용 NVH(소음, 진동, 잡소리) 애플리케이션을 다시 정의하게 될 것입니다. HFR 미터링 시스템의 모듈식 설계와 Graco 기술 및 정밀 분배 능력이 결합하여 자동차 제조업체들에게 신뢰성을 갖춘 저렴한 첨단 시스템을 제공합니다.

NVH 폼용 Graco HFR 미터링 시스템은 전통적인 RIM 시스템에 대한 저렴한 대안입니다. 맞춤형이 아닌 표준 구성 제품입니다. 낮은 초기 투자 비용으로 인해 제조업체들은 전에는 불가능했던 음향 폼 애플리케이션을 사용할 수 있게 되었습니다.

  • 더 낮은 초기 투자로 더 많은 기술 활용
  • 소형 - 작은 공간만을 요하므로 귀중한 공간 절약 가능
  • 낮은 소유 비용 - 수평 펌프 재구축
  • 고급 제어장치로 시스템 모니터링
  • 정확한 샷과 반복 가능한 분배

carousel_afd_nvh
  • 정밀 비율의 분배로 재료 낭비 감소 및 수익성 향상
  • 적은 비용으로 더 많은 기술 활용
  • 완벽한 설정 가능
  • 100개의 샷 사이즈와 각각 20개 포지션으로 구성된 5개의 시퀀스 저장
  • 작은 공간만을 요하므로 공장 내 공간 절약 가능
  • 직관적이고 간편한 제어로 인한 훈련 단순화
  • 통합 USB를 사용하여 향후 추가 분석을 위해 처리 데이터를 플래시 드라이브로 다운로드 가능

매뉴얼

HFR
Honda GX 200 Engine
ANSI Power Rating @ 3600 rpm
6.5 Horsepower
4.8 kW
Maximum Working Pressure
Base Coat Pump
1000 psi
69 bar, 6.9 MPa
Top Coat Pump
3300 psi
228 bar, 22.8 MPa
Noise Level
Sound Power
105 dBa per ISO 3744
105 dBa per ISO 3744
Sound Pressure
96 dBa measured at 3.1 ft
96 dBa measured at 1 m
Maximum Delivery Rating
Base Coat Pump
3.0 gpm
11.36 liter/min
Top Coat Pump
2.20 gpm
8.33 liter/min
Maximum Tip Size
Base Coat Pump
1 applicator with .071 in. tip
1 applicator with 10 mm Nozzle
Top Coat Pump
1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
1 gun with 0.048 in. tip, 2 gun with 0.035 in. tip, 3 gun with 0.027 in. tip, 4 gun with 0.023 in. tip
Inlet Paint Strainer
Base Coat Pump
2 in. npsm, #5 mech sst
2 in. npsm, #5 mech sst
Top Coat Pump
1 in. npsm, #8 mesh sst
1 in. npsm, #8 mesh sst
Pump Inlet Size
Base Coat Pump
2 in. QD Camlock male coupler
2 in. QD Camlock male coupler
Top Coat Pump
1 in. – 11.5 npsm
1 in. – 11.5 npsm
Fluid Outlet Size
Base Coat Pump
1 in. QD Camlock male coupler
1 in. QD Camlock male coupler
Top Coat Pump
3/8 npsm
3/8 npsm
Wetted Parts
Wetted Parts
zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating
zinc-plated carbon steel, PTFE, nylon, polyurethane, UHMW, polyethylene, luoroelastomer, acetal, leather, aluminum, tungsten carbide, nickel- and zinc-plated carbon steel, stainless steel, chrome plating

HFR
Maximum Fluid Working Pressure
3000 psi
207 bar, 20.7 MPa
Maximum Fluid Temperature
190°F
88°C
Fluid Inlet Feed Pressure Range
50 psi to 250 psi
3.5 bar, 0.35 MPa to 17.5 bar, 1.75 MPa
Fluid Inlets
Component A (Red)
1/2 npt(f)
1/2 npt(f)
Component B (Blue)
3/4 npt(f)
3/4 npt(f)
Fluid Outlets
Component A (Red)
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
#8 (1/2 in.) JIC (3/4-16 unf), with #5 (5/16 in.) JIC adapter
Component B (Blue)
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
#10 (5/8 in.) JIC (7/8-14 unf), with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing, 250 psi maximum
1/4 npsm(m), with plastic tubing, 17.5 bar, 1.75 MPa maximum
Line Voltage Requirement
230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
230V / 1 phase and 230V / 3 phase Models: 195-264V, 50/60 Hz400V / 3 phase: 360-440V, 50/60 Hz
Amperage Requirement
See Models in instruction manual 313997
See Models in instruction manual 313997
Sound Power
93 dB
93 dB
Heater Power
A (Red) and B (Blue) heaters total, no hose, Heated HFR Models only
12kW
12kW
Hydraulic reservoir capacity
9 gal
34 liters
Recommended hydraulic fluid
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
Weight
Units with 12 kW Heaters
868 lb
394 kg
Units without heaters
634 lb
288 kg
Wettet Parts
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.