Graco Inc.

Heated Fluid Regulator 

Provides precision dispense for Therm-O-Flow Systems

ForhandlereBe om informasjon
Del |

Maintains fluid pressure for consistent bead control of sealants and viscous materials

  • Provides consistent bead width without pump cross-over effects
  • Precise output and superior material delivery rates
  • Dual element heater provides controlled temperature – no material charring or plugging
  • For hot-melt adhesives and non-water-based temperature conditioned sealants and adhesives
  • Precision pressure control from 200 to 3000 psi

Heatd Fluid Regulator
Maximum Fluid Working Pressure
3000 psi
21 MPa, 210 bar
Regulated Fluid Pressure Range
200-3000 psi
1.4-21 MPa, 14-210 bar
Maximum Flow Rate
1.2 gpm with 7000 centipoise fluid at 350°F
4.56 liter/min with 7000 centipoise fluid at 176°C
Maximum Fluid Temperature
400°F
204°C
Voltage
230/240 Vac
230/240 Vac
Wattage
220 W
220 W
Maximum Current
1 A
1 A
Resistance temperature detector (platinum RTD; 0.00385 ohm/ohm/°C)
108.2 ohms @ 70°F
108.2 ohms @ 70°F
Heater resistance
Individually: 524 ohms, + 53/- 26 ohms. Wired in parallel: 262 ohms, + 26/- 13 ohms
Individually: 524 ohms, + 53/- 26 ohms. Wired in parallel: 262 ohms, + 26/- 13 ohms
Fluid Inlet
3/8 npt(f)
3/8 npt(f)
Fluid Outlet
3/8 npt(f)
3/8 npt(f)
Optional Fluid Outlet
1/4 npt(f)
1/4 npt(f)
Weigh
6.5 lb
2.9 kg
Wetted Parts
Tungsten Carbide, Copper, Cadmium and Zinc-Plated Steel, PTFE, Chrome-Plated Stainless Steel
Tungsten Carbide, Copper, Cadmium and Zinc-Plated Steel, PTFE, Chrome-Plated Stainless Steel