Graco Inc.

Pompe à double membrane Husky 515  Pompe à double membrane de 12,7 mm (1/2 po.) à déplacement positif

Des raccords de 12,7 mm (1/2 po.) disponibles en polypropylène, acétal et PVDF

Où acheterDemander des informations

La pompe à double membrane Husky 515, 12,7 mm (1/2 po.), fonctionne avec une toute petite pression de 1,4 bar (0,14 MPa, 20 psi) ; elle peut être fabriquée en acétal pouvant être mis à la terre, en polypropylène et en PVDF.

  • Modèle en acétal que vous pouvez mettre à la terre
  • Une distribution allant jusqu'à 56,7 lpm (15 gpm)
  • Vanne d'air et clapets à bille faciles à entretenir
  • Une vanne d'air fiable pendant des années sans perte de performances

Manuels

Husky 515 Air-Operated Diaphragm Pumps
Maximum Fluid Working Pressure
100 psi
7 bar, 0.7 MPa
Air Pressure Operating Range
30 to 100 psi
2.1 to 7 bar, 0.2 to 0.7 MPa
Maximum air consumption
28 scfm
0.672 m³/minute
Maximum free-flow delivery
15 gpm
57 lpm
Maximum pump speed
400 cpm
400 cpm
Gallons (Liters) per cycle
0.04
0.15
Maximum suction lift (water with buna balls)
15 ft dry, 25 ft wet
4.5 m dry, 7.6 m wet
Maximum size pumpable solids
3/32 in
2.5 mm
Operating Temperature Range (These temperatures are based on mechanical stress only and may be altered significantly by pumping certain chemicals. Consult engineering guides for chemical compatibilities and temperature limits, or contact your Graco distributor. Santoprene® is a registered trademark of the Monsanto Company. Loctite® is a registered trademark of the Loctite Corporation.)
Minimum, all pumps
40°F
4°C
Maximum, acetal pumps
180°F
82°C
Maximum, polypropylene pumps
150°F
66°C
Maximum, aluminum, stainless steel, PVDF pumps
225°F
107°C
Sound power level (measured per ISO standard 9614–2)
At 70 psi (0.48 MPa, 4.8 bar) at 50 cycles per minute
77 dB(A)
77 dB(A)
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute
95 dB(A)
95 dB(A)
Sound pressure level (measured 1 m from pump)
At 70 psi (0.48 MPa, 4.8 bar) at 50 cycles per minute
67 dB(A)
67 dB(A)
At 100 psig (0.7 MPa, 7 bar) at maximum cycles per minute
85 dB(A)
85 dB(A)
Inlet/Outlet Sizes
Air inlet size
1/4 npt(f)
1/4 npt(f)
Air exhaust port size
3/8 npt(f)
3/8 npt(f)
Fluid inlet size
1/2 and 3/4 in npt(f) or bspt(f)
1/2 and 3/4 in npt(f) or bspt(f)
Fluid outlet size
1/2 and 3/4 in npt(f) or bspt(f)
1/2 and 3/4 in npt(f) or bspt(f)
Wetted Parts (in addition to ball, seat, and diaphragm materials, which vary by pump)
Polypropylene pumps
polypropylene, PTFE
polypropylene, PTFE
Acetal pumps
groundable acetal, PTFE
groundable acetal, PTFE
PVDF pumps
PVDF, PTFE
PVDF, PTFE
Non-wetted external parts
All pumps
polypropylene, stainless steel, polyester and aluminum (labels), nickel-plated brass
polypropylene, stainless steel, polyester and aluminum (labels), nickel-plated brass
Weight
Polypropylene pumps
6.5 lb
2.9 kg
Acetal pumps
7.8 lb
3.5 kg
PVDF pumps
8.5 lb
3.9 kg