Graco Inc.

인라인 플로우 건 

저점도 실란트 및 접착제의 정밀 제어

정보 요청

손잡이:

  • 유리 또는 플라스틱 필러를 포함한 PVC 실러
  • 저-고 마모성 유체
  • 수계 또는 용제계 도료
  • 대부분 유체의 점도는 최대 150,000 센티포아즈

  • 수평 표면으로의 분배에 이상적
  • 작업자 편의를 위한 선택형 트리거 잠금장치와 행거 슬롯
  • 다양한 분배 요건을 위한 플랜지 또는 스레드 팁 수용
  • 204355은 견고한 경량 설계
  • 240199는 동급 최저 촉발력 및 무게

Ultra-Lite In-Line Flow Gun
Maximum working pressure
3400 psi
23.4 MPa, 234 bar
Maximum temperature
120°F
49°C
Flow rate at 2000 psi (14 MPa, 138 bar)*
Model 240–199: 158 oz/min
4.5 kg/min
Model 240–200: 154 oz/min
4.4 kg/min
4.4 kg/min
Outlet port size
1/4 npt(f) and flange
1/4 npt(f) and flange
Inlet port size
1/4 npt(f)
1/4 npt(f)
Dry weight
Model 240–199: 11.6 oz
325 gm
Model 240–200: 11.6 oz
325 gm
325 gm
Length
5.9 in
15.0 cm
Width
2.6 in
6.6 cm
Thickness
0.85 in
2.16 cm
Pressure vessel material
Aluminum
Aluminum
Pressure vessel ID
0.25 in
6.4 mm
Gun seat diameter
Model 240–199: 0.125 in
3.2 mm
Model 240–200: 0.203 in
5.2 mm
5.2 mm
Needle seat type
Model 240–199: Carbide ball
Model 240–199: Carbide ball
Model 240–200: 7 Tapered carbide
Inlet/outlet angle
20°
20°
Trigger force – breakaway @ 1000 psi (7 MPa, 69 bar)
Model 240–199: 1.6 lb
0.73 kg
Model 240–200: 3.8 lb
1.72 kg
1.72 kg
Trigger force – breakaway @ 2000 psi (14 MPa, 138 bar)
Model 240–199: 2.2 lb
1.0 kg
Model 240–200: 7.3 lb
3.31 kg
3.31 kg
Trigger force – sustaining
Model 240–199: 3.2 lb
1.45 kg
Model 240–200: 2.8 lb
1.27 kg
1.27 kg
Wetted parts
Aluminum, stainless steel, carbide, polyethylene, CV75
Aluminum, stainless steel, carbide, polyethylene, CV75
CV75 is a registered trademark of the International Seal Co., Inc.
* Flow rates were measured using PVC sealer dispensed through a 1/8 in. diameter orifice nozzle and z-swivel connected to inlet. Actual flow rates will vary depending on material type, fluid pressure, nozzle size, and system configuration.