Graco Inc.

Reactor H-25, H-40 ve H-50  Hidrolik Köpük Oranlayıcıları

Yüksek çıkışlı köpük uygulamaları ve çatı kaplama projeleri için - dakikada 23,6 kg'ye (52 lb) kadar uygulanabilir

Satış NoktalarıBilgi İste

Mesken tipi köpük yalıtım projelerinden yüksek hacimli ticari çatı kaplama işlerine, Graco'nun Reactor Hidrolik Köpük Oranlayıcıları sınıfı işinizi yapmak için gereken güvenilirliği ve gücü sağlar.

Reactor H-25 Giriş düzeyinde, yine de güçlü.
Maks. çıkış: Dakikada 10 kg (22 lb).


Reactor H-40 Yüksek hacimli uygulamalar için daha fazla çıkış. 
Maks. çıkış: Dakikada 20 kg (45 lb).


Reactor H-50 Graco'nun en güçlü köpük oranlayıcısı. 
Maks. çıkış: Dakikada 23,6 kg (52 lb).

Tüm Graco Reactor H Serisi Oranlayıcıları şunları sağlar:

Graco Reactor H-25 Hydraulic Plural-Component Sprayer
  • Dijital ısı ve basınç kontrolleri - sıcaklıkları ve basınçları programlamanızı ve makine performansını izlemenizi sağlar
  • Yatay pozitif deplasmanlı pompalar - bakımı kolaydır ve en iyi püskürtme kalıbını korumak için sorunsuz değiştirme olanağı verir
  • Güçlü karma ısıtıcılar - malzemeyi hızla ısıtır ve en yüksek debide püskürtürken bile ayarlanan sıcaklık değerini korur

Hydraulic, Heated, Plural Component Proportioner
U.S.
Metric
Maximum Fluid Working Pressure
Models H-25 and H-40: 2000 psi. Model H-50 1 phase: 1700 psi. Model H-50 3 phase: 2000 psi. Models H-XP2 and H-XP3: 3500 psi
Models H-25 and H-40: (13.8 MPa, 138 bar) Model H-50 1 phase:(11.7 MPa, 11.7 bar) Model H-50 3 phase:(13.8 MPa, 138 bar) Models H-XP2 and H-XP3: (24.1 MPa, 241 bar)
Fluid: Oil Pressure Ratio
Models H-25 and H-40: 1.91:1. Model H-50: 1.64:1. Models H-XP2 and H-XP3: 2.79:1
Models H-25 and H-40: 1.91:1. Model H-50: 1.64:1. Models H-XP2 and H-XP3: 2.79:1
Fluid Inlets
Component A (ISO): 1/2 npt(f), 250 psi maximum. Component B (RES): 3/4 npt(f), 250 psi maximum
Component A (ISO): 1/2 npt(f), (1.75 MPa, 17.5 bar) maximum. Component B (RES): 3/4 npt(f), (1.75 MPa, 17.5 bar) maximum
Fluid Outlets
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter. Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Component A (ISO): #8 (1/2 in.) JIC, with #5 (5/16 in.) JIC adapter. Component B (RES): #10 (5/8 in.) JIC, with #6 (3/8 in.) JIC adapter
Fluid Circulation Ports
1/4 npsm(m), with plastic tubing, 250 psi maximum
1/4 npsm(m), with plastic tubing,(1.75 MPa, 17.5 bar) maximum
Maximum Fluid Temperature
190°F
(88°C)
Maximum Output (10 weight oil at ambient temperature)
Model H-25: 22 lb/min (10 kg/min) (60 Hz). Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz). Model H-50: 52 lb/min (24 kg/min) (60 Hz). Model H-40: 45 lb/min (20 kg/min) (60 Hz). Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Model H-25: 22 lb/min (10 kg/min) (60 Hz). Model H-XP2: 1.5 gpm (5.7 liter/min) (60 Hz). Model H-50: 52 lb/min (24 kg/min) (60 Hz). Model H-40: 45 lb/min (20 kg/min) (60 Hz). Model H-XP3: 2.8 gpm (10.6 liter/min) (60 Hz)
Output per Cycle (A and B)
Models H-25 and H-40: 0.063 gal. Model H-50: 0.073 gal. Models H-XP2 and H-XP3: 0.042 gal.
Models H-25 and H-40: (0.23 liter). Model H-50: (0.28 liter). Models H-XP2 and H-XP3: (0.16 liter)
Line Voltage Requirement
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz. 400V 3 phase units: 338-457 Vac, 50/60 Hz
230V 1 phase and 230V 3 phase units: 195-264 Vac, 50/60 Hz. 400V 3 phase units: 338-457 Vac, 50/60 Hz
Amperage Requirement
See Systems page in instruction manual.
See Systems page in instruction manual.
Heater Power (A and B heaters total, no hose)
See Systems page in instruction manual.
See Systems page in instruction manual.
Hydraulic reservoir capacity
3.5 gal.
(13.6 liters)
Recommended hydraulic fluid
Citgo A/W Hydraulic Oil, ISO Grade 46
Citgo A/W Hydraulic Oil, ISO Grade 46
Sound power, per ISO 9614-2
90.2 dB(A)
90.2 dB(A)
Sound pressure, 1 m from equipment
82.6 dB(A)
82.6 dB(A)
Weight
Units with 8.0 kW Heaters: 535 lb. Units with 12.0 kW Heaters: 597 lb. Units with 15.3 kW Heaters (H-25/H-XP2 models):562 lb. Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): 597 lb. Units with 20.4 kW Heaters: 597 lb.
Units with 8.0 kW Heaters: (243 kg). Units with 12.0 kW Heaters: (271 kg). Units with 15.3 kW Heaters (H-25/H-XP2 models): (255 kg). Units with 15.3 kW Heaters (H-40/H-XP3/H-50 models): (271 kg). Units with 20.4 kW Heaters: (271 kg)
Wetted Parts
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
Aluminum, stainless steel, zinc-plated carbon steel, brass, carbide, chrome, fluoroelastomer, PTFE, ultra-high molecular weight polyethylene, chemically resistant o-rings
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.