Graco Inc.

Viscount II 1200 ve 3100  Hidrolik Pistonlu Pompalar

Hidrolik pistonlu pompa tipo baskı (linotip) ve taş baskı (litografik) mürekkepleri için idealdir

Satış NoktalarıBilgi İste

Viscount II hidrolik hava motoru, Graco'nun hazırlama pistonlu pompalarından herhangi biriyle eşlendiğinde, pnömatik bir motorun kullandığı enerjinin %20'si ile çalışarak olağanüstü maliyet tasarrufları sağlar. Graco'nun patentli Viscount II hidrolik motoru, 800 veya 2100 tipi pompayla King, Bulldog veya Senator motorlarının yerini alır.

  • Temiz, sessiz ve verimli hidrolik güç
  • Uzun ömürlü sızdırmazlık tasarımıyla son derece dayanıklı bir hidrolik pompadır
  • Üst düzey verimli Viscount hidrolik motoru enerji maliyetlerini azaltır
  • Neoprin sızdırmazlıklı, paslanmaz çelikle ıslatılmış parçalar

Viscount II Hydraulic Motor
Maximum hydraulic fluid input pressure: Models 217022, 217338, 235345.
1500 psi
103 bar, 10 MPa
Maximum hydraulic fluid input pressure: Model 262818
1800 psi
124 bar, 12 MPa
Maximum hydraulic fluid input pressure: Model 24W139
1900 psi
13.1 MPa, 131 bar
Maximum hydraulic fluid flow
12 gpm
45.6 lpm
Hydraulic fluid consumption
1 gal per 5 cycles
3.8 l per 5 cycles
Effective piston area
4.9 sq in
31.6 sq cm
Piston rod diameter
2.5 in
64 mm
Stroke length
4.69 in
119.1 mm
Thrust at 1500 psi (10 MPa, 103 bar)
7300 psi
32 472 N
Weight
approximately 96 lb
43.5 kg
Loctite® is a registered trademark of the Loctite Corp.

Check-Mate 2100 Pumps
Ratio
24:1 (Quiet King Air Motor)
24:1 (Quiet King Air Motor)
Maximum fluid working pressure
2400 psi
16.6 MPa, 166 bar
Maximum air input pressure
100 psi
0.7 MPa, 7 bar
Pump cycles per 3.8 liters (1 gal.)
8
8
Recommended pump speed for continuous operation
50 cycles per min
50 cycles per min
Maximum flow
23.75 liters/min (7.5 gpm) at 50 cycles/min
23.75 liters/min (7.5 gpm) at 50 cycles/min
Air motor piston effective area
78.5 in.²
506 cm²
Stroke length
4.75 in.
120 mm
Displacement pump effective area
3.255 in.²
21 cm²
Maximum pump operating temperature
150°F
65.5°C
Air inlet size
3/4 npsm(f)
3/4 npsm(f)
Fluid outlet size
1–1/2” npt(m)
1–1/2” npt(m)
Weight
approx. 160 lb
approx. 73 kg
Displacement Pump Weight
approx. 37 kg
approx. 81 lb
Wetted parts
Carbon Steel; Chrome, Zinc, and Electroless Nickel Plating; 304 and 17–4 PH Grades of Stainless Steel; E52100 Alloy Steel; Ductile Iron; Acetal; PTFE; Ultra-High Molecular Weight Polyethylene
Carbon Steel; Chrome, Zinc, and Electroless Nickel Plating; 304 and 17–4 PH Grades of Stainless Steel; E52100 Alloy Steel; Ductile Iron; Acetal; PTFE; Ultra-High Molecular Weight Polyethylene