Graco Inc.

다이나-스타 10:1 및 다이나-스타 5:1 모듈  유압 동력식 윤활 펌프

저압 또는 고압 유압 회로에 태핑함으로써 오래 지속되는 고압 성능

정보 요청

견고한 구조 및 채광 장비는 새로운 윤활유를 이용하여 중요 피벗 포인트의 오염물을 세정합니다. Graco의 자동 윤활 시스템은 윤활유 연속 보충 기능을 통해 높은 비용이 소요되는 부품 결함을 방지합니다.

Dyna-Star 10 1 & 5 1 features
  • 모든 오프로드 장비에 적합하도록 60 lb(27 kg), 120 lb(54 kg) 및 400 lb(181 kg) 펌프 길이 및 60 lb(27 kg) 및 90 lb(41 kg) 저장소 옵션의 다양한 종류
  • 주입기 또는 디바이더 밸브를 토대로 한 시스템의 사전 구성 펌프 키트로 유연성이 극대화됩니다
  • Graco의 선택 사양인 컨트롤러, 레벨 지압계, 압력 스위치, 팔로어 플레이트 및 드럼 커버를 이용하여 시스템을 제어할 수 있으며 사후 조치가 더 이상 불필요 합니다
  • 편리한 내장형 압력 및 유량 제어장치
  • 유압 컨트롤 모듈-전체 제어장치의 단일 패키지로 시스템 셋업 및 유지 관리가 용이합니다

 

5:1 Dynastar Pump Module
Maximum hydraulic input pressure
3500 psi
241 bar, 24 MPa
Pump wetted parts
See manual 308156
See manual 308156
Vent valve wetted parts
See manual 309099
See manual 309099
Reservoir wetted parts
steel, buna–n rubber
steel, buna–n rubber
Maximum delivery
66 oz/min at 3 gpm hydraulic flow rate
119 in³/min, 1952 cm³/min at 3 gpm hydraulic flow rate
Hydraulic pressure operating range
800 to 1200 psi
55 to 83 bar, 5.5 to 8 MPa
Hydraulic flow rate operating range
0.5 to 3.0 gpm
1.9 to 11.4 lpm
Lubricant outlet pressure range
2500 to 3500 psi
172 to 241 bar, 17 to 24 MPa
Reservoir overflow port size
1/2 npt
1/2 npt
Reservoir fill port size
1/2 npt
1/2 npt
Hydraulic inlet port size
3/8 in nps swivel
3/8 in nps swivel
Hydraulic tank line size
3/4 in nps swivel
3/4 in nps swivel
Lubricant outlet port size
1/2 nps swivel
1/2 nps swivel
Grease capacity
90 lb
90 lb
Mounting holes for pump module
Six 7/16 in holes on 13 7/8 in bolt circle
Six 7/16 in holes on 13 7/8 in bolt circle
Reservoir diameter
12 3/4 in
324 mm
Pump module height
37 3/4 in
959 mm
Electrical requirements
Timed 24 VDC signal
Timed 24 VDC signal
Electrical power requirements
14.7 Watts
14.7 Watts
Filtration (hydraulic fluid)
10μ (microns) or better
10μ (microns) or better
Sound pressure (Reading taken with pump operating at 66 cycles per minute. Measured per CAGI–PNEUROP, 1971)
77 dB (A)
77 dB (A)

10:1 Dyna-Star Pump Module
Maximum hydraulic input pressure
3500 psi
240 bar, 24.0 MPa
Pump wetted parts
See manual 312350
See manual 312350
Vent valve wetted parts
See manual 309099
See manual 309099
Reservoir wetted parts
Steel, buna-n rubber
Steel, buna-n rubber
Maximum delivery @ 60 cpm
1.1 lb/min, 34.8 in³/min
570 cm³/min
Regulated hydraulic pressure operating range
Models: 247444, 247574, 247456, 247457, 247970: 250 to 350 psi, Models: 247706, 247707: 250 to 450 psi
Models: 247444, 247574, 247456, 247457, 247970: 1.7 to 2.4 MPa, 17.0 to 24.1 bar, Models: 247706, 247707: 1.7 to 3.1 MPa, 17.0 to 31.0 bar
Hydraulic flow rate operating range
0.5 to 3.0 gpm
1.9 to 11.4 lpm
Maximum hydraulic fluid temperature
200°F
93.33°C
Lubricant outlet pressure range
Models: 247444, 247574, 247456, 247457, 247970: 2500 to 3500 psi, Models: 247706, 247707: 2500 to 4500 psi
Models: 247444, 247574, 247456, 247457, 247970: 17.0 to 24.0 MPa, 170 to 240 bar, Models: 247706, 247707: 17.0 to 31.0 MPa, 170 to 310 bar
Reservoir overflow port size
1/2 in npt
1/2 in npt
Reservoir fill port size
1/2 in npt
1/2 in npt
Hydraulic inlet port size
3/8 in nps swivel
3/8 in nps swivel
Hydraulic tank line size
3/4 in nps swivel
3/4 in nps swivel
Lubricant outlet port size
1/2 in nps swivel
1/2 in nps swivel
Grease capacity
Model 247444, 247707: 90 lb, Model 247574, 247706: 60 lb
Model 247444, 247707: 41 kg, Model 247574, 247706: 27 kg
Mounting holes for pump module
six, 7/16 in holes on 13 7/8 in bolt circle
six, 7/16 in holes on 13 7/8 in bolt circle
Reservoir diameter
12 3/4 in
324 mm
Pump module height
Model 247444, 247707: 42.75 in, Model 247574, 247706: 35.15 in
Model 247444, 247707: 1086 mm, Model 247574, 247706: 893 mm
Electrical requirements
Timed 24 VDC signal
Timed 24 VDC signal
Electrical power requirements
14.7 Watts
14.7 Watts
Filtration (hydraulic fluid)
10μ (microns) or better
10μ (microns) or better
Sound Pressure (reading taken with pump operating at 66 cycles per minute. Sound pressure measured per CAGI-PNEUROP, 1971)
77 dB(A)
77 dB(A)