Graco Inc.

FinishPro 390

Air-Assisted Airless Sprayer

Spray finishing materials in air-assisted airless mode or heavier materials in airless mode

Where to BuyRequest Info
Share |

Two sprayers in one!

The FinishPro 390 allows you to spray stains, enamels, varnishes, laquers, sealers, and other finishing materials at lower pressures in air-assisted airless mode - resulting in an exceptional finish AND supports up to a .020 tip, allowing you to spray a full range of paints, primers, and other heavier materials in airless mode.

  • Single selector switch allows you to change from airless to air-assisted spraying with the flip of a switch.
  • Includes Premium G40 Air-Assisted Airless Gun with RAC X SwitchTips
  • Dual filtration system combines a large capacity 100 mesh manifold filter with a secondary filter in the gun - preventing clogs that can slow down your production.
  • Proven Endurance Pump with long life V-Max Blue Packings, Chromex Rod and stainless steel cylinder allows for consistent priming and pumping of even the heaviest materials.
  • Lightweight, compact design with welded, durable, chromed frame is light enough for one person to handle.

Comes complete with:

  • Premium G40 Gun
  • One-gallon suction tube
  • RAC X FFT210 and LTX517 tips
  • Hoses (Bonded) 3/16 in x 50 ft (4.8 mm x 15 m) BlueMax II 3300-psi fluid and 3/8 in x 50 ft (9.5 mm x 15 m) air hose

View values in metric units. View values in U.S. units.
FinishPro 390/395
FinishPro 390
Power Requirements
100/120V AC, 50/60 hz, 15A, 1 phase
230 V AC, 50/60 hz, 10A, 1 phase
US/UK Max Tip Size
0.020
0.020
Europe/Asia/Australia Max Tip Size
0.021
0.021
US/UK Max Material Output
.43 gpm
1.6 lpm
Europe/Asia/Australia Max Material Output
.47 gpm
1.8 lpm
US/UK Maximum Material Pressure
2600 psi
180 bar
Europe/Asia/Australia Maximum Material Pressure
3300 psi
227 bar
US/UK Atomizing Air Output
3.2 cfm
3.2 cfm
Europe/Asia/Australia Atomizing Air Output
2.9 cfm
2.9 cfm
Air Pressure
35 psi
2.4 bar
Frame
Lo-boy
Lo-boy
Length
28 in
71 cm
Width
22 in
56 cm
Height
25 in
64 cm
Weight — bare
78 lb
35.5 kg
Pump Motor
5/8 HP DC
5/8 HP DC
Compressor Motor
1.0 HP AC Induction
1.0 HP AC Induction
Material Hose
3/16 in x 50 ft (blue)
3/16 in x 50 ft (blue)
Air Hose
3/8 in x 50 ft (clear)
3/8 in x 50 ft (clear)
Gun
G40 w RAC X tip
G40 w RAC X tip
Wetted Parts
zinc-plated carbon steel, nylon, stainless steel, PTFE, Acetal, chrome plating, leather, UHMWPE, aluminum, tungsten carbide
zinc-plated carbon steel, nylon, stainless steel, PTFE, Acetal, chrome plating, leather, UHMWPE, aluminum, tungsten carbide
FinishPro 395
Power Requirements
100/120V AC, 50/60 hz, 15A, 1 phase
230V AC, 50/60 hz, 10A, 1 phase
US/UK Max Tip Size
0.021
0.021
Europe/Asia/Australia Max Tip Size
0.023
0.023
US/UK Max Material Output
.47 gpm
1.8 lpm
Europe/Asia/Australia Max Material Output
.54 gpm
2.0 lpm
US Maximum Material Pressure
3300 psi
180 bar
UK Maximum Material Pressure
2800 psi
193 bar
Europe/Asia/Australia Maximum Material Pressure
3300 psi
227 bar
US/UK Atomizing Air Output
3.2 cfm
3.2 cfm
Europe/Asia/Australia Atomizing Air Output
2.9 cfm
2.9 cfm
Air Pressure
35 psi
2.4 bar
Frame
Hi-boy
Hi-boy
Length
28 in
71 cm
Width
23 in
58 cm
Height
32 in
80 cm
Weight — bare
96 lb
43.6 kg
Pump Motor
TEFC 7/8 HP DC
TEFC 7/8 HP DC
Compressor Motor
1.0 HP AC Induction
1.0 HP AC Induction
Material Hose
3/16 in x 50 ft (blue)
3/16 in x 50 ft (blue)
Air Hose
3/8 in x 50 ft (clear)
3/8 in x 50 ft (clear)
Gun
G40 w RAC X tip
G40 w RAC X tip
Wetted Parts
zinc-plated carbon steel, nylon, stainless steel, PTFE, Acetal, chrome plating, leather, UHMWPE, aluminum, tungsten carbide
zinc-plated carbon steel, nylon, stainless steel, PTFE, Acetal, chrome plating, leather, UHMWPE, aluminum, tungsten carbide