Graco Inc.

SaniForce BES  빈 배출 시스템

수동으로 퍼내거나 빈을 쏟아 붓지 않고 300 갤론(1135 l) "백인빈(bag-in-the-bin)" 용기에서 점성 재료를 비우는데 적합합니다.

정보 요청

SaniForce 빈 배출 시스템(BES)을 이용하면 수동으로 퍼내거나 빈을 쏟아 붓지 않고 300 갤론(1,135.6 l) “백인빈(bag-in-bin)” 용기에서 재료를 효율적으로 비울 수 있으므로 시간과 비용이 절감됩니다.

빈을 완전히 비움으로써 수분 증발 비용을 절감하고 프로세스 제어가 향상되며 고가의 부스터 펌프가 필요치 않습니다.

19227
  • 최대 100 gpm(400 lpm)에 달하는 유량
  • 1200 psi(83 bar, 8.3 MPa)의 최대 유체 압력
  • 부스터 펌프가 필요치 않음
  • 대부분의 재료에 대하여 5분 미만의 배출 시간
  • 공압 또는 전자식 제어 장치로 제공
SaniForce BES 300

팽창식 와이퍼 실:

  • 오염물질의 용기 유입을 방지하는 치밀한 실을 형성하는 팽창식 와이퍼
  • 효율을 향상시키며 빈 교체 시간을 단축하는 팽창식 와이퍼 실
  • 램 플레이트 아래에 빈을 정확한 위치에 두지 않아도 되는 독자적인 부동 램 플레이트

SaniForce Bin Evacuation Systems, BES3xx and BES4xx
Maximum Working Fluid Pressure
120 psi
8.4 bar, 0.84 MPa
Compressed air requirement
80–120 psi
5.5–8.4 bar, 0.55–0.84 MPa
Fluid displacement (each pump)
1.03 gal/cycle
3.9 l/cycle
Flow rate @ 60 cpm
120 gpm
454 lpm
Pressure ratio
1:1
1:1
Air consumption (each pump)
0.8 scfm per gpm @ 70 psi
0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pump outlet
3 in tri-clamp
3 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Pneumatic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1/2 in npt(f)
1/2 in npt(f)
Electronic Control Panel
Maximum input air pressure
120 psi
8.4 bar, 0.84 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required
SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx
Compressed air requirement
80–100 psi
5.5–7 bar, 0.55–0.7 MPa
Pump outlet
2 in tri-clamp
2 in tri-clamp
Sound data
See your pump manual.
See your pump manual.
Wetted parts
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts.
Maximum Working Fluid Pressure
BESAxx and BESBxx
410 psi
28.3 bar, 2.8 MPa
BESExx and BESFxx
1450 psi
100.4 bar, 10.1 MPa
Fluid displacement (each pump)
BESAxx and BESBxx
0.23 gal/cycle
0.87 l/cycle
BESExx and BESFxx
0.14 gal/cycle
0.53 l/cycle
Flow rate @ 60 cpm
BESAxx
27.6 gpm
104.5 lpm
BESBxx
54 gpm
204.4 lpm
BESExx
17 gpm
64.3 lpm
BESFxx
34 gpm
128.7 lpm
Pressure ratio
BESAxx and BESBxx
4.3:1
4.3:1
BESExx and BESFxx
10:1
10:1
Air consumption (each pump)
BESAxx and BESBxx
1.8 scfm per gpm @ 70 psi
0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa
BESExx and BESFxx
3.5 scfm per gpm @ 70 psi
0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa
Pneumatic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
75 psi
5.2 bar, 0.5 MPa
Air inlet — air controls
3/4 in npt(f)
3/4 in npt(f)
Air inlet — pump
1 in npt(f)
1 in npt(f)
Electronic Control Panel
Maximum input air pressure
100 psi
7 bar, 0.7 MPa
Maximum up/down ram pressure
100 psi
7 bar, 0.7 MPa
External power supply
110 VA, 60 Hz, 15 amp maximum circuit breaker required
110 VA, 60 Hz, 15 amp maximum circuit breaker required