Graco Inc.

Suppresseurs de surtension  Des pulsations de pompe amorties pour une qualité de finition homogène

Ils permettent de réduire la pulsation afin d'obtenir une distribution homogène du produit et un jet pulvérisé uniforme

Où acheterDemander des informations

Besoin d'amortir les changements de pression dans votre système ? Les suppresseurs de surtension de Graco sont conçus pour répondre à vos besoins.

  • Ils permettent de réduire la pulsation afin d'obtenir une distribution homogène du produit et un jet pulvérisé uniforme
  • Ils réduisent la maintenance et les recharges de pression
  • Ils se rincent facilement ; cela permet des changements de couleurs simples et rapides
  • Ils permettent d'adapter les exigences générales du système aux options de raccords multiples de fluides
  • Ils limitent les variations de pression de votre système de fluide

Surge Tank Model 238986
Maximum Fluid Working Pressure
300 psi
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
300 psi
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
20 gpm
76 lpm
Maximum Operating Temperature
120° F
50° C
Wetted Parts
304 & 316 Stainless Steel, PTFE
304 & 316 Stainless Steel, PTFE
Surge Tank Model 238987
Maximum Fluid Working Pressure
300 psi
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
300 psi
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
20 gpm
76 lpm
Maximum Operating Temperature
120° F
50° C
Wetted Parts
304 & 316 stainless steel, PTFE
304 & 316 stainless steel, PTFE
Surge Tank Model 238988
Maximum Fluid Working Pressure
300 psi
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
300 psi
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
20 gpm
76 lpm
Maximum Operating Temperature
120° F
50° C
Wetted Parts
304 & 316 stainless steel, PTFE
304 & 316 stainless steel, PTFE
Surge Tank Model 233736
Maximum Fluid Working Pressure
360 psi
2.5 MPa, 25 bar
Maximum Air Inlet Pressure
218 psi
1.5 MPa, 15 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
Tank volume is 0.4 gal, Fluid does not flow through tank
Fluid does not flow through tank
Maximum Operating Temperature
176° F
80° C
Wetted Parts
Stainless steel, PTFE
Stainless steel, PTFE
Surge Tank Model 218509
Maximum Fluid Working Pressure
600 psi
4.2 MPa, 42 bar
Maximum Gas Charge Pressure
600 psi
4.2 MPa, 42 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
20 gpm
76 lpm
Maximum Operating Temperature
120° F
50° C
Wetted Parts
Carbon steel, electroless nickel-plated steel, UHMW polyethylene, fluoroelastomer, PTFE
Carbon steel, electroless nickel-plated steel, UHMW polyethylene, fluoroelastomer, PTFE
Surge Tank Model 220157
Maximum Fluid Working Pressure
600 psi
4.2 MPa, 2 bar
Maximum Gas Charge Pressure
600 psi
4.2 MPa, 42 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
15 gpm
57 lpm
Maximum Operating Temperature
120° F
50° C
Wetted Parts
304 and 17–4 PH stainless steel, UHMW polyethylene, fluoroelastomer, PTFE, tungsten carbide
304 and 17–4 PH stainless steel, UHMW polyethylene, fluoroelastomer, PTFE, tungsten carbide