Graco Inc.

Graco 4-Ball Lower Selection Guide

Note: Graco recommends that ALL circulation pumps run at 12cpm or lower to minimize pump wear.

Required Flow Rate (gpm):

E-Flo Pump Selection Guide

Pump Assembly: GPM @ 12 CPM: CPM Notes Motor Speed(Hz):
E-Flo 1500 4.85 0 - 0
E-Flo 2000 7.2 0 - 0
E-Flo 3000 9.7 0 - 0
E-Flo 4000 13.6 0 - 0
*Minimum Hz is 6 Hz, Maximum Hz is 60 Hz.

E-Flo DC Pump Selection Guide

Pump Assembly: GPM @ 12 CPM: CPM Notes Approximate Pressure (psi):
E-Flo DC 750 2.43 0 - 0
E-Flo DC 1000 (1hp) 3.5 0 - 0
E-Flo DC 1000 (2hp) 3.5 0 - 0
E-Flo DC 1500 4.75 0 - 0
E-Flo DC 2000 6.4 0 - 0
*Max cycle rate is approximately 25 cpm, depending on available voltage.

NXT/President 4 Ball Pump Selection Guide

Pump Assembly: GPM @ 12 CPM: CPM Notes Lower:
NXT 2200 2:1 (2000 cc) 6.4 0 -
NXT 2200 3:1 (1500 cc) 4.6 0 -
NXT 6500 3.3:1 (4000 cc) 12.6 0 - High Flow Plus Lower
NXT 3400 3.5:1 (2000 cc) 6.4 0 -
NXT 2200 4:1 (1000 cc) 3.4 0 -
NXT 6500 4.4:1 (3000 cc) 9.5 0 - High Flow Plus Lower
NXT 3400 4.5:1 (1500 cc) 4.6 0 -
NXT 6500 6:1 (2000 cc) 6.4 0 - High Flow Plus Lower