Graco Inc.

Dispensit 1052 및 1053 밸브  정밀 분배 밸브

저-고점도 도료용 정변위 계량 로드 밸브

정보 요청

모델 1052와 & 1053 로드 정변위 밸브는 다양한 도료의 부피 계량 샷투샷(1052) 또는 비드(1053) 분배를 위해 설계되었습니다.

  • 다양한 습윤부 구성의 저-고점도 도료용
    연마재 충전 또는 부식성 도료용
  • 1052는 마이크로미터까지 분배량 조절이 가능한 공기 제어 밸브임
    정밀한 반복 가능 샷 분배용
  • 1053은 정밀한 프로그램식 샷 또는 비드 분배용 서보 구동 밸브임
  • 공기 및 전기 제어는 자동화 용도로 통합 가능
  • 정변위 계량
  • 다양한 습윤부

Dispensit 1053-10C
Maximum Ambient Temperature
110°F
43°C
Maximum Operating Temp
300°F
149°C
Maximum Outlet Fluid Working Pressure
2000 psi
14 MPa, 138 bar
Maximum Air Working Pressure
100 psi
0.7 MPa, 7 bar
Minimum Air Working Pressure
70 psi
480 kPa, 4.8 bar
Maximum Material Inlet Pressure
Metal Sleeves: 1200 psi
8 MPa, 83 bar
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.150 cc
0.002 cc to 3.150 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 15 cycles per minute (with standard Graco motor)
Up to 15 cycles per minute (with standard Graco motor)
Dimensions (H x L x W), height to end of material inlet
1 in.: 14.83 x 6.23 x 2.91 in.
377 x 158 x 74 mm
2 in.: 17.85 x 6.23 x 2.91 in
453 x 158 x 74 mm
453 x 158 x 74 mm
Graco-supplied Feed System Assemblies (depends on selected options):
Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
(1524 x 711 x 483 mm
Weight
Metering Valve: 3 - 5 lb
1.36 - 2.27 kg
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel

Dispensit 1052
Maximum Ambient Temperature
110°F
43°C
Maximum Operating Temp
150°F
65°C
Maximum Outlet Fluid Working Pressure
2000 psi
14 MPa, 138 bar
Maximum Air Working Pressure
100 psi
0.7 MPa, 7 bar
Minimum Air Working Pressure
70 psi
480 kPa, 4.8 bar
Maximum Material Inlet Pressure
Metal Sleeves: 1200 psi
8 MPa, 83 bar
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.600 cc
0.002 cc to 3.600 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 60 cycles per minute
Up to 60 cycles per minute
Dimensions (H x L x W), height to end of material inlet
16.13 x 5.52 x 2.75 in.
410 x 140 x 70 mm
Graco-supplied Feed System Assemblies (depends on selected options):
Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
(1524 x 711 x 483 mm
Weight
Metering Valve: 4 - 5 lb
1.81 - 2.27 kg
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel

Dispensit 1053-10B
Maximum Ambient Temperature
110°F
43°C
Maximum Operating Temp
150°F
65°C
Maximum Outlet Fluid Working Pressure
2000 psi
14 MPa, 138 bar
Maximum Air Working Pressure
100 psi
0.7 MPa, 7 bar
Minimum Air Working Pressure
70 psi
480 kPa, 4.8 bar
Maximum Material Inlet Pressure
Metal Sleeves: 1200 psi
8 MPa, 83 bar
Plastic Sleeves: 400 psi
2.8 MPa, 28 bar
2.8 MPa, 28 bar
Supplied Air Requirements.
1 to 3 cfm at 80 psi to 100 psi
1 to 3 cfm at 80 psi to 100 psi
Shot Size Range (depending on metering rods selected)
0.002 cc to 3.150 cc
0.002 cc to 3.150 cc
Maximum Cycle Rate (application dependent, heat required) .
Up to 15 cycles per minute (with standard Graco motor)
Up to 15 cycles per minute (with standard Graco motor)
Dimensions (H x L x W), height to end of material inlet
1 in.: 14.83 x 6.23 x 2.91 in.
377 x 158 x 74 mm
2 in.: 17.85 x 6.23 x 2.91 in
453 x 158 x 74 mm
453 x 158 x 74 mm
Graco-supplied Feed System Assemblies (depends on selected options):
Smallest: 22.5 x 10 x 4 in.
572 x 254 x 102 mm
572 x 254 x 102 mm
Largest: 60 x 28 x 19 in.
(1524 x 711 x 483 mm
(1524 x 711 x 483 mm
Weight
Metering Valve: 3 - 5 lb
1.36 - 2.27 kg
Wetted Parts
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel
Metering Valve: Hardened steel, 303/304, 404, UHMWPE, Tungsten, carbide, fluoroelastomer, EPDM, PTFE, Acetal. Graco-supplied Feed System Hoses and Fittings: Mild steel, 303/304, PTFE, buna, polyethylene, polypropylene. Graco-supplied Tanks: Polyethylene, 303/304, mild steel