Graco Inc.

Reactor E-20 et E-30  Doseurs électriques de mousse

Pour des applications avec un débit intermédiaire ou important de mousse isolante - applique jusqu'à 13,6 kg (30 lb) par minute

Où acheterDemander des informations

Équipé d'un stockage de données et de diagnostics système, les Reactor E-20 et E-30 offrent un contrôle total lors de la pulvérisation de la mousse isolante. Les caractéristiques avancées offrent une durée de vie plus longue, une durée de fonctionnement plus importante pendant votre journée de pulvérisation ainsi que la fiabilité et la durabilité Graco générales que vous en attendez.



Spray foam insulation

Equipped with material data and system diagnostics, the Reactor E-20 proportioner provides total control for spraying foam insulation. Advanced features provide longer equipment life, more uptime for your spray day, and the overall Graco reliability and durability you've come to expect.

Terminez votre travail plus vite qu'auparavant et de manière plus fiable

  • Des réchauffeurs hybrides puissants pour une meilleure régulation de la température
  • Des vannes de circulation équipées de joints résistants
  • Des cartes de commandes de réchauffeur modulaire d'une meilleure durée de vie qui réduisent les temps d'arrêt
  • Le transformateur de flexible chauffé ne requière pas de réglage de vanne
  • Facile à manipuler
  • Démontage rapide des bas de pompe pour un entretien plus facile
  • Commandes de température et de pression numériques



Reactor E-20, E-30, E-XP1, E-XP2 Series
Maximum Fluid Working Pressure
Models E-20 and E-30: 2000 psi, Model E-XP1: 2500 psi, Model E-XP2: 3500 psi
Models E-20 and E-30: 14 MPa, 140 bar, Model E-XP1: 17.2 MPa, 172 bar, Model E-XP2: 24.1 MPa, 241 bar
Maximum Fluid Temperature
190°F
88°C
Maximum Output
Model E-20: 20 lb/min, Model E-30: 30 lb/min, Model E-XP1: 1 gpm, Model E-XP2: 2 gpm
Model E-20: 9 kg/min, Model E-30: 13.5 kg/min, Model E-XP1: 3.8 liter/min, Model E-XP2: 7.6 liter/min
Output per Cycle (A and B)
Model E-20 and E-XP1: 0.0104 gal., Model E-30: 0.0272 gal., Model E-XP2: 0.0203 gal.
Model E-20 and E-XP1: 0.0395 liter, Model E-30: 0.1034 liter, Model E-XP2: 0.0771 liter
Amperage Requirement
See Table 1, page 20 in manual 312065
See Table 1, page 20 in manual 312065
Heater Power
Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts
Model E-20: 6000 Watts, Model E-30 and E-XP1: 10200 Watts, Models E-XP2 and E-30 with 15.3kW of heat: 15300 Watts
Sound Power, per ISO 9614–2
Model E-20: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 93.5 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 80 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 83.5 dB(A) at 3000 psi, 1.0 gpm
Model E-20: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 93.5 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 80 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 83.5 dB(A) at 21 MPa, 210 bar, 3.8 lpm
Sound Pressure 1 m from equipment
Model E-20: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-30: 83.6 dB(A) at 1000 psi, 3.0 gpm, Model E-XP1: 70.2 dB(A) at 2000 psi, 0.5 gpm, Model E-XP2: 73.6 dB(A) at 3000 psi, 1.0 gpm
Model E-20: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-30: 83.6 dB(A) at 7 MPa, 70 bar, 11.4 lpm, Model E-XP1: 70.2 dB(A) at 14 MPa, 140 bar, 1.9 lpm, Model E-XP2: 73.6 dB(A) at 21 MPa, 210 bar, 3.8 lpm
Fluid Inlets
3/4 npt(f), with 3/4 npsm(f) union
3/4 npt(f), with 3/4 npsm(f) union
Fluid Outlets
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter, Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum
1/4 npsm(m), with plastic tubing; 250 psi (1.75 MPa, 17.5 bar) maximum
Weight
Model E-20 and E-XP1: 342 lb, Model E-30: 400 lb, Models E-XP2 and E-30 with 15.3kW of heat: 438 lb
Model E-20 and E-XP1: 155 kg, Model E-30: 181kg, Models E-XP2 and E-30 with 15.3kW of heat: 198 kg
Wetted parts
Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Aluminum, stainless steel, zinc plated, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene
Voltage Tolerance Range (50/60 Hz)
200–240 V ac Nominal, 1 Phase
195–264 V ac, 50/60 Hz
195–264 V ac, 50/60 Hz
200–240 V ac Nominal, 3 Phase Delta
195–264 V ac, 50/60 Hz
195–264 V ac, 50/60 Hz
350–415 V ac Nominal, 3 Phase Wye (200–240 V ac Line-to-Neutral)
338–457 V ac, 50/60 Hz
338–457 V ac, 50/60 Hz
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.