Graco Inc.

SaniForce 3150 3A Double Diaphragm Pump

High Sanitation Double Diaphragm Drum

Up to a 4.0 inch tri-clamp connection, this easy to clean, quick knockdown air-operated double diaphragm pump has flow rates up to 150 gpm (568 lpm) and is 3A certified

Dónde comprarSolicitar información
Share |

The SaniFroce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the milk and dairy industry.

Mounted on a floor stand and equipped with a leak detector, the 3150 3A can be rotated to drain any excess sanitation chemicals used in the CIP (clean in place) process.

19147
  • Pumps up to 150 gallons per minute (568 lpm)
  • Easy to clean with its quick knock down, 185° rotating design
  • The only 3 inch pump certified by 3A for dairy and milk applications
  • Featuring our lube free, non-sticking air valve
19212

Designed to detect leaks!

  • Electronic leak detector is standard on the 3150 3A models
  • Designed to detect leaks caused when a diaphragm fails
  • Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
  • Uses an optical and conductivity sensor to ensure the utmost reliability
  • Powered by either 24v or 110/220v

 

18403

EPDM Overmolded Diaphragms:

  • Approved for 3A applications
  • Easy cleaning with smooth, flat surfaces and no recessed areas
  • No exposed diaphragm plates to prevent contaminant collection
Ver valores en unidades métricas. Ver valores en unidades de EE. UU..
SaniForce 3150 HS and 3150 3A Diaphragm Pumps
Maximum fluid working pressure
120 psi
8 bar, 0.8 MPa
Air pressure operating range
20–120 psi
1.4–8 bar, 0.14–0.8 MPa
Maximum air consumption
175 scfm
3
Air consumption at 70 psi, 60 gpm
50 scfm
3
Maximum free-flow delivery
150 gpm
570 lpm
Maximum pump speed
145 cpm
145 cpm
Gallons/liters per cycle*
1.0 g
3.9 l
Air inlet size
0.5 in npt(f)
0.5 in npt(f)
Maximum suction lift
Flapper
10 ft wet, 5 ft dry
3.5 m wet, 1.7 m dry
Ball
18 ft wet, 9 ft dry
5.5 m wet, 2.7 m dry
Maximum size pumpable solids
Flapper
2.5 in
63.5 mm
Ball
1.0 in
25.4 mm
Noise Data**
Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow
90 dB(A)
90 dB(A)
Sound power level
103 dB(A)
103 dB(A)
Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm
85 dB(A)
85 dB(A)
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings
PTFE
220°F
104°C
Santoprene®
180°F
82°C
Buna-N
180°F
82°C
Fluoroelastomer
250°F
121°C
3A Approved EPDM
275°F
135°C
Fluid inlet size
2.0 in sanitary flange
2.0 in sanitary flange
Fluid outlet size
2.0 in sanitary flange
2.0 in sanitary flange
Wetted Parts***
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177.
Wetted materials on all models
316 stainless steel, 3A Approved EPDM
316 stainless steel, 3A Approved EPDM
Wetted materials depending on model
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15%
Non-wetted external parts
300 series stainless steel, polyester (labels), LDPE foam (gasket)
300 series stainless steel, polyester (labels), LDPE foam (gasket)
Weight
All Models
145 lb
66 kg
Loctite® is a registered trademark of the Loctite Corporation.