Graco Inc.
Shipyard protective coating.jpg

Why Genuine Graco?

Designed, tested and built for reliability

  • Graco's engineering team designs and specifies every part that goes into a product or system
  • Parts are tested and re-tested for performance, long life and durability

Each quality part is dependent on another

  • Graco equipment is designed as a unified system
  • Each part carefully selected for peak performance
  • When any system part is replaced with a lower quality, non-Graco part, the performance of the system is jeopardized

You've worked hard to build your business. Don't risk your reputation on non-Graco replacement parts. Protect your investment and your company's future with genuine Graco parts. Learn more

Where to Buy Button
PageBreak_Rule_Dot_LeftNEW
Packings_BG_Materials.jpg


Optimize your pump's performance

Packings optimize your spray performance by sealing pressure and holidng material inside the pump. The tighter the seal, the better the performance. 

Xtreme_Seals

Xtreme Seals

  • Ideal for abrasive materials
  • Standard in Graco Xtreme NXT Spray Packages



TuffStack_Packings

Tuff-Stack

  • Excellent for chemical resistance and high temperature applications
  • Not ideal for abrasive materials
  • Won't swell in solvent
  • Won't stick to piston
X_Tuff_Packings

X-Tuff

  • Ideal for chemical resistance and durability in applications below 140°F (60°C)
  • Standard in Graco XP Plural Component Spray Packages
PageBreak_Rule_Dot_LeftNEW
_MG_1306





Rugged, yet comfortable to use

Graco Airless Spray Guns are made with pride in Graco's Sioux Falls, South Dakota manufacturing facility and built to exacting standards. Designed to handle the toughest protective coatings, their ergonomic design fits comfortably in your hand for less fatigue. 

  • XHF Gun: For high flow, high pressure applications, 7250 psi (500 bar)
  • XTR-7 Gun: 7250 psi (500 bar)
  • XTR-5 Gun: 5000 psi (345 bar)

PageBreak_Rule_Dot_LeftNEW















Graco XHD RAC SwitchTip and Guard

What you need to know about tip wear

Graco tips are made of the highest grade of tungsten carbide, the most abrasive-resistant material used in manufacturing airless spray tips. Even so, since all coatings contain solids that are abrasive, all spray tips will wear with normal use. It is important to understand the wear effect coatings have on spray tips.

Effects of tip wear

When a tip wears, the size of the tip orifice increases and the fan width decreases. Tip wear affects the spray pattern. If the fan size has lost 25% of its original size, then it is time to replace the spray tip. Continuing to spray would simply result in a poor quality spray job, and a substantial waste of coatings and labor.

Spray pattern

Example

When a tip that had a 12-inch fan pattern is reduced to a 9-inch fan when worn, it will put 40% more material on 25% less area. Overlapping to achieve a consistent mil thickness becomes impossible. The chart above illustrates the effects of a worn tip on a spray pattern.

Using a worn tip wastes material and labor

A good tip provides proper coverage and the coating is distributed evenly on the surface. A worn tip sprays an excessive mil build in the center of the spray pattern - which creates more work and wastes material.

PageBreak_Rule_Dot_LeftNEW
XtremeDuty_PurpleHose

Tested and proven

Graco puts its Xtreme-Duty high-pressure hoses through a unique safety testing regimen in our manufacturing facility. Each hose design must pass impulse testing, burst testing, flexibility testing and cold bending testing to give you the quality, durability and performance you expect.

  • Chemical-resistant hose cover withstands a variety of solvents, acids and bases
  • Hose cover stands up to sunlight, ozone, oxygen and extreme weather conditions
  • Color coded by pressure to take the guesswork out of using the right hose: 
    • Purple: 4500 psi (310 bar)
    • Gray: 5600 psi (386 bar)
    • Black: 7250 psi (500 bar)

PageBreak_Rule_Dot_LeftNEW
PumpLowers_Group





Built with pride, built to last

Graco pump lowers are machine tooled in our Minneapolis, Minnesota facility. The parts inside the lower are designed and tested for longevity and are proven to withstand more cycles than non-Graco pumps.

  • Quick knockdown design allows for easy maintenance – reducing your downtime so you can finish each job faster
  • Graco pump lowers are also designed so you can easily customize your sprayer for various coatings, without purchasing an additional sprayer

PageBreak_Rule_Dot_LeftNEW