Graco Inc.

Reactor H-25, H-40 et H-50  Doseurs hydrauliques de mousse

Pour des applications nécessitant de forts débits de mousse et des travaux de toiture - applique jusqu'à 23,6 kg (52 lb) par minute

Où acheterDemander des informations

Que ce soit pour des projets d'isolation en mousse résidentiels ou des travaux de toiture commerciaux de gros volume, la gamme Graco de doseurs hydrauliques de mousse Reactor offre puissance et fiabilité afin de toujours terminer vos tâches.

Reactor H-25 Une entrée de gamme en puissance.
Débit max : 10 kg (22 lb) / minute


Reactor H-40 Plus de débit pour des applications à fort volume. 
Débit max : 20 kg (45 lb) / minute


Reactor H-50 Le plus puissant doseur de mousse de Graco. 
Débit max : 23,6 kg (52 lb) / minute

Tous les doseurs Reactor séries H Graco offrent :

Graco Reactor H-25 Hydraulic Plural-Component Sprayer
  • Des commandes numériques de la chaleur et de la pression - elles vous permettent de programmer les températures et les pressions ainsi que surveiller les performances de la machine
  • Des bas de pompe à déplacement positif horizontal - simples à entretenir, ils permettent un changement plus doux afin de garantir un meilleur jet pulvérisé
  • Des réchauffeurs hybrides puissant - ils réchauffent rapidement le produit et gardent la température au niveau des points de réglage même pendant une pulvérisation aux débits maximum

Hydraulic, Heated, Plural Component Proportioner
U.S.
Metric
Maximum Fluid Working Pressure
Models H-25 and H-40: 2000 psi. Model H-50 1 phase: 1700 psi. Model H-50 3 phase: 2000 psi. Models H-XP2 and H-XP3: 3500 psi
Models H-25 and H-40: (13.8 MPa, 138 bar) Model H-50 1 phase:(11.7 MPa, 11.7 bar) Model H-50 3 phase:(13.8 MPa, 138 bar) Models H-XP2 and H-XP3: (24.1 MPa, 241 bar)
Fluid: Oil Pressure Ratio
Models H-25 and H-40: 1.91:1. Model H-50: 1.64:1. Models H-XP2 and H-XP3: 2.79:1
Models H-25 and H-40: 1.91:1. Model H-50: 1.64:1. Models H-XP2 and H-XP3: 2.79:1
Fluid Inlets
Component A (ISO): 1/2 npt(f), 250 psi maximum. Component B (RES): 3/4 npt(f), 250 psi maximum
Component A (ISO): 1/2 npt(f), (1.75 MPa, 17.5 bar) maximum. Component B (RES): 3/4 npt(f), (1.75 MPa, 17.5 bar) maximum
Fluid Outlets
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter. Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter. Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing, 250 psi maximum
1/4 npsm(m), with plastic tubing,(1.75 MPa, 17.5 bar) maximum
Maximum Fluid Temperature
190°F
(88°C)
Maximum Output (10 weight oil at ambient temperature)
Model H-25: 22 lb/min (10 kg/min) (60 Hz). Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz). Model H-50: 52 lb/min (24 kg/min) (60 Hz). Model H-40: 45 lb/min (20 kg/min) (60 Hz). Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Model H-25: 22 lb/min (10 kg/min) (60 Hz). Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz). Model H-50: 52 lb/min (24 kg/min) (60 Hz). Model H-40: 45 lb/min (20 kg/min) (60 Hz). Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Output per Cycle (A and B)
Models H-25 and H-40: 0.063 gal. Model H-50: 0.073 gal. Models H-XP2 and H-XP3: 0.042 gal.
Models H-25 and H-40: (0.23 liter). Model H-50: (0.28 liter). Models H-XP2 and H-XP3: (0.16 liter)
Line Voltage Requirement
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz. 400V 3 phase units: 338-457 Vac, 50/60 Hz
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz. 400V 3 phase units: 338-457 Vac, 50/60 Hz
Amperage Requirement
See Systems page in instruction manual.
See Systems page in instruction manual.
Heater Power (A and B heaters total, no hose)
See Systems page in instruction manual.
See Systems page in instruction manual.
Hydraulic reservoir capacity
3.5 gal.
(13.6 liters)
Recommended hydraulic fluid
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
Sound power, per ISO 9614-2
90.2 dB(A)
90.2 dB(A)
Sound pressure, 1 m from equipment
82.6 dB(A)
82.6 dB(A)
Weight
Units with 8.0 kW Heaters: 535 lb. Units with 12.0 kW Heaters: 597 lb. Units with 15.3 kW Heaters (H-25/H-XP2 models):562 lb. Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): 597 lb. Units with 20.4 kW Heaters: 597 lb.
Units with 8.0 kW Heaters: (243 kg). Units with 12.0 kW Heaters: (271 kg). Units with 15.3 kW Heaters (H-25/H-XP2 models): (255 kg). Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): (271 kg). Units with 20.4 kW Heaters: (271 kg)
Wetted Parts
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.