Graco Inc.

허스키 1050 이중 다이어프램 펌프  1 인치 용적형 이중 다이어프램 펌프

알루미늄, 폴리프로필렌, 전도성 폴리프로필렌, PVDF, 스테인리스강 및 하스텔로이 재질의 1 인치(25.4 mm) 연결부

정보 요청

당사의 1 인치(25.4 mm) 허스키 1050 이중 다이어프램 펌프에는 스톨이 전혀 없는 저맥동 에어 밸브가 탑재되어 전환이 원활하고 신속합니다. 알루미늄, 폴리프로필렌, 전도성 폴리프로필렌, PVDF, 스테인리스강 및 하스텔로이 재질의 유체 섹션을 이용할 수 있습니다.

Husky 1050 Aluminum Beauty
  • 온라인 허스키 선택기 도구를 사용하여 용도에 적합한 펌프 선정이 가능. 상기 관련 링크 상자 참조. 
  • 시장 주도 제품에 비해 30% 더 우수한 효율
  • 허스키 1040에 비해 유량 20% 증대
  • 동급 이중 다이어프램 펌프에 비해 최대 5배에 달하는 다이어프램 수명
  • 더욱 다양해진 재질로 용도가 무한

매뉴얼

Husky 1050 Air-Operated Diaphragm Pump
Maximum fluid working pressure
125 psi
8.6 bar, 0.86 MPa
Air pressure operating range
20-125 psi
1.4-8.6 bar, 0.14-0.86 MPa
Fluid displacement per cycle
0.17 gal
0.64 l
Air consumption
25 scfm at 70 psi, 20 gpm
0.7 m³/min at 4.8 bar, 0.48 MPa, 76 lpm
Maximum values with water as media under submerged inlet conditions at ambient temperature:
Maximum air consumption
67 scfm
1.9 m³/min
Maximum free-flow delivery
50 gpm
189 lpm
Maximum pump speed
280 cpm
280 cpm
Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables)
16 ft dry, 29 ft wet
4.9 m dry, 8.8 m wet
Maximum size pumpable solids
1/8 in
3.2 mm
Recommended cycle rate for continuous use
93 - 140 cpm
93 - 140 cpm
Recommended cycle rate for circulation systems
20 cpm
20 cpm
Sound Power*
at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm
78 dBa
78 dBa
at 100 psi (7.0 bar, 0.7 MPa) and full flow
90 dBa
90 dBa
Sound Pressure**
at 70 psi (4.8 bar, 0.48 MPa) and 50 cpm
84 dBa
84 dBa
at 100 psi (7.0 bar, 0.7 MPa) and full flow
96 dBa
96 dBa
Fluid temperature range
See Manual
See Manual
Air inlet size
1/2 npt(f)
1/2 npt(f)
Fluid inlet size
Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S)
1 in npt(f) or 1 in bspt
1 in npt(f) or 1 in bspt
Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F)
1 in raised face ANSI/DIN flange
1 in raised face ANSI/DIN flange
Fluid outlet size
Aluminum (1050A), Hastelloy (1050H) or Stainless Steel (1050S)
1 in npt(f) or 1 in bspt
1 in npt(f) or 1 in bspt
Conductive Poly (1050C), Polypropylene (1050P), or PVDF (1050F)
1 in raised face ANSI/DIN flange
1 in raised face ANSI/DIN flange
Weight
Aluminum (1050A)
23 lb
10.5 kg
Conductive Polypropylene (1050C) and Polypropylene (1050P)
18 lb
8.2 kg
Hastelloy (1050H)
41 lb
18.6 kg
PVDF (1050F)
26 lb
11.8 kg
Stainless Steel (1050S) with conductive polypropylene center
36.3 lb
16.5 kg
Stainless Steel (1050S) with polypropylene center
37.3 lb
16.9 kg
Stainless Steel (1050S) with aluminum center
41.4 lb
18.8 kg
Wetted parts include material(s) chosen for seat, ball, and diaphragm options, plus the pump’s material of construction
1050A
Aluminum
Aluminum
1050H
Hastelloy
Hastelloy
1050C and 1050P
Polypropylene
Polypropylene
1050F
PVDF
PVDF
1050S
Stainless Steel
Stainless Steel
Non-wetted external parts
Aluminum (1050A)
aluminum, coated carbon steel
aluminum, coated carbon steel
Hastelloy (1050H)
hastelloy, stainless steel, polypropylene or aluminum (if used in center section)
hastelloy, stainless steel, polypropylene or aluminum (if used in center section)
Plastic (1050P, 1050C, and 1050F)
stainless steel, polypropylene
stainless steel, polypropylene
Stainless Steel (1050S)
stainless steel, polypropylene or aluminum (if used in center section)
stainless steel, polypropylene or aluminum (if used in center section)
Reference Information
Maximum Storage Time (varies with conditions)
2 years
2 years
Maximum Lifetime (varies with operating conditions and maintenance)
10 years
10 years
Power Efficiency Factor (varies based on pump configuration, operating parameters, and material)
1.61 gal air consumed/1 gal fluid pumped at 70 psi
1.61 l air consumed/1 l fluid pumped at 4.8 bar
* Sound power measured per ISO-9614–2. ** Sound pressure was tested 3.28 ft (1 m) from equipment. All trademarks mentioned in this manual are the property of their respective owners.